Mechanism of Adsorption Affinity and Capacity of Mg(Oh)(2) to Uranyl Revealed by Molecular Dynamics Simulation

Xinwen Ou,Zanyong Zhuang,Jingyuan Li,Feng Huang,Zhang Lin

DOI: https://doi.org/10.1039/c6ra00384b

IF: 4.036

2016-01-01

RSC Advances

Abstract:The redistribution of surface OH groups results in a negative charge site which facilitates the uranyl adsorption.

What problem does this paper attempt to address?

Interfacial Engineering Improved the Selective Extraction of Uranyl from Saline Water by Nano-Mg(Oh)(2) and the Underlying Mechanism

Zanyong Zhuang,Xinwen Ou,Jingyuan Li,Yuan Zhou,Zhihong Zhang,Shengfa Dong,Zhang Lin

DOI: https://doi.org/10.1021/acssuschemeng.5b00840

IF: 8.4

2016-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Abundant salts and complex constituents pose challenges to the enrichment of trace-level uranyl from field water samples. On the basis of the chemical behavior of the uranyl cation in several physical chemical conditions (in the presence of MgCl2 etc.), we developed a facile and green strategy to improve the uranyl extraction from field water samples, different from the traditional way with organic impregnation. In our systems about nano-Mg(OH)(2) treating salt lake brine, when the adsorbent is pretreated with a trace amount of UO22+ ion, the ability to extract uranyl from brine can increase by 2-5 times. The molecular dynamics simulation and time-resolved laser-induced fluorescence spectroscopy analysis show that, in the preadsorption stage, UO22+ ions can steadily bind to the Mg(OH)(2) (001) surface because of the interaction with surface hydroxyl groups. When pretreated Mg(OH)2 was exposed to brine, the coordination interaction between the preloaded UO22+ ion and the [UO2(CO3)(x)((2x-2)-)] in solution engenders good selectivity and affinity for uranyl over competitive ions in brine. Besides, the coordination number of UO22+ by carbonate oxygen is large, which further facilitates subsequent adsorption. Such strategy does not introduce other impurities and can apply to metal-oxides-type adsorbents, e.g., TiO2. This study should shed light on further improvement of efficient uranyl extraction from field samples and give insights into the mechanism understanding of uranyl adsorption in real systems.
Atom-scale understanding the adsorption mechanism of uranyl in the interlayer of montmorillonite: Insight from DFT + U calculation

Nan Li,Jin Wang,Junxia Wang,Yan Wang,Yuhao Fu,Jianzhou Zhao

DOI: https://doi.org/10.1016/j.apsusc.2022.155910

IF: 6.7

2022-12-07

Applied Surface Science

Abstract:In this work, the adsorption mechanism of uranyl with varied water ligands (UO 2 2+ · x H 2 O; x = 3, 4 and 5) in the interlayer of montmorillonite (MMT) was studied theoretically based on the first-principles DFT + U calculation. The adsorption energy, adsorption geometry configuration and electronic properties (PDOS, electron density difference, Bader charge, ELF) of MMT-UO 2 2+ · x H 2 O systems were investigated systematically. It was found that UO 2 2+ ·5H 2 O and UO 2 2+ ·3H 2 O are more likely adsorbed above O M (the bridging oxygen on the six-membered ring of SiO 4 tetrahedra sheet, signed as T site) and UO 2 2+ ·4H 2 O is preferentially adsorbed between O M atoms (signed as B site). DFT + U calculations showed that the migration of uranyl in the interlayer of MMT could be inhibited by forming hydrogen bonds through O M and water ligands. In addition, with the decrease of water ligands, the positive charge of UO 2 2+ increases and UO 2 2+ is directly exposed to the internal surface of MMT. Resultantly, the U atom in UO 2 2+ can form weak chemical bond with O M , thus blocking the migration of UO 2 2+ . In summary, this work can provide insights into the adsorption of uranyl in the interlayer of MMT at the microscopic atom-scale, which contributes to understanding the experimentally based internal surface complexation model.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Adsorption of uranyl on hydroxylated α-SiO₂(001): a first-principle study.

