Abstract:A high-voltage LiCoO 2 cathode material has been increasingly studied due to its high capacity; however, the structural instability of this material results in poor cycling performance at high voltages, restricting its application. We use a controlled Mg doping strategy to modulate the crystal and electronic structure of the material and unravel the different effects of Mg occupation at Li and Co sites on the structure and electrochemical performance of LiCoO 2 . Mg substitution at Li sites provides much better electrochemical performance than Mg substitution at Co sites. Compared with bare LiCoO 2 , the substitution of Mg for Li and Co significantly enhances the capacity retention from 0.5% to 58.6% and 85.6% (500 cycles at 5C), respectively. Mg substitution at Li sites provides a “pillar’ to stabilize the layered structure and increases the interlayer spacing (I (LiO2) ) to reduce the energy barrier for Li + migration. The stress and strain on the crystal structure caused by the substantial expansion and contraction during cycling are alleviated, while the stability of oxygen in the Li 0.96 Mg 0.04 CoO 2 sample is enhanced; additionally, the destruction of the CoO 6 octahedron is also significantly inhibited, all of which confirm the increase in stabilization due to the Mg substitution in LiCoO 2 . This study offers some insights on the distinct effects of the same dopant at different crystal sites, which is instructive to develop a precisely controlled doping strategy.

Influence of Mg2+ Doping on the Structure and Electrochemical Performances of Layered Lini0.6co0.2-Xmn0.2mgxo2 Cathode Materials

Structural Evolution of Mg-Doped Single-Crystal LiCoO2 Cathodes: Importance of Morphology and Mg-Doping Sites

Modifying High-Voltage Olivine-Type LiMnPO4 Cathode Via Mg Substitution in High-Orientation Crystal

Elucidation of Synergistic Effect of Mg-co-doping on Electrochemical Performance of Mn-doped LiNiO2

Effect of Mg doping on the structural and electrochemical performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode materials

Structural and electrochemical properties of Mg-doped nickel based cathode materials LiNi0.6Co0.2Mn0.2−xMgxO2 for lithium ion batteries

Mg-doping and electrochemical properties of Li (Ni1/3Co1/3Mn1/3) O2cathode material

Mg-doped Li1.133Ni0.2Co0.2Mn0.467O2 in Li Site As High-Performance Cathode Material for Li-ion Batteries

Mg-doped Li1.2Mn0.54Ni0.13Co0.13O2 Nano Flakes with Improved Electrochemical Performance for Lithium-Ion Battery Application

Effects of Mg Doping at Different Positions in Li-Rich Mn-Based Cathode Material on Electrochemical Performance

Improving the electrochemical performances of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 through cooperative doping of Na+ and Mg2+

Influence of Cr and Mg co-doping on electrochemical performance of quaternary cathode materials for lithium-ion battery

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO<sub>2</sub>

Excellent Rate Capability of Mg Doped Li[Li0.2Ni0.13Co0.13Mn0.54]O2 Cathode Material for Lithium-Ion Battery

Understanding the electrochemical properties of Mg-doped Li2MnO3: first-principles calculations

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO 2

The Effects of Co Doping on the Crystal Structure and Electrochemical Performance of Mg(Mn2 − Xcox)o4 Negative Materials for Lithium Ion Battery

Doping Mg2+ to Improve the Li+ Diffusion Rate and Electrochemical Performance of Spinel LiMn2O4

Effect of Mg2+ Doping on Structure and Electrochemical Performance of Lithium Magnesium Silicate

Stabilizing the High-Voltage Cycle Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Mg Doping

Effect of Molybdenum Substitution on Electrochemical Performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Material