Abstract:Pyrolysis and gasification are efficient clean energy conversion technologies used in energy research. Clean utilization of biomass energy can effectively alleviate severe energy challenges in the world. In this study, wheat straw, peach wood, and bamboo were pyrolyzed in a quartz tube furnace, and the pyrolysis gas production and physical and chemical properties of the char products were analyzed systematically. The CO2 gasification per-formance of the pyrolyzed char was investigated experimentally. The results indicated that the pyrolysis tem-perature had a significant effect on char properties. A high pyrolysis temperature accelerates the gas release rate and improves the final gas production. As the pyrolysis temperature increased, the quality of the char decreased, and the O/C and H/C molar ratios of the biomass char decreased gradually. The char calorific value was also affected by the temperature. The Fourier Transform Infrared Spectroscopy (FTIR) results demonstrated that the functional groups of the biomass decomposed. Scanning Electron Microscope (SEM) images indicated that as the pyrolysis temperature increased, pore development expanded, and various folds appeared on the surface. The fractal box dimensions first increased and then decreased. The specific surface area and micropore volume of the char first increased and then decreased; however, the temperature at which the peak value occurred was slightly different. In the gasification experiment, the peach wood char prepared by pyrolysis at 600 degrees C had a superior gasification effect. Biomass with a lower ash content, higher O/C ratio, and more developed pore structure exhibited superior gasification performance. The conclusions of this study have important reference value for large scale, clean, and efficient utilization of biomass resources.

Study on product distributions and char morphology during rapid co-pyrolysis of platanus wood and lignite in a drop tube fixed-bed reactor.

Co-pyrolysis of Platanus Wood and Bituminous Coal: Product Distributions, Char Pore Analysis and Synergistic Effects

Investigation On Gaseous Product Distributions During Co-Pyrolysis Of Platanus Wood And Different Rank Coals From Northwestern China In A Drop Tube Furnace

Thermal behavior and the evolution of char structure during co-pyrolysis of platanus wood blends with different rank coals from northern China

Synergistic Effects from Fast Co-Pyrolysis of Lignin with Low-Rank Coal: On-line Analysis of Products Distribution and Fractal Analysis on Co-Pyrolysis Char

Co-pyrolysis Behavior of Microalgae Biomass and Low-Quality Coal: Products Distributions, Char-Surface Morphology, and Synergistic Effects.

Study on catalytic co-pyrolysis of physical mixture/staged pyrolysis characteristics of lignite and straw over an catalytic beds of char and its mechanism

Co-pyrolysis of low-rank coal and rice stalk: A comprehensive study on product distributions, product properties, and synergistic effects

Synergetic Effects During Co-Pyrolysis of Woody Biomass and Zhundong Coal

Characteristics of Chars Prepared by Low-Temperature Co-Pyrolysis of Lignite and Biomass

On-line Photoionization Mass Spectrometric Study of Lignin and Lignite Co-Pyrolysis: Insight into the Synergetic Effect

Effect of Microwave and Thermal Co-pyrolysis of Low-Rank Coal and Pine Wood on Product Distributions and Char Structure

Co-Pyrolysis Behaviors of Saw Dust and Shenfu Coal in Drop Tube Furnace and Fixed Bed Reactor

Comparative Investigation on the Pyrolysis of Crop, Woody, and Herbaceous Biomass: Pyrolytic Products, Structural Characteristics, and CO2 Gasification

Structural and Gasification Kinetic Studies on Co-pyrolysis Chars of Coal and Biomass

Product Distribution During Co-Pyrolysis of Bituminous Coal and Lignocellulosic Biomass Major Components in A Drop-Tube Furnace

Investigation on Synergistic Effects and Char Morphology During Co-pyrolysis of Poly(vinyl Chloride) Blended with Different Rank Coals from Northern China

Studies of Fast Co-Pyrolysis of Oil Shale and Wood in a Bubbling Fluidized Bed

A comparative investigation into the formation behaviors of char, liquids and gases during pyrolysis of pinewood and lignocellulosic components

The core factors in determining product distributions during pyrolysis: The synergistic effect of volatile-char interactions and temperature

Volatile-char interactions during biomass pyrolysis: Reactor design toward product control