Abstract:Strong shear force developed in the lubrication film in the high-speed spindles will resulting high temperature rise and expanding the mandrel, which would arouse safe servicing problem. This study aimed to address the temperature rise issue in spindles through the use of substitutes in the spindle bearing material. To this end, we developed a spindle with a water-lubricated ceramic hydrodynamic and hydrostatic journal bearing. To support the selection of ceramic materials for the water-lubricated journal bearing, we initially performed application-oriented tests; to this end, the water absorption and porosity among alumina, silicon nitride, and silicon carbide were considered. To investigate the performance, and particularly the temperature characteristics of the hybrid bearing, a water-lubricated ceramic hydrodynamic and hydrostatic bearing test rig was designed to include temperature sensors. At the test rig, the radial clearance was measured for solving the temperature distribution of the bearing during the simulation. The experimental results helped verify that the water temperature increased by approximately 0.7°C as the rotation speed increased from 1200 rpm to 5400 rpm without an external radial load. The increase in temperature with and without radial load under a rotation speed of 3600 rpm was compared, and the results revealed a difference of 0.14°C. This indicates that the developed ceramic bearing improves the thermal stability of the spindle which shows its potential for industrial application in machine tools or other high rotation speed machines.

Experimental Study on the Dynamic Performance of a New High-Speed Spindle Supported by Water-Lubricated Hybrid Bearings

Design on Hybrid Ceramic Bearing Based on Water Based Fluid with Controllable Viscosity

A test rig to study the performance of water-lubricated high-speed hybrid bearings

Infleence of rotating speed and supply pressure on the performance of water-lubricated hybrid bearing

Performance of Water-Lubricated Ceramic Journal Hybrid Bearing

Investigation of the Combined Influence of Turbulence and Thermal Effects on the Performance of Water-Lubricated Hybrid Bearings with Circumferential Grooves and Stepped Recesses

Dynamic Coefficients Identification of Water-Lubricated Hybrid Bearings Used in High-Speed Spindles with Different Excitation Methods

Study on Rotor-Bearing Dynamic Performance of a Novel Motorized Spindle Supported by Water-Lubricated Hydrodynamic Spiral Grooved Bearings

Review of water lubricated bearing for high speed spindle

The Flow Field Simulation Of A Novel Water-Lubricated Hybrid Bearing For High-Speed Spindle

Study on the Static Performance and Stability of a Water-Lubricated Hybrid Bearing with Circumferential Grooves and Stepped Recesses Considering the Influence of Recess Sizes

Study on the friction characteristic of a water-lubricated hybrid bearing

Simulation on the Flow Fields of a Novel Water-lubricated Static and Dynamic Hybrid Bearing for High-speed Spindle

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Nonlinear dynamic behavior of a water-lubricated hybrid bearing-rotor system

Experimental Study On Dynamic Coefficients Of Water Lubricated High-Speed Hybrid Bearings With Stepped Recesses

Dynamic Characteristics of Hard Disk Drive Spindles Supported by Hydrodynamic Bearings

Design and Optimization of the Surface Texture at the Hydrostatic Bearing and the Spindle for High Precision Machining

Finite Element Analysis on Dynamic Characteristics of Hybrid Bearing Spindle System

An Integrated Approach to the Design and Analysis of an Ultra-High Speed Air-Bearing Spindle

Theoretical and Experimental Results of Water-Lubricated, High-Speed, Short-Capillary-Compensated Hybrid Journal Bearings