Morphology-Dependent Photoelectrochemical Properties of Multi-Scale Layered Bi(C2o4)Oh

Juan Xu,Fei Teng,Wenqing Yao,Yongfa Zhu

DOI: https://doi.org/10.1039/c6ra00917d

IF: 4.036

2016-01-01

RSC Advances

Abstract:In this work, different morphologies have been synthesized, which can be controlled by simply tuning oxalate source, EG/W volumetric ratio, H2C2O4/Bi(NO3)3 molar ratio, hydrothermal temperature and duration.

What problem does this paper attempt to address?

Morphology regulation, structural, and photocatalytic properties of ZnO hierarchical microstructures synthesized by a simple hydrothermal method

Chunyu Wang,Yindi Gao,Lei Wang,Ping Li

DOI: https://doi.org/10.1002/pssa.201600876

2017-03-15

physica status solidi (a)

Abstract:Zinc Oxide (ZnO) hierarchical microstructures with diverse morphologies were prepared through a simple one‐step hydrothermal method with zinc chloride and sodium hydroxide as source materials, and citric acid as the modifying agent. The structure and morphology of the samples were studied through X‐ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller specific surface area determination. The morphology of the samples was easily regulated by changing the concentration of citric acid. Branchy structures, porous flowers, porous microspheres, solid flowers, solid flower spheres, and solid spheres of ZnO were obtained. The porous structures obtained with 150–200 mmol · L −1 citric acid showed excellent photocatalytic activities for the degradation of methylene blue under UV irradiation. A possible regulation mechanism of citric acid in ZnO crystals was proposed based on the experimental results.
Architecting Z-scheme Bi2S3@CoO with 3D Chrysanthemums-Like Architecture for Both Photoeletro-Oxidization and -Reduction Performance under Visible Light

Lijun Yang,Yandong Hu,Lei Zhang

DOI: https://doi.org/10.1016/j.cej.2019.122092

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:A large-area Z-scheme Bi2S3@CoO three dimensional(3D) hierarchical chrysanthemums-like array with a appropriate redoxpotential is synthesized via solvothermal self-assembly process. Many secondary Bi2S3 nanosheets are epitaxially grown on thready micropetals of flower-like CoO. By virtue of this special architecture, the composite used as photoanode shows highly improved photoeletro-oxidization activities towards single and binary mixed tetracycline (TC) and chlortetracycline (CTC), while as a photocathode the photoeletro-reduction activities of n-nitrophenyl (n-NP) and Cr(VI) are also increased. The enhanced photoelectrocatalytic activity of Bi2S3@CoO is ascribed to the hierarchical chrysanthemums-like structure and the synergistic effect between Bi2S3 and CoO. The unique structure endows Bi2S3@CoO with high specific surface area, multiple light reflection/scattering channels and improved molecular diffusion kinetics, providing more exposed active edges and greater light utilization efficiency. The introduction of Bi2S3 further optimizes the band structure of CoO with a narrower band gap, resulting in high removal capacity to pollutants as well as higher separation efficiency of photogenerated charges and holes. The present study provides a new photoelectrocatalytic material, which will have potential application in the fields of high-efficiency light-energy conversion.
Complex multilength-scale morphology in organic photovoltaics

Wenkai Zhong,Ming Zhang,Lei Zhu,Yongming Zhang,Feng Liu

DOI: https://doi.org/10.1016/j.trechm.2022.05.004

IF: 22.448

2022-08-01

Trends in Chemistry

Abstract:Control over the morphology in bulk heterojunction (BHJ) organic photovoltaics (OPVs) remains a key issue in improving the power conversion efficiency (PCE), despite the performance advances in recent years. This review summarizes the morphological features and guiding strategies of OPV blends spanning fullerene blends, non-fullerene blends, and all-polymer systems. The crystallization and liquid–liquid (L-L) demixing of materials, including donors and acceptors, are in competition to form the morphology across multiple length scales. Its character can be manipulated by controlling the kinetics and thermodynamics in film drying processes and post-treatments, affording appropriate phase separation and interfaces to promote charge generation and transport. The structure–property relationships constructed based on pivotal characterization techniques are discussed and future perspectives are provided.

chemistry, multidisciplinary
Bicontinuous oxide heteroepitaxy with enhanced photoconductivity

