Abstract:Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while almost all existing hypersonic codes have low-order accuracy, which could lead to erroneous results in long-time integration and at high Reynolds numbers. Here, we focus on the transition from laminar to turbulent flow, where the Nusselt number may be five times or higher than the Nusselt number in the turbulent regime. The hypersonic flow regime must be modeled accurately using realistic chemistry to predict heat flux on the surface correctly. In this study, we simulate hypersonic boundary layer transition on a flat plate to compute the thermal and shear stresses on the wall. The domain is initialized with a laminar Blasius solution of compressible boundary layer equations. The transition to turbulence is induced using suction and blowing from a thin strip on the wall. Sponge regions are defined at the inflow and outflow boundaries to eliminate the solution contamination due to the reflections of the boundary conditions. In the spanwise direction, periodic boundary conditions are imposed. The numerical method applied here is a sixth-order compact finite difference in the interior of the domain coupled with a fourth-order Runge-Kutta time-stepping scheme for a structured Cartesian grid using staggered variables. The base finite difference code can perform simulations of non-equilibrium hypersonic flows. The numerical scheme is stabilized using the approximate deconvolution model (ADM) and artificial diffusion coefficients. We investigated the effect of non-equilibrium chemistry on the non-linear instability growth with hypersonic boundary layers. We also quantify thermal loads during the boundary layer laminar to turbulent transition for Mach number 10.

Direct Numerical Simulation Of Supersonic Turbulent Boundary Layer With Spanwise Wall Oscillation

Effects of Wall Transpiration on the Supersonic Boundary-Layer Oblique-Type Transition

Direct Numerical Simulations of First-Mode Oblique Breakdown in a Supersonic Boundary Layer under Wall Transpiration

Direct Numerical Simulation of Skin Friction Drag Reduction on Supersonic Turbulent Boundary Layers with Micro-Blowing

Direct numerical simulations of supersonic turbulent boundary layer with streamwise-striped wall blowing

Breaking the Reynolds Analogy: Decoupling Turbulent Heat and Momentum Transport via Spanwise Wall Oscillation in Wall-Bounded Flow

Direct Numerical Simulation for Laminarization of Turbulent Forced Gas Flows in Circular Tubes with Strong Heating

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Direct Numerical Simulation of Coherent Structure in Turbulent Open-Channel Flows with Heat Transfer

Effects of Localized Micro-blowing on a Spatially Developing Flat Turbulent Boundary Layer

Direct Numerical Simulation of Turbulent Boundary Layer with Heat Transfer

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

Direct Numerical Simulation of Turbulent Boundary Layer over Hemispherical Rough Walls

Numerical Simulation on the Shock Wave/Boundary Layer Interaction with Heating/Cooling Effect

Study On Reynolds Stress Transportation In A Turbulent Channel Flow With Spanwise Oscillating Wall

Direct Numerical Simulation of Supersonic Turbulent Flow over A Wavy Wall

Shock-induced heating and transition to turbulence in a hypersonic boundary layer

Hypersonic Boundary Layer Transition and Heat Loading

Effects of Wall Disturbances on the Statistics of Supersonic Turbulent Boundary Layers

Direct Numerical Simulation Database of High-Speed Flow over Parameterized Curved Walls

Changes in turbulent dissipation in a channel flow with oscillating walls