Dongqi Wang,Z. Chai,Hui Wang

DOI: https://doi.org/10.1039/c4dt02872d

IF: 4

2015-01-28

Dalton Transactions

Abstract:The adsorption of [UO2(H2O)5](2+) on a hydroxylated α-SiO2(001) surface was studied by periodic density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulation. The effects of pH, CO2, aqua solution and anionic ligands (OH(-), NO3(-) and Cl(-)) on the adsorption geometry and stability were investigated. The results show that the adsorption of uranyl on a hydroxylated α-SiO2(001) surface leads to the formation of inner-sphere complexes, in which the bidentate complex at the double deprotonated site is most favored. The binding strengths of bidentate and monodentate complexes at the same site are similar, and they become weaker as the number of protons increases at the adsorption site, indicating an enhancement of the adsorption strength at higher pH values within a certain range. Strong chemical interaction plays an important role in all inner-sphere complexes. The hydrogen bonds are formed between uranyl and the hydroxylated surface in all inner- and outer-sphere complexes. The presence of CO2 weakens the adsorption of uranyl on the surface by forming uranyl carbonate (CO3(2-), HCO3(-)) complexes. The effect of the anion ligands depends on their charged state and their concentration in solutions. The explicit treatment of water environment in the models has a slight effect on the adsorption configuration. These results are consistent with the experimental observations.

Chemistry,Medicine,Materials Science
A Molecular Dynamics Study of Uranyl-Carbonate Complexes Adsorbed on Basal Surfaces of Clay Minerals

Lei Li,Xiandong Liu,Xiancai Lu

DOI: https://doi.org/10.1007/s11631-014-0030-6

2015-01-01

Abstract:We use molecular dynamics simulation to study the mechanisms involved in the adsorption of aqueous uranyl species (UO22+) to the basal surfaces of clay minerals, including kaolinite, pyrophyllite and montmorillonite. Uranyl ion can form various complexes with carbonates, namely, [UO2(H2O)(5)](2+), [UO2(H2O)(3)(CO3)], [UO2(H2O)(2)(CO3)(2)](2-), [UO2(CO3)(3)](4-). The simulations show that at aqueous clay interfaces, both uranyl species and surface type control the adsorption pattern. The non-carbonato and monocarbonato uranyl species can form outer-sphere complexes on siloxane surfaces through electrostatic interaction, but the dicarbonato and tricarbonato uranyl complexes rarely adsorb on the siloxane surfaces. Strong outer-sphere adsorptions of the uranyl-carbonate complexes on gibbsite surfaces are observed, which are fixed by hydrogen bonds between the ligands (carbonate and/or H2O) and surface hydroxyls. The sorption behaviors derived in this study provide new insights into understanding the migration and enrichment of uranium and other radionuclides.
Adsorption of uranyl ion on peat

Chuan-xi WEN,Zhi-rong LIU,Guo-hui SANG

DOI: https://doi.org/10.3969/j.issn.1000-8063.2010.02.005

2010-01-01

Abstract:A method of static adsorption was used to study the adsorption of uranyl ion on peat.The effects of the solid-to-liquid ratio,time,pH and ionic strength on adsorption are discussed.The adsorption isotherms of different ionic strengthes were measured under the ambient temperature.The results indicate that the adsorption of uranyl ion on peat is strongly affected by pH values and weakly dependent on ionic strength.The kinetic process of adsorption can be described by the Freundlich equation excellently.Adsorption of uranyl ion is mainly dominated by the surface complexation.
Surface defects enhance the adsorption affinity and selectivity of Mg(OH)2 towards As(v) and Cr(vi) oxyanions: a combined theoretical and experimental study