Pao-Wen Shao,Yi-Xian Wu,Wei-Han Chen,Mojue Zhang,Minyi Dai,Yen-Chien Kuo,Shang-Hsien Hsieh,Yi-Cheng Tang,Po-Liang Liu,Pu Yu,Yuang Chen,Rong Huang,Chia-Hao Chen,Ju-Hung Hsu,Yi-Chun Chen,Jia-Mian Hu,Ying-Hao Chu

DOI: https://doi.org/10.1038/s41467-022-35385-0

IF: 16.6

2023-01-04

Nature Communications

Abstract:Self-assembled systems have recently attracted extensive attention because they can display a wide range of phase morphologies in nanocomposites, providing a new arena to explore novel phenomena. Among these morphologies, a bicontinuous structure is highly desirable based on its high interface-to-volume ratio and 3D interconnectivity. A bicontinuous nickel oxide (NiO) and tin dioxide (SnO 2 ) heteroepitaxial nanocomposite is revealed here. By controlling their concentration, we fabricated tuneable self-assembled nanostructures from pillars to bicontinuous structures, as evidenced by TEM-energy-dispersive X-ray spectroscopy with a tortuous compositional distribution. The experimentally observed growth modes are consistent with predictions by first-principles calculations. Phase-field simulations are performed to understand 3D microstructure formation and extract key thermodynamic parameters for predicting microstructure morphologies in SnO 2 :NiO nanocomposites of other concentrations. Furthermore, we demonstrate significantly enhanced photovoltaic properties in a bicontinuous SnO 2 :NiO nanocomposite macroscopically and microscopically. This research shows a pathway to developing innovative solar cell and photodetector devices based on self-assembled oxides.

multidisciplinary sciences
Controllable synthesis of Bi2MoO6 and effect of morphology and variation in local structure on photocatalytic activities

Liwu Zhang,Tongguang Xu,Xu Zhao,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2010.05.022

2010-01-01

Abstract:Highly crystalline orthorhombic Bi2MoO6 particles with high visible-light photocatalytic activity have been controllably synthesized via a facile hydrothermal process without adding any surfactant. The morphologies of Bi2MoO6 with nanosheet and microrod can be selectively obtained by adjusting the pH value of the reactant. The formation mechanisms of nanosheet and microrod structures were then discussed based on the H+ cations adsorption abilities on different crystal faces. The Bi2MoO6 samples prepared at acidic condition showed 12 times higher photocatalytic activity than that prepared at basic condition under visible-light irradiation. The reason for the big difference in the photocatalytic activities for the Bi2MoO6 samples obtained at different pH values were systematically studied based on their shape, size and the variation of local structure.
Morphology-tunable Synthesis and Characterizations of Mg(OH)2 Films Via a Cathodic Electrochemical Process

Guanglong Zou,Weixiang Chen,Run Liu,Zhude Xu

DOI: https://doi.org/10.1016/j.matchemphys.2007.06.046

IF: 4.778

2007-01-01

Materials Chemistry and Physics

Abstract:An electrodeposition route for preparation of well-controlled magnesium hydroxide nanostructure using sodium acetate as structure-directing agent was presented. The magnesium hydroxide thin films were characterized by XRD, SEM and TEM. The influence of synthesis parameters on the morphological characteristics and size of magnesium hydroxide thin films deposited from nitrate bath was investigated, such as concentration of sodium acetate additive and applied potential. A possible mechanism responsible for morphologies evolution of thin films was also elucidated. This electrochemical process may be extended to fabricate other nano-/mesostructures with diverse morphologies and unique properties under convenient and mild conditions.
Core-Shell Structured Bi/BiOBr Photoelectrodes for Efficient Photoelectrochemical Water Splitting

Junfeng Han,Yunshan Gao,Yongkai Li,Zequn Chen,Xiangyu Liu,Xiaolu Xiong,Xu Zhang,Yujiu Jiang,Qiang Luo,Yuanjun Song,Zhiwei Wang,Xiang Li,Zhuo Chen,Wende Xiao

