Abstract:Precise size control and general synthesis of ultrafine noble metal-based catalysts are very important in electrochemical energy conversion technologies. Herein, we develop the ultrafine MCu (M = Pt, Au, and Pd) alloy nanoparticles anchored on the porous N-doped carbon nanofibers (MCu/p-NCNFs) by the electroless deposition method. The as-prepared MCu alloy nanoparticles possess ultrafine particles sizes (<10 nm) and are uniformly anchored on p-NCNFs, which are derived from electrospun polyacrylonitrile (PAN) nanofibers. Owing to the desired composition and structure, the as-prepared PtCu/p-NCNFs with an ultrafine alloy size (≈3.5 nm) exhibits significantly enhanced electrocatalytic activity and stability toward methanol electrooxidation as well as the outstanding CO antipoisoning ability. This work offers a new general strategy for the fabrication of ultrafine alloy nanoparticles on a porous nitrogen-doped carbon support as highly efficient electrocatalysts for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jpcc.0c03460?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jpcc.0c03460</a>.Schematic illustration for the fabrication of MCu/p-NCNFs; SEM and TEM images with low magnification of as-prepared Cu/p-NCNFs; TEM image with high magnification of as-prepared Cu/p-NCNFs; SEM image with high magnification of as-prepared PtCu/p-NCNFs; CVs of the p-NCNFs in 0.5 M H2SO4 aqueous solution at 10 mV s–1; TEM image and size distribution of PtCu NPs; TEM images of PtCu/p-NCNFs synthesized using 3.5, 5, and 7 mM H2PtCl6 aqueous solution; XRD patterns of PtCu/p-NCNFs synthesized using different concentrations of H2PtCl6 aqueous solution and different time of electroless deposition; TEM images of PtCu/p-NCNFs synthesized by 5, 20, and 60 min electroless deposition; schematic illustration of metal nanoparticle deposition on carbon nanotubes via the substrate-enhanced electroless deposition process in previous studies; N2 adsorption–desorption isotherm and pore size distribution curve, survey XPS spectra, and C 1s XPS spectra of Cu/p-NCNFs and PtCu/p-NCNFs; CV curves in 0.5 M H2SO4 + 1 M CH3OH at 50 mV s–1; CV curves of PtCu/p-NCNFs and commercial Pt/C from the 1st to 200th cycle; TEM images of the PtCu/p-NCNFs and PtCu NPs after 200 cycles; histograms for size distribution of alloy nanoparticles in as-prepared PdCu/p-NCNFs and AuCu/p-NCNFs; EDS spectra of PdCu/p-NCNFs and AuCu/p-NCNFs; comparisons of the experimental parameters of as-reported research studies that use the SEED method to fabricate the MNPs/C system; and composition of different PtCu/p-NCNFs samples based on the ICP-AES analysis (<a class="ext-link" href="/doi/suppl/10.1021/acs.jpcc.0c03460/suppl_file/jp0c03460_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Mixed-Solvent Route to Unique PtAuCu Ternary Nanotubes Templated from Cu Nanowires As Efficient Dual Electrocatalysts

PtM (M = Co, Ni) Mesoporous Nanotubes As Bifunctional Electrocatalysts for Oxygen Reduction and Methanol Oxidation

Free-Standing Pt–Au Hollow Nanourchins with Enhanced Activity and Stability for Catalytic Methanol Oxidation

Facile Synthesis of PtCu3alloy Hexapods and Hollow Nanoframes As Highly Active Electrocatalysts for Methanol Oxidation

Nanophase-separated ternary PdAgCu nanotubes with rich interfaces for enhanced formic acid oxidation reaction

PdCu Alloy Nanodendrites with Tunable Composition As Highly Active Electrocatalysts for Methanol Oxidation

Facile Synthesis of Ternary PtPdCu Alloy Hexapods As Highly Efficient Electrocatalysts for Methanol Oxidation

Au-doped PtCu 2 nanonetworks with interface-rich for enhancing methanol electro-oxidation performance

Synthesis of quinary PtPdNiAuCu nanotubes with ultrahigh electrocatalytic activity for oxygen reduction reaction

Kinetically Controlled Synthesis of Pt-Cu Alloy Concave Nanocubes with High-Index Facets for Methanol Electro-Oxidation

Cu-template-dependent synthesis of PtCu nanotubes for oxygen reduction reactions

Facile synthesis of trimetallic PtAuCu alloy nanowires as High−Performance electrocatalysts for methanol oxidation reaction

Composition-driven Shape Evolution to Cu-rich PtCu Octahedral Alloy Nanocrystals As Superior Bifunctional Catalysts for Methanol Oxidation and Oxygen Reduction Reaction

Ultrathin Pt–Cu–Ni Ternary Alloy Nanowires with Multimetallic Interplay for Boosted Methanol Oxidation Activity

Mixed‐PtPd‐Shell PtPdCu Nanoparticle Nanotubes Templated from Copper Nanowires As Efficient and Highly Durable Electrocatalysts

Highly crystalline PtCu nanotubes with three dimensional molecular accessible and restructured surface for efficient catalysis

Bimetallic and Postsynthetically Alloyed PtCu Nanostructures with Tunable Reactivity for the Methanol Oxidation Reaction

The in Situ Etching Assisted Synthesis of Pt-Fe-Mn Ternary Alloys with High-Index Facets As Efficient Catalysts for Electro-Oxidation Reactions

Nanoporous PtRu Alloys for Electrocatalysis.

Influence of Pt∶Ru Ratio in Nanotubes Array Structures on the Electrocatalytic Activity of Methanol Oxidation

General Synthesis of Ultrafine Cu-Based Alloy Nanoparticles Anchored on Porous N-Doped Carbon Nanofibers for Enhanced Electrocatalytic Performance