Abstract:The key to fabricating conductive polymer/carbon nanotube (CNT) nanocomposites is controlling the distribution of CNTs in the polymer matrix. Here, an effective and simple approach for controlling the distribution of multiwalled CNTs (MWCNTs) is reported to largely improve the electrical conductivity of biodegradable poly(l-lactide) (PLLA) through crystalline morphology development by addition of high-melting-point PLLA (hPLLA) crystallites. hPLLA crystallites are efficient nucleating agents, increasing the crystallinity and crystallization rate of PLLA/MWCNT nanocomposites. Furthermore, the diameter of spherulites decreases from 9.7 to 1.0 μm with an increase in the concentration of hPLLA from 0.03 to 3.0 wt %. The electrical conductivity of PLLA/MWCNT nanocomposites with 0.3 wt % MWCNTs greatly increases from 1.89 × 10(-15) to 1.56 × 10(-8) S/cm with an increase in the matrix crystallinity from 2.4 to 46.8% on introducing trace amounts of hPLLA (0.07 wt %). The percolation threshold of PLLA/MWCNT nanocomposites is reduced from 0.51 to 0.21 wt % on addition of 0.07 wt % hPLLA. The high electrical conductivity and low percolation threshold of PLLA/MWCNT nanocomposites incorporated with hPLLA are related to the high crystallinity and crystalline morphologies of the PLLA matrix. Big spherulites lock a lot of MWCNTs at the intervals in the spherulites, which is harmful to the electrical conductivity. Small spherulites, with large surface areas, also need more MWCNTs to form conductive networks in the amorphous regions. Most MWCNTs that are bundled together to form conductive paths are found in samples with mid-sized spherulites of ∼6.7 μm. More interestingly, the high crystallinity and reconstructed MWCNT network also enhanced the Young modulus, elongation at break, and elastic modulus at high temperature of PLLA/MWCNT nanocomposites with small amounts of hPLLA.

Forming CNT-guided Stereocomplex Networks in Polylactide-Based Nanocomposites

Stereocomplex-Driven Morphological Transition of Coil-Rod-Coil Poly(lactic Acid)-Based Cylindrical Nanoparticles

Synthesis, Stereocomplex Crystallization and Properties of Poly(l‐lactide)/four‐armed Star Poly(d‐lactide) Functionalized Carbon Nanotubes Nanocomposites

Poly(l-lactide)/four-armed Star Poly(l-Lactide) Grafted Multiwalled Carbon Nanotubes Nanocomposites: Preparation, Rheology, Crystallization, and Mechanical Properties

Polylactide-based Nanocomposites with Stereocomplex Networks Enhanced by GO-g-PDLA

Carbon Nanotube Grafted Poly(L-Lactide)-Block-Poly(D-Lactide) and Its Stereocomplexation with Poly(Lactide)S: the Nucleation Effect of Carbon Nanotubes

Manipulating the Filler Network Structure and Properties of Polylactide/Carbon Black Nanocomposites with the Aid of Stereocomplex Crystallites

Constructing Stereocomplex Structures at the Interface for Remarkably Accelerating Matrix Crystallization and Enhancing the Mechanical Properties of Poly(l-Lactide)/multi-walled Carbon Nanotube Nanocomposites

Microwave-Assisted Direct Growth of Carbon Nanotubes at Graphene Oxide Nanosheets to Promote the Stereocomplexation and Performances of Polylactides

A Promising Strategy for Fabricating High-Performance Stereocomplex-Type Polylactide Products Via Carbon Nanotubes-Assisted Low-Temperature Sintering

Preferential formation of stereocomplex in high-molecular-weight polylactic acid racemic blend induced by carbon nanotubes

Rapid Stereocomplexation between Enantiomeric Comb-Shaped Cellulose-g-poly(l-lactide) Nanohybrids and Poly(d-lactide) from the Melt

Atomic Scale Investigation on the Structural and Mechanical Properties of Carbon Nanotubes Reinforced Polylactic Acid Composites

Design of High-Performance Poly(l-Lactide)/elastomer Blends Through Anchoring Carbon Nanotubes at the Interface with the Aid of Stereocomplex Crystallization

Stereocomplex formation in mixed polymers filled with two-dimensional nanofillers.

Nanostructures of Stereocomplex Polylactide in Poly[l-lactide] Doped with Poly[d-lactide]

Morphological Regulation Improved Electrical Conductivity And Electromagnetic Interference Shielding In Poly(L-Lactide)/Poly(Epsilon-Caprolactone)/Carbon Nanotube Nanocomposites Via Constructing Stereocomplex Crystallites

Role of Carbon Nanotube Grafted Poly(l-Lactide)-block-poly(d-lactide) in the Crystallization of Poly(l-Lactic Acid)/poly(d-Lactic Acid) Blends: Suppressed Homocrystallization and Enhanced Stereocomplex Crystallization

Rapid Stereocomplexation between Enantiomeric Comb-Shaped Cellulose-<i>g</i>-poly(<scp>l</scp>-lactide) Nanohybrids and Poly(<scp>d</scp>-lactide) from the Melt

Preparation and Properties of Cross-Linked Starch Nanocrystals/Polylactic Acid Nanocomposites

Control of the Crystalline Morphology of Poly(l-lactide) by Addition of High-Melting-Point Poly(l-lactide) and Its Effect on the Distribution of Multiwalled Carbon Nanotubes