DOI: https://doi.org/10.1021/acs.jpcc.0c06522

2020-01-01

Abstract:Two-dimensional ternary compounds bismuth oxyhalides (BiOxBry) with suitable band gap and high surface bulk ratio have great potentials for photoelectrochemical water splitting. Although intensive efforts were devoted to the design of well-defined nanostructures to optimize the photoreactivity, it remains a great challenge to improve the light absorption capacity and charge carrier transfer of the materials. In this work, we developed a controllable synthesis route to prepare core-shell structured Bi/BiOBr complexes with abundant conduction channels and active edges as photoelectrodes. The structure and morphology of the Bi/BiOBr complexes could be modulated by tuning the thickness of Bi thin film and/or the oxygen gas flow during the annealing process. Photoelectrochemical analyses indicated that the photocurrent density of the Bi/BiOBr electrodes reached up to 0.36 mA cm(-2). at -0.4 V versus reversible hydrogen electrode (RHE) in acid environments, which was 1 order large than that based on pure BiOBr thin film electrodes (0.08 mA cm(-2)). Our study demonstrates that the controllable synthesis of Bi/BiOBr core-shell structures may open a new way for engineering 2D layered ternary compounds materials to develop novel catalyst devices.
Morphology‐Tunable Micro/Nanostructures: Characterization, Cathodoluminescence, and Field‐Emission Properties of Morphology‐Tunable CdS Micro/Nanostructures (adv. Funct. Mater. 15/2009)

Tianyou Zhai,Xiaosheng Fang,Yoshio Bando,Benjamin Dierre,Baodan Liu,Haibo Zeng,Xijin Xu,Yang Huang,Xiaoli Yuan,Takashi Sekiguchi,Dmitri Golberg

DOI: https://doi.org/10.1002/adfm.200990065

IF: 19

2009-01-01

Advanced Functional Materials

Abstract:On page 2423, T. Y. Zhai et al. report that high quality and uniform 1D CdS micro/nanostructures with different morphologies can be fabricated through a simple and effective thermal evaporation process. Both cathodoluminescence and field-emission measurements are made and clear correlations between morphology, structure, and optical and field emission performance are established.
Engineering the morphology of TiO2/carbon hybrids via oxidized Ti3C2Tx MXene and associated electrorheological activities

Wen Ling Zhang,Wei Wei,Wen Liu,Tong Guan,Yu Tian,Hongbo Zeng

DOI: https://doi.org/10.1016/j.cej.2019.122170

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Well defined morphology of titanium dioxide/carbon (TiO2/C) hybrids provides intriguing physical chemical properties, thus, they are attractive for broadly specific applications. However, the conventional wisdom of rational design of TiO2/C hybrids has not been satisfactorily investigated especially in nanostructure mainly due to the heterogeneous interface barriers between TiO2 and carbon. Herein, we present a completely novel yet generalized approach for the fabrication of TiO2/C hybrids with tunable bio-inspired shapes (e.g., grape-like, echeveria-like, albizia-like, bambootype, chestnut-like, etc.) based on a versatile solvothermal technique. To reduce interfacial barriers between TiO2 and carbon layers, the TiO2 nanoparticles are firstly decorated on the conductive carbon layers via an in-situ CO2 oxidation of Ti3C2Tx MXene (c-TiO2/C). The TiO2 arrays are heteroepitaxially grown on the c-TiO2/C substrate, which serves simultaneously as the TiO2 crystal seeds and carbon sources. A series of bio-inspired TiO2/C hybrids with desired constituent nano-units (including nanoplates, nanorods, nanoribbons, and nanowires) are facilely achieved via simply tuning the amounts and calcination temperatures of c-TiO2/C along with the hydrothermal time. More interestingly, the introduction of lithium ions can split the TiO2 arrays into small pieces, which is highly beneficial for the design of TiO2/C hybrids with preferred architectures. A detailed growth mechanism of the achieved TiO2/C hybrids is also proposed. Additionally, these TiO2/C hybrids provide valuable applications in many fields, such as sensing, catalysis and energy storage. Take the electro-responsive activity as an example, the achieved TiO2/C hybrids with tailored morphologies demonstrate tunable electro-rheological (ER) performances. The design principle is generally applicable to other metal (M) oxides/C systems, which will provide excellent opportunities for designing advanced material systems with widespread multifunctional applications.
Tailored BiPO4/Bi‐MOF heterostructure photocatalysts with diverse morphologies for highly efficient organic pollutant degradation