Xinwen Ou,Xueming Liu,Weizhen Liu,Wencong Rong,Jingyuan Li,Zhang Lin

DOI: https://doi.org/10.1039/c8en00654g

2018-01-01

Abstract:The surface defects of adsorbents are generally considered to be the active sites for adsorbates, and the adsorption behaviors of a variety of pollutants in wastewater are strongly influenced by the surface defects of the adsorbents. With simple chemical and structural properties, nano-Mg(OH)(2) exhibits a high adsorption affinity and selectivity to heavy metals from wastewater. The insight into the surface complex structures of heavy metals on the Mg(OH)(2) surface is fundamental for both the mechanism and application of defective adsorbents in wastewater treatment. In this study, the impact of surface defects of Mg(OH)(2) nanoplates on the structure, energy, and adsorption amounts of toxic heavy metal oxyanions (HAsO42- and CrO42-) was investigated by combining the first-principles calculations and batch experiments. The first-principles calculations illustrated that the heavy metal oxyanions can be steadily incorporated into the surface defects to form inner-sphere complexes. The incorporated heavy metal oxyanions have strong charge-charge and chemical bonding interactions with the surface defect sites, which are much stronger than the hydrogen bonding interactions with the surface OH sites. Moreover, the adsorption affinity of surface defects towards heavy metal oxyanions is stronger than that towards other oxyanions (e.g. SO42- and NO3-), indicating the high adsorption selectivity of heavy metal oxyanions over other oxyanions. Batch adsorption experiments verified that the adsorption of defect-rich Mg(OH)(2) adsorbents towards heavy metal ions, e.g., As(v) and Cr(vi), was favorable even under the condition of low concentration (mg L-1 level). These findings reveal the significance of surface defects of Mg(OH)(2) for extracting As(v) and Cr(vi) from low-concentration solutions. The proposed strategy of surface defect-fabrication should provide a useful insight into designing effective adsorbents for the selective extraction of heavy metal oxyanions at low concentration.
Behind adhesion of uranyl onto montmorillonite surface: a molecular dynamics study

W Yang,A Zaoui

DOI: https://doi.org/10.1016/j.jhazmat.2013.07.021

2013-10-15

Abstract:We have performed molecular dynamics simulations to investigate the adsorption of radionuclide elements species onto substituted Montmorillonite (001) surface in the presence of different counterions. The structure and the dynamics of uranyl ion as well as its aquo, chloride ion, and carbonate complexes are analyzed. In addition, we have studied the surface energy between layered Montmorillonite sheets and the work of adhesion between radionuclide and charged Montmorillonite. The clay model used here is a Wyoming-type Montmorillonite with 0.75e negative charge per unit cell resulting from substitutions in Octahedral and Tetrahedral sheets. The system model was constructed based on CLAYFF force field potential model. To evaluate the thermodynamic work of adhesion, each surface and clay layer regions are converted to a thin film model. One and two species of radionuclide elements (UO2(H2O)5,UO2CO3(H2O)5, and UO2Cl2(H2O)5) were deposited near the clay surface in a pseudo-two-dimensional periodic cell. Analysis shows that the uranyl ion structure is preserved with two axial oxygen atoms detected at 1.8Å. Radial distribution functions results indicate that average UOw distances are 2.45-2.61Å, and 2.29-2.40Å for UOc distance. Average UCl distances are 2.78-3.08Å, which is relatively larger than that of Uranium atom-Oxygen atom because of electrostatic factors.
Mechanistic Understanding of Uranyl Ion Complexation on Montmorillonite Edges: A Combined First-Principles Molecular Dynamics-Surface Complexation Modeling Approach

