Abstract:Purpose This paper aims to demonstrate the effect of varying chromium content on the wear behavior of white cast iron, to study the interaction relationship between cementite and pearlite in white cast iron, while estimating their contribution rate in abrasive wear. Design/methodology/approach To study interaction of cementite-pearlite of white cast irons with different chromium content in three-body abrasive wear, three kinds of chromium white cast iron, bulk single-phase cementite, pure pearlite samples and the white cast iron (WCI), were prepared using the melting and casting technique. The so-called pure pearlite samples have the same chemical composition, microstructure and properties as the pearlite matrix in white cast iron. Findings Results indicated that the interaction has a negative value. Its absolute value decreased with increasing chromium addition. Meanwhile, a high load resulted in an increased interaction value. The contribution rate of cementite to interaction, which was higher than that of pearlite, increased with increasing chromium addition. This indicated cementite was a main phase. Besides, the reductive size of abrasive has a significant effect on the contribution rate at the high load. These prominent cementite occurred fracture, when small size abrasive indented the matrix. These result in the absence of a protective effect of cementite during wear process. Eventually, the contribution rate of cementite decreased significantly. Originality/value This paper demonstrates the effect of varying chromium content on wear behavior of white cast iron, to study the interaction relationship between cementite and pearlite in white cast iron while estimating their contribution rate in abrasive wear.

Two-Body Abrasion Resistance of Cementite Containing Different Chromium Concentrations

Three-Body Abrasive Wear Behavior of Cementite with Different Chromium Concentrations

Two-Body Abrasion Behaviors Characterization of White Cast Iron with Various Chromium Concentrations

Effect of Chromium-Induced (fe, Cr)3C Toughness Improvement on the Two-Body Abrasive Wear Behaviors of White