Zhiwei Liu,Liying Wang,Shanghai Dong,Lu Li,Jingjing Wang,Zhenzhu Cao,Yongfeng Zhang,Lin Cheng,Jucai Yang

DOI: https://doi.org/10.1002/aoc.7542

IF: 3.9

2024-05-25

Applied Organometallic Chemistry

Abstract:Generation of BiPO4/BiMOF complexes with three different morphologies. Three distinct morphologies of Bi‐MOFs were innovatively employed as carriers, facilitating the formation of heterojunctions with BiPO4. Among these, the optimal photocatalytic performance was demonstrated by the type II heterojunction BiPO4/CAU‐17. Bi3+ competitively coordinated to crucially aid CAU‐17's transformation into a heterojunction, enhancing interfacial contact in BiPO4/CAU‐17. These photocatalysts effectively degraded dyes (RhB, MO, MB) and tetracycline (TC) under light exposure. RhB degradation was 3.33 times faster with BiPO4/CAU‐17 than BiPO4, 1.45 times faster than FCAU‐17, 1.36 times faster than FRCAU‐17, and 1.32 times faster than CAU‐17. Analyzing carrier density, Fermi level, and band structure through VB‐XPS, UV–VIS, and Mott–Schottky provided insights into enhanced separation of photoexcited electron–hole pairs. This study presents a novel approach to tackle the aggregation challenge of the wide‐bandgap material BiPO4 by using suitable MOFs as carriers. It offers valuable perspectives for the design and application of photocatalysts in environmental remediation.

chemistry, inorganic & nuclear, applied
Universal Deposition Strategy of Nanoporous Complex Oxide Thin Films for Photoelectrochemical Applications

Hao Xiu,Tianshu Gao,Na An,Ying Wang,Yang Zhou,Xiaopeng Qi,Deyu Liu,Yongbo Kuang

DOI: https://doi.org/10.1021/acsaem.2c00470

IF: 6.4

2022-04-07

ACS Applied Energy Materials

Abstract:Developing facile approaches to prepare well-designed semiconductor nanostructures is an important goal for solar water splitting. Herein, a general solution method is reported that employs citrate to complex diverse metal cations and affords uniform nanoporous multiple oxide thin films with controllable porosity by spray pyrolysis. By using CuBi2O4 as a model material, a remarkable improvement in internal quantum efficiency and the impacts of the morphology on photoelectrochemical (PEC) performance is demonstrated. The morphology can be controlled by kinetically coordinating the relative rates between the gelation and the auto-combustion of citrate in the spraying process. Furthermore, the synthesis technique can be applied in a general fashion to the preparation of a wide variety of well-crystallized nanoporous oxide thin films with tunable morphologies for PEC and other heterogeneous catalysis applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00470.LSV curves, UV-Vis spectrum, top and cross-sectional views of CuBi2O4 thin films, and PEC-LSV tests and curves (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
One-pot Microemulsion-Mediated Synthesis of Bi-rich Bi4O5Br2 with Controllable Morphologies and Excellent Visible-Light Photocatalytic Removal of Pollutants

Danjun Mao,Shanshan Ding,Lingjun Meng,Yuxuan Dai,Cheng Sun,Shaogui Yang,Huan He

DOI: https://doi.org/10.1016/j.apcatb.2017.02.010

2017-01-01

Abstract:The novel Bi-rich Bi4O5Br2 with tunable morphologies of two-dimentional (2D) nanosheets (NSs), three-dimentional (3D) monodisperse layered microspheres (LMs) and hollow spheres (HSs) have been successfully synthesized via an ionic liquid-in-water (IL/W) microemulsion method. Surfactant TX-100 served as the stabilizer of the IL/W microemulsion, and its concentration significantly influenced the morphology and size of the resulting Bi4O5Br2 crystal. Possible formation mechanisms have also been discussed. IJV-vis diffuse-reflectance spectra and Density function theory (DFT) calculations indicated that Bi4O5Br2 possessed stronger visible light adsorption and more negative conduction band minimum (CBM), which is beneficial to effectively activate molecular oxygen to produce O-center dot(2)-. The photocatalytic activity of Bi-rich Bi4O5Br2 with varied shapes was investigated and compared with BiOBr for the removal of fungicide o-phenylphenol (OPP) and antibacterial agent norfioxacin (NOR) and tetracycline hydrochloride (TC) under visible light irradiation. The as-prepared Bi4O5Br2 HSs and LMs possess higher photocatalytic efficiency than Bi4O5Br2 and BiOBr NSs, which is attributed to the hollow/layered spherical structures and Bi-rich strategies. The (center dot)O2(-) and h(+) are identified to be the major photoactive species during the photo-degradation process by scavenger experiments and EPR methods. This study is expected to provide a stepping stone to purposively design and explore other novel hollow structures with controllable morphology and enhanced photocatalytic activity. (C) 2017 Elsevier B.V. All rights reserved.
Controllable Hydrothermal Synthesis and Photocatalytic Performance of Bi2MoO6 Nano/Microstructures

