Abstract:Functional Materials Letters, Ahead of Print. BaTiO3/Nb:SrTiO3 thin film oxides have been deposited on SrTiO3 substrates using a pulsed laser deposition system. Different annealing methods were thereafter used to assess the ferroelectricity of the grown films. The residual polarization value, 2Pr, of 4.205 [math]C/cm2 and saturated residual polarization value, 2Pmax, of 15.484 [math]C/cm2 were obtained using in-situ annealing. After performing rapid thermal annealing (RTA) annealing, the residual polarization value rose to 4.676 [math]C/cm2 and the saturated residual polarization value rose to 18.723 [math]C/cm2. Furthermore, a comparison of results showed that the saturation test frequency of the in-situ annealing was 10 times higher than the saturation test frequency of the RTA. This could be explained by the fact that the secondary high-temperature annealing led to a decrease in the conductivity of the doped oxide and, thereby, a decrease in the effective electric field that was applied to both ends of the BTO (BaTiO3) film. Thus, a lower frequency was required to ensure a flip of all ferroelectric domains within the BTO film. By testing the fatigue frequency at 100 kHz, 10[math] stable cycles in both annealing methods and the results confirmed the good stability of the device performance. A linear fit analysis of the [math]–[math] curves showed under in-situ annealing the presence of both a bulk-limited current mechanism that was dominated by the space charge limited current (SCLC) and Pool–Frenkel (PF) mechanisms, and an interface-limited current that was dominated by the Fowler–Nordheim (FN) mechanism in the structure. After RTA annealing, the conducting mechanism is ohmic contact at low electric field and the SCLC mechanism at high field strength. The results show that after RTA annealing, the quality and ferroelectric properties of the films are significantly improved compared to those under in-situ annealing. These results showed that the BTO/NSTO/STO (BaTiO3/Nb:SrTiO3/SrTiO3) structure had a standard test frequency as well as reliable stability. The BTO/NSTO/STO structure showed, therefore, promising applications in future nonvolatile information memory devices.

A First-Principles Study on the Mechanism of Screening Depolarizing Field in Two-Dimensional BaTiO3 Nanosheets

Phase Diagram of Ferroelectric Batio3 Ultrathin Films under Open-Circuit Conditions

A First-Principles Study on the Multiferroic Property of Two-Dimensional BaTiO3 (001) Ultrathin Film with Surface Ba Vacancy

Direct observation of room-temperature out-of-plane ferroelectricity and tunneling electroresistance at the two-dimensional limit

Structural Phase Transitions and Dielectric Properties of BaTiO3 from a Second-Principles Method

Direct Observation of Thickness Dependence of Ferroelectricity in Freestanding BaTiO3 Thin Film

How Ferroelectric BaTiO_3 Can Tune a Two-Dimensional Electron Gas at the Interface of LaInO3 and BaSnO_3: a First-Principles Study

Effects of Epitaxial Strain, Film Thickness and Electric-Field Frequency on the Ferroelectric Behavior of BaTiO3 Nano Films

Influence of depolarization field on temperature-misfit strain phase diagram of PbZr0.4Ti0.6O3 ultrathin films

Orientation and Electrode Configuration Dependence on Ferroelectric, Dielectric Properties of BaTiO3 Thin Films

First-principles Study Of180∘domain Walls Inbatio3: Mixed Bloch-Néel-Ising Character

The size and strain effects on the electric-field-induced domain evolution and hysteresis loop in ferroelectric BaTiO3 nanofilms

Ferroelectric properties and current mechanisms of BaTiO[math]/Nb:SrTiO[math] thin films

Phase Transition Effect on Ferroelectric Domain Surface Charge Dynamics in BaTiO 3 Single Crystal.

Thermal Stability of the Nanostructured Batio3 Determined by Long and Short Range Interactions: A Dual-Shell Model

Space-charge dominated epitaxial BaTiO 3 heterostructures

Effect of the depolarizing field on the domain structure of an improper ferroelectric

How a Ferroelectric Layer Can Tune a Two-Dimensional Electron Gas at the Interface of LaInO3 and BaSnO3: A First-Principles Study

Polarization dependent chemistry of ferroelectric BaTiO3 (001) domains

Dft Study on Ferroelectricity of Batio3

Ferroelectric state and polarization switching behaviour of ultrafine BaTiO3 nanoparticles with large-scale size uniformity