Chi Zhang,Xiandong Liu,Ruth M. Tinnacher,Christophe Tournassat

DOI: https://doi.org/10.1021/acs.est.8b02504

IF: 11.4

2018-01-01

Environmental Science & Technology

Abstract:Systematic first-principles molecular dynamics (FPMD) simulations were carried out to study the structures, free energies, and acidity constants of UO22+ surface complexes on montmorillonite in order to elucidate the surface complexation mechanisms of the uranyl ion (UO22+) on clay mineral edges at the atomic scale. Four representative complexing sites were investigated, that is, ≡Al(OH)2 and ≡AlOHSiO on the (010) surface and ≡AlOHOa and ≡SiOOa on the (110) surface. The results show that uranyl ions form bidentate complexes on these sites. All calculated binding free energies for these complexes are very similar. These bidentate complexes can be hydrolyzed, and their corresponding derived p Ka values (around 5.0 and 9.0 for p Ka1 and p Ka2, respectively) indicate that UO2(OH)+ and UO2(OH)2 surface groups are the dominant surface species in the environmental pH range. The OH groups of UO2(OH)2 surface complexes can act as complexing sites for subsequent metals. Additional simulations showed that such multinuclear adsorption is feasible and can be important at high pH. Furthermore, FPMD simulation results served as input parameters for an electrostatic thermodynamic surface complexation model (SCM) that adequately reproduced adsorption data from the literature. Overall, this study provides an improved understanding of UO22+ complexation on clay mineral edge surfaces.
Adsorption of U(VI) on Montmorillonite in the Presence of Ethylenediaminetetraacetic Acid

Wanqiang Zhou,Jingyi Wang,Jiangang He,Xiaoyu Yang,Yanlin Shi,Xiangyun Wang,Chunli Liu

DOI: https://doi.org/10.1016/j.colsurfa.2019.123929

IF: 5.518

2019-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:The adsorption, diffusion and migration behaviors of uranium may be highly influenced by organics in natural environments. Ethylenediaminetetraacetic acid (EDTA) is one of the most important small organics in groundwaters, especially at the radioactive contaminated sites. In this work, we studied U(VI) adsorption on montmorillonite in the presence of EDTA with batch method. Our results indicated that U(VI) adsorption was significantly different in the presence and absence of EDTA. The equimolar EDTA inhibited the U(VI) adsorption at a wide pH range while only enhanced the adsorption at pH (similar to)7.0. The pseudo-second-order model showed the best fit for describing the adsorption kinetics in comparison with three other popular models. The influence of different addition sequences on adsorption of EDTA and U(VI) on montmorillonite was also investigated, and the results indicated that EDTA played the role as a bridge between montmorillonite surface sites and U(VI). The X-ray photoelectron spectroscopy and attenuated total reflectance Fournier-transform infrared spectroscopy also suggested the formation of EDTA-bridge inner-sphere surface complexes on montmorillonite. This work provides the valuable information of U(VI) adsorption on montmorillonite in the presence of EDTA, and helps us understand the diffusion and migration behaviors of uranium in natural environments.
Dynamic Behavior of Interfacial Water on Mg(OH)2 (001) Surface: A Molecular Dynamics Simulation Work

Xinwen Ou,Jingyuan Li,Zhang Lin

DOI: https://doi.org/10.1021/jp509373d

2014-01-01

The Journal of Physical Chemistry C

Abstract:As a chemical and structural simple hydrophilic material, Mg(OH)(2) exhibits great potential in water environment remediation. In this work, we use molecular dynamics (MD) simulation to investigate the distribution of water molecules on the Mg(OH)(2) (001) surface as well as the dynamic behaviors of interfacial water. Even though Mg(OH)(2) substrate can considerably affect the density profile of water molecules as well as the water dipole orientations, no specific adsorption sites for water can be observed on the surface of Mg(OH)(2). Meanwhile, the interaction of water molecules with Mg(OH)(2) substrate does not disturb the hydrogen bonds between interfacial water molecules. More interestingly, the substrate has modest effect on the dynamic behaviors of interfacial water, e.g., the residence time, hydrogen bond lifetime, and self-diffusion coefficient, which is in sharp contrast to many other hydrophilic materials.
2D-layered Mg(OH)2 material adsorbing cellobiose via interfacial chemical coupling and its applications in handling toxic Cd2+ and UO22+ ions