Tao Ji,Enna Ha,Mingzhou Wu,Xin Hu,Jie Wang,Yangang Sun,Shijie Li,Junqing Hu

DOI: https://doi.org/10.3390/catal10101161

IF: 3.9

2020-10-10

Catalysts

Abstract:Bi2MoO6 with a tunable morphology was synthesized by a facile hydrothermal route using different surfactants, including nanosheet-assembled microspheres, smooth microspheres, nanoparticle aggregates and nanoparticles. The morphology, crystal structure and photocatalytic activity of as-obtained Bi2MoO6 were characterized by scanning electron microscopes (SEM), X-ray diffraction (XRD), photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) and UV–Vis spectrophotometer. Bi2MoO6 flower-like microspheres using cetyl-trimethyl-ammonium bromide (BET) as the surfactant exhibited much better photocatalytic activity than Bi2MoO6 with the other morphologies, with a degradation efficiency of 98.4%. It can be summarized that the photocatalytic activity of Bi2MoO6 samples depends on their morphology and composition.

chemistry, physical
Morphology-Controlled Synthesis and Metalation of Porphyrin Nanoparticles with Enhanced Photocatalytic Performance

Jiefei Wang,Yong Zhong,Feng Bai

DOI: https://doi.org/10.1021/acs.nanolett.6b03135

IF: 10.8

2016-01-01

Nano Letters

Abstract:The design and engineering of the size, shape, and chemistry of photoactive building blocks enables the fabrication of functional nanoparticles for applications in light harvesting, photocatalytic synthesis, water splitting, phototherapy, and photodegradation. Here, we report the synthesis of such nanoparticles through a surfactant-assisted interfacial self-assembly process using optically active porphyrin as a functional building block. The self-assembly process relies on specific interactions such as p-p stacking and metalation (metal atoms and ligand coordination) between individual porphyrin building blocks. Depending on the kinetic conditions and type of surfactants, resulting structures exhibit well-defined one- to three-dimensional morphologies such as nanowires, nanooctahedra, and hierarchically ordered internal architectures. Specifically, electron microscopy and X-ray diffraction results indicate that these nanoparticles exhibit stable single-crystalline and nanoporous frameworks. Due to the hierarchical ordering of the porphyrins, the nanoparticles exhibit collective optical properties resulted from coupling of molecular porphyrins and photocatalytic activities such as photodegradation of methyl orange (MO) pollutants and hydrogen production.
Electronic structure modulation to enhance the internal electric field and artificial photosynthesis by Br introduction in layered Bi x O y Br z

Jingjing Liu,Ruonan Wang,Qin Zhong

DOI: https://doi.org/10.1039/d4ta03204g

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:Bi x O y Br z , as a new class of promising layered materials for photocatalysis, have been extensively applied in CO 2 reduction.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Morphology-controlled Fabrication of SnO2 /ZnO Nanocomposites with Enhanced Photocatalytic Performance

Yan Yu,Binghua Yao,Baoyue Cao,Wei Ma

DOI: https://doi.org/10.1111/php.13101

Abstract:In this work, a series of novel SnO2 /ZnO nanocomposites with different morphologies were fabricated via a facile hydrothermal technique followed by calcination in air. The morphological, structural and photocatalytic properties of the SnO2 /ZnO nanocomposites were studied using different methods. The results showed that the synthesized nanocomposites possessed crystal phases of wurtzite hexagonal phase ZnO and tetragonal rutile phase SnO2 . In addition, the morphologies of SnO2 /ZnO nanocomposites strongly depended on the molar ratios of Sn and Zn. Compared with ZnO and SnO2 , the SnO2 /ZnO nanocomposites exhibited considerably higher degradation efficiency for the photodegradation of methylene blue and quinolone antibiotics under mercury lamp irradiation. The SZ-2 nanospheres exhibited the highest degradation efficiency of 95.81%, which was about 2.63 times higher than that of ZnO nanoparticles. Moreover, the trapping experiments confirmed that ˙OH played the dominant role in MB degradation. Finally, the charge carriers potential transfer pathway and photocatalytic degradation mechanism were put forward. This study provides an economical way to prepare hybrid nanocomposites with controlled morphology for practical applications in the photocatalytic degradation of organic dyes and residual antibiotics.
Multi-layer Monoclinic BiVO4 with Oxygen Vacancies and V4+ Species for Highly Efficient Visible-Light Photoelectrochemical Applications

Jin-Meng Wu,Ying Chen,Lun Pan,Peihong Wang,Ya Cui,DeChao Kong,Li Wang,Xiangwen Zhang,Ji-Jun Zou

DOI: https://doi.org/10.1016/j.apcatb.2017.09.031

2018-01-01

Abstract:The utilization of solar energy into photoelectrochemical (PEC) water splitting is a popular approach to store the sustainable energy and minimize the dependence of fossil fuels. Herein, multi-layer BiVO4 films were synthesized by multi-cycle electrodeposition following by annealing at high temperature. Multi-layer BiVO4 films have monoclinic scheelite structure, and the morphology is changed from densely compact film to sponge-like network, and then bulk structure with the increase of electro-deposited layers. X-ray photoelectron spectra indicate the presence of abundant oxygen vacancies and V4+ species in multi-layer BiVO4, especially for 3-layer one. For visible-light PEC performance, 3-layer BiVO4 shows the highest photocurrent among the samples, i.e. up to 5.80 mA/cm(2) in sulfite oxidation and 1.79 mA/cm(2) in water splitting at 1.23 V versus a reverse hydrogen electrode (RHE) under 1 sun irradiation (100 mW/cm(2)), with very high IPCE achieved nearly 83% and 25% (at 420 nm), respectively. The extremely high PEC performance of 3-layer BiVO4 is attributed to its morphology of sponge-like network and the modulated band structure by the oxygen vacancies and V4+ species. Moreover, the multi-layer BiVO4 also shows very high photostability. This work provides a multi-layer-construction method for highly visible-light-active PEC anodes for practical applications.
Publisher Correction: Bicontinuous Oxide Heteroepitaxy with Enhanced Photoconductivity

Pao-Wen Shao,Yi-Xian Wu,Wei-Han Chen,Mojue Zhang,Minyi Dai,Yen-Chien Kuo,Shang-Hsien Hsieh,Yi-Cheng Tang,Po-Liang Liu,Pu Yu,Yuang Chen,Rong Huang,Chia-Hao Chen,Ju-Hung Hsu,Yi-Chun Chen,Jia-Mian Hu,Ying-Hao Chu

DOI: https://doi.org/10.1038/s41467-023-35885-7

IF: 16.6

2023-01-01

Nature Communications

Abstract:Self-assembled systems have recently attracted extensive attention because they can display a wide range of phase morphologies in nanocomposites, providing a new arena to explore novel phenomena. Among these morphologies, a bicontinuous structure is highly desirable based on its high interface-to-volume ratio and 3D interconnectivity. A bicontinuous nickel oxide (NiO) and tin dioxide (SnO2) heteroepitaxial nanocomposite is revealed here. By controlling their concentration, we fabricated tuneable self-assembled nanostructures from pillars to bicontinuous structures, as evidenced by TEM-energy-dispersive X-ray spectroscopy with a tortuous compositional distribution. The experimentally observed growth modes are consistent with predictions by first-principles calculations. Phase-field simulations are performed to understand 3D microstructure formation and extract key thermodynamic parameters for predicting microstructure morphologies in SnO2:NiO nanocomposites of other concentrations. Furthermore, we demonstrate significantly enhanced photovoltaic properties in a bicontinuous SnO2:NiO nanocomposite macroscopically and microscopically. This research shows a pathway to developing innovative solar cell and photodetector devices based on self-assembled oxides.
Facile synthesis and morphology-induced photoconductivity modulation of Bi2O2S nanostructures