Xin-Yu Wang,Yang Hao,Hong-Bo Zhao,Yuan-Ru Guo,Qing-Jiang Pan

DOI: https://doi.org/10.1016/j.chemosphere.2021.130617

IF: 8.8

2021-09-01

Chemosphere

Abstract:The interfacial chemistry of nanocomposite materials is of overarching importance in the separation and purification science; moreover, its understanding helps to guide synthesis, clarify structure-property relationship and unearth novel applications. However, the composites feature rather complicated local structures and hydrogen bonds are often involved in the interface and the vicinity of active sites. In this regard, density functional theory first-principle calculations associated with experimental study have synergistically examined two-dimensional (2D) magnesium hydroxide material with different layers and their adsorption toward cellobiose. Hydrogen bonds are found responsible for the interfacial coupling, which make it vital to cover the dispersion correction in the calculation. The average adsorption energy ranges from -0.29 to -0.35 eV, falling well within the range of reported hydrogen-bonding strength. On the basis of calculated structural/interfacial properties and experimental findings, the 2D Mg(OH)2 in terms of three-layer model was unraveled to substitute toxic Cd2+ ion and sorb radioactive UO22+ that is coordinated by water and hydroxyl groups. These reactions are thermodynamically feasible. The ion-exchanging mechanism was proposed for cadmium removal and the outer-sphere adsorption one for uranium extraction.

environmental sciences
Effective Adsorption of U(VI) from Aqueous Solution Using Magnetic Chitosan Nanoparticles Grafted with Maleic Anhydride: Equilibrium, Kinetic and Thermodynamic Studies

Hamza Shehzad,Limin Zhou,Zhao Li,Quanshui Chen,Yun Wang,Zhirong Liu,Adesoji A. Adesina

DOI: https://doi.org/10.1007/s10967-017-5647-6

2017-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:The in situ formed magnetite nanoparticles was encapsulated by maleated chitosan to synthesize a novel magnetic chitosan nano-sorbent (MCN-MA) for the effective sorption of uranium. The sorption kinetics could be described by the pseudo-second-order model, whereas the sorption isotherms could be fitted to the Langmuir model (q (m) = 187.9 mg/g). The MCN-MA showed higher U(VI) sorption capacities (compared to MCN) due to high affinity of carboxylate groups introduced from grafting maleic anhydride. Thermodynamic parameters indicate that U(VI) sorption is endothermic and feasible. The nano-size and magnetic property of the MCN-MA allow its efficient U(VI) sorption and facile magnetic separation from wastewaters.
Characteristics of equilibrium and kinetic for U(VI) adsorption using novel diamine-functionalized hollow silica microspheres

Hongbin Zou,Limin Zhou,Zhiwei Huang,Zhirong Liu,Taian Luo

DOI: https://doi.org/10.1007/s10967-016-4937-8

2016-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:The diamine-functionalized hollow silica microspheres (DA-HSM) were successfully synthesized for highly efficient sorption of U(VI). The sorption of U(VI) on DA-HSM may be proceeded through anion-exchange and adduct-type mechanism at low pH and amine-U(VI) chelation at high pH. The sorption kinetic could be described by the pseudo-second-order model; whereas the sorption isotherms could be fitted by the Langmuir model with the maximum mono-layer sorption capacity of 126.6 mg/g at 298 K. U(VI) sorption on DA-HSM was endothermic, spontaneous, and feasible in nature. The DA-HSM could be regenerated and reused without significant reduction of the sorption capacities.
Study on the interaction of uranyl with sulfated beta-cyclodextrin by affinity capillary electrophoresis and molecular dynamics simulation.

Linnan Li,Yiding Zhang,Xianjiang Li,Sensen Shen,Hexiang Huang,Yu Bai,Huwei Liu

DOI: https://doi.org/10.1002/elps.201600074

2016-01-01

Electrophoresis

Abstract:The study on sulfated beta-cyclodextrin binding to uranyl ion helps to get a better understanding of uranyl compounds' intermolecular interaction mechanism and facilitates the structure-based design of uranyl binding molecules. Here we investigated the electromigration of the inclusion complex by using affinity capillary electrophoresis in acidic solution. The binding constant was determined to be logK = 2.96 ± 0.02 (R2 = 0.996) through nonlinear regression approach. The possible configurations and structural features of the inclusion complex were further studied by molecular dynamics simulation. The results suggest the distinctions of coordination environment and hydration compared with bare uranyl ion in aqueous solution. Thus, two water oxygen atoms coordinated with uranyl in the first hydration shell at 2.55 angstrom instead of five in the same distance range. The binding free energy was calculated as -12.10 ± 1.46 kcal/mol by means of thermodynamic perturbation method. The negative value indicates that the process of S-β-CD capture uranyl ion in the aqueous media is spontaneous.
Functionalization of Mesoporous Fe3O4@SiO2 Nanospheres for Highly Efficient U(VI) Adsorption

Hao Zheng,Limin Zhou,Zhirong Liu,Zhanggao Le,Jinbo Ouyang,Guolin Huang,Hamza Shehzad

DOI: https://doi.org/10.1016/j.micromeso.2018.12.038

IF: 5.876

2018-01-01

Microporous and Mesoporous Materials

Abstract:Novel mesoporous Fe3O4@SiO2 nanospheres (MSN) functionalized with N/O-containing groups (MSN-DA and MSN-DATA) were prepared and characterized. Both MSN-DA and MSN-DATA were core-shell magnetic nanospheres, and they had high affinity for U(VI) sorption. The XPS analysis indicated that U(VI) sorption on both sorbents (MSN-DA and MSN-DATA) was mainly through the inner-complexation mechanism, but for MSN-DATA, cation-exchange also played a significant role. The maximum sorption capacities reached 139.1 mg/g for MSN-DA and 103.9 mg/g for MSN-DATA. Both the functionalized sorbents exhibited fast sorption rate, excellent selectivity to co-existing cations, and good reusability for uranium sorption, however, MSN-DA was more effective for U(VI) sorption (compared to MSN-DATA) due to less molecular hindrance and more amine/amino groups for chelating U(VI). These findings indicated that MSN-DA and MSN-DATA could be potentially used for the efficient sorption/separation of U(VI) from wastewater.
Adsorption equilibrium and kinetics of uranium onto porous azo-metal–organic frameworks

Shujuan Liu,Mingbiao Luo,Jianqiang Li,Feng Luo,Lin Ke,Jianguo Ma

DOI: https://doi.org/10.1007/s10967-016-4852-z

2016-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:A Zn(II)-based metal–organic frameworks (MOFs) containing azo-functionalized pores was synthesized by solvothermal process. Batch adsorption experiments for the removal of U(VI) were performed with the MOFs. The adsorption data were successfully modeled by the Langmuir and D–R isotherms, suggesting a chemisorption with monolayer homogeneous adsorption. The thermodynamics research shows the adsorption being a feasible and endothermic process. The larger experimental adsorption capacity of 312.32 mg g −1 suggests that MOFs may be a potential adsorbent material for removal of U(VI) ions from waste water and further development would be warranted in future.
Interaction mechanism of uranium(VI) with chitosan hydrogel: Insights from the perspective of adsorbent and adsorbate

Jiaqi Yu,Jun Wang,Jiahui Zhu,Ying Li,Qi Liu,Jing Yu,Rumin Li,Peili Liu,Hongsen Zhang

DOI: https://doi.org/10.1016/j.desal.2022.116194

IF: 11.211

2023-01-15

Desalination

Abstract:Chitosan-based hydrogels have been used as adsorption materials and offered remarkable prospects, due to their abundant, biodegradable, inexpensive features and rich amino and hydroxyl groups. In this work, the structure of chitosan (CS) hydrogel and its adsorption performance toward uranyl species (UO22+ and UO2(CO3)34−) were comprehensively investigated on the basis of various characterizations and theoretical simulation. Systematic experiments show that CS hydrogel bears excellent adsorption performance for low-concentration UO2(CO3)34− solution in column adsorption experiment and the removal efficiency is >99 %. The outer-sphere complexation adsorption has been postulated for the case of UO2(CO3)34−, where intermolecular hydrogen bonds dominate in the adsorption. Differently, the inner-sphere one is attributed for capturing UO22+ species, which is coordinated by CN, -NH2 and -OH groups of CS hydrogel. Since the 3D network structure of CS hydrogel is prone to couple with water, it is difficult for U(VI) to enter inside the hydrogels, which reduces the adsorption performance. However, this phenomenon has been effectively weakening by using column adsorption experiment, which accomplished the exchange between water and U(VI). These detailed investigation toward adsorption mechanism might open a doorway to gain deeper insights on the design and application of efficient adsorption materials for uranium extraction.

engineering, chemical,water resources
Adsorption of uranium (VI) by a MgAl-DHBDC/LDH composite: kinetic, mechanistic and thermodynamic studies

Shiyou Li,Yang Wang,Junqin He,Jishuai Qiao,Yubiao Yang,Zhiyu Xiong,Guohua Wang

DOI: https://doi.org/10.1007/s10967-023-09106-w

2023-08-24

Journal of Radioanalytical and Nuclear Chemistry

Abstract:A magnesium aluminum bimetallic organic framework derivative (MgAl-DHBDC/LDH composite) was prepared by etching MgAl bimetallic MOF template and used to remove U(VI) in aqueous solution. Compared to MgAl-DHBDC, the stability, dispersibility and removal ratio of U(VI) with MgAl-DHBDC/LDH were improved significantly over a wide pH range. The adsorption of uranium by MgAl-DHBDC/LDH was mainly multilayer physical adsorption, and the adsorption process was a spontaneous endothermic process. Moreover, the removal ratio of U(VI) by the MgAl-DHBDC/LDH composite remained above 90% after 4 cycles, indicating good regeneration performance. The MgAl-DHBDC/LDH composite shows great potential in the remediation of radionuclide uranium wastewater.

chemistry, inorganic & nuclear, analytical,nuclear science & technology
Adsorption of Uranyl Species on Hydroxylated Titanium Carbide Nanosheet: A First-Principles Study

Yu-Juan Zhang,Jian-Hui Lan,Lin Wang,Qun-Yan Wu,Cong-Zhi Wang,Tao Bo,Zhi-Fang Chai,Wei-Qun Shi

DOI: https://doi.org/10.1016/j.jhazmat.2016.01.053

IF: 13.6

2016-01-01

Journal of Hazardous Materials

Abstract:In this work, hydroxylated titanium carbide Ti3C2(OH)2, a representative of the two-dimensional transition metal carbides, has been predicted to be an effective adsorbent for uranyl ions in aqueous environments for the first time using density functional theory simulations. The calculations revealed that the uranyl ion can strongly bind with Ti3C2(OH)2 nanosheet in aqueous solution regardless of the presence of anionic ligands such as OH(-), Cl(-) and NO3(-). The bidentate coordination of uranyl to the surface is energetically more favorable than other adsorption configurations, and the uranyl ion prefers to bind with the deprotonated O adsorption site rather than the protonated one on the hydroxylated surface. During the adsorption process, the chemical adsorption as well as the formation of hydrogen bonds is the dominant factor.
Atomistic Computer Simulations of Uranyl Adsorption on Hydrated Illite and Smectite Surfaces

Anna D. Krot,Irina E. Vlasova,Evgeny V. Tararushkin,Andrey G. Kalinichev

DOI: https://doi.org/10.3390/min14010109

IF: 2.5

2024-01-20

Minerals

Abstract:A quantitative understanding of the molecular-scale mechanisms of radionuclide sorption on different clay minerals is crucial for the development and safe implementation of geological nuclear waste disposal technologies. We apply classical molecular dynamics (MD) computer simulations to study the adsorption of uranyl on the external basal surfaces of two typical clay models. In the illite model, negative charge is primarily localized in the tetrahedral sheets, while in the lower-charge smectite model, the isomorphic substitutions are introduced in the octahedral sheet. The comparison of atomic density distributions at the clay surfaces and adsorption-free energies profiles as a function of distance from these surfaces demonstrates that overall U behavior at the basal clay surface is quite similar for illite and smectite. Uranyl is sorbed as a mixture of outer-sphere aqua complexes [UO2(H2O)5]2+ and hydrolyzed aqua complexes [UO2(H2O)4–5OH]+ on both surfaces. The structural and compositional differences between the models do not greatly affect the uranyl's nearest coordination environment and are mainly reflected in the specific localization and orientation of the uranyl ions at both surfaces and in the magnitude of the adsorption-free energies. The observed quantitative characteristics of uranyl interactions with illite and smectite surfaces will help to better understand U behavior during the sorption process on clay minerals for the entire range of mixed-layer illite–smectite structures. A comparison of two versions of the ClayFF force field in the simulations made it possible to more accurately and quantitatively evaluate some subtle features of the uranyl–clay interactions and to obtain a more precise composition of uranyl complex with the modified ClayFF force field (ClayFF-MOH).

geochemistry & geophysics,mineralogy,mining & mineral processing

Mechanism of Adsorption Affinity and Capacity of Mg(Oh)(2) to Uranyl Revealed by Molecular Dynamics Simulation

Interfacial Engineering Improved the Selective Extraction of Uranyl from Saline Water by Nano-Mg(Oh)(2) and the Underlying Mechanism

Atom-scale understanding the adsorption mechanism of uranyl in the interlayer of montmorillonite: Insight from DFT + U calculation

Adsorption of uranyl on hydroxylated α-SiO₂(001): a first-principle study.

A Molecular Dynamics Study of Uranyl-Carbonate Complexes Adsorbed on Basal Surfaces of Clay Minerals

Adsorption of uranyl ion on peat

Surface defects enhance the adsorption affinity and selectivity of Mg(OH)2 towards As(v) and Cr(vi) oxyanions: a combined theoretical and experimental study

Behind adhesion of uranyl onto montmorillonite surface: a molecular dynamics study

Mechanistic Understanding of Uranyl Ion Complexation on Montmorillonite Edges: A Combined First-Principles Molecular Dynamics-Surface Complexation Modeling Approach

Adsorption of U(VI) on Montmorillonite in the Presence of Ethylenediaminetetraacetic Acid

Dynamic Behavior of Interfacial Water on Mg(OH)2 (001) Surface: A Molecular Dynamics Simulation Work

2D-layered Mg(OH)2 material adsorbing cellobiose via interfacial chemical coupling and its applications in handling toxic Cd2+ and UO22+ ions

Effective Adsorption of U(VI) from Aqueous Solution Using Magnetic Chitosan Nanoparticles Grafted with Maleic Anhydride: Equilibrium, Kinetic and Thermodynamic Studies

Characteristics of equilibrium and kinetic for U(VI) adsorption using novel diamine-functionalized hollow silica microspheres

Study on the interaction of uranyl with sulfated beta-cyclodextrin by affinity capillary electrophoresis and molecular dynamics simulation.

Functionalization of Mesoporous Fe3O4@SiO2 Nanospheres for Highly Efficient U(VI) Adsorption

Adsorption equilibrium and kinetics of uranium onto porous azo-metal–organic frameworks

Interaction mechanism of uranium(VI) with chitosan hydrogel: Insights from the perspective of adsorbent and adsorbate

Adsorption of uranium (VI) by a MgAl-DHBDC/LDH composite: kinetic, mechanistic and thermodynamic studies

Adsorption of Uranyl Species on Hydroxylated Titanium Carbide Nanosheet: A First-Principles Study

Atomistic Computer Simulations of Uranyl Adsorption on Hydrated Illite and Smectite Surfaces