Basant Chitara,Amit K. Shringi,Biswadev Roy,Marvin H. Wu,Fei Yan

DOI: https://doi.org/10.1016/j.matlet.2023.134545

IF: 3

2023-09-01

Materials Letters

Abstract:This study examines the photoconductivity of solution-synthesized Bi2O2S nanostructures, with or without hydrazine hydrate (HH). HH produces thinner nanostructures with faster carrier trapping times due to surface defects. Both samples show similar bulk trapping and recombination times, with longer rise times possibly indicating enhanced exciton binding energies from confinement to two dimensions. This approach promises to modulate photoconductivity in layered materials by adjusting reducing agent amounts during synthesis.

materials science, multidisciplinary,physics, applied
Simultaneous Morphology and Band Structure Manipulation of BiOBr by Te Doping for Enhanced Photocatalytic Oxygen Evolution

Jia Song,Yunfei Ma,Qitao Zhang,Chaohua Zhang,Xuelian Wu

DOI: https://doi.org/10.1021/acsami.3c13687

IF: 9.5

2023-12-15

ACS Applied Materials & Interfaces

Abstract:The photocatalytic oxygen evolution of bismuth oxybromide (BiOBr) is greatly hindered by its low visible-light response and high electron-hole recombination. Nonmetal doping can effectively alleviate these issues, leading to improvement in photocatalytic performance. Herein, Bi(2)Te(3) was introduced as both the Te doping source and the morphology-control template to improve the photocatalytic performance of BiOBr. Appropriate amounts of Te are critical to maintain the ultrathin plate-like...

materials science, multidisciplinary,nanoscience & nanotechnology

Morphology-Dependent Photoelectrochemical Properties of Multi-Scale Layered Bi(C2o4)Oh

Morphology regulation, structural, and photocatalytic properties of ZnO hierarchical microstructures synthesized by a simple hydrothermal method

Architecting Z-scheme Bi2S3@CoO with 3D Chrysanthemums-Like Architecture for Both Photoeletro-Oxidization and -Reduction Performance under Visible Light

Complex multilength-scale morphology in organic photovoltaics

Bicontinuous oxide heteroepitaxy with enhanced photoconductivity

Controllable synthesis of Bi2MoO6 and effect of morphology and variation in local structure on photocatalytic activities

Morphology-tunable Synthesis and Characterizations of Mg(OH)2 Films Via a Cathodic Electrochemical Process

Core-Shell Structured Bi/BiOBr Photoelectrodes for Efficient Photoelectrochemical Water Splitting

Morphology‐Tunable Micro/Nanostructures: Characterization, Cathodoluminescence, and Field‐Emission Properties of Morphology‐Tunable CdS Micro/Nanostructures (adv. Funct. Mater. 15/2009)

Engineering the morphology of TiO2/carbon hybrids via oxidized Ti3C2Tx MXene and associated electrorheological activities

Tailored BiPO4/Bi‐MOF heterostructure photocatalysts with diverse morphologies for highly efficient organic pollutant degradation

Universal Deposition Strategy of Nanoporous Complex Oxide Thin Films for Photoelectrochemical Applications

One-pot Microemulsion-Mediated Synthesis of Bi-rich Bi4O5Br2 with Controllable Morphologies and Excellent Visible-Light Photocatalytic Removal of Pollutants

Controllable Hydrothermal Synthesis and Photocatalytic Performance of Bi2MoO6 Nano/Microstructures

Morphology-Controlled Synthesis and Metalation of Porphyrin Nanoparticles with Enhanced Photocatalytic Performance

Electronic structure modulation to enhance the internal electric field and artificial photosynthesis by Br introduction in layered Bi x O y Br z

Morphology-controlled Fabrication of SnO2 /ZnO Nanocomposites with Enhanced Photocatalytic Performance

Multi-layer Monoclinic BiVO4 with Oxygen Vacancies and V4+ Species for Highly Efficient Visible-Light Photoelectrochemical Applications

Publisher Correction: Bicontinuous Oxide Heteroepitaxy with Enhanced Photoconductivity

Facile synthesis and morphology-induced photoconductivity modulation of Bi2O2S nanostructures

Simultaneous Morphology and Band Structure Manipulation of BiOBr by Te Doping for Enhanced Photocatalytic Oxygen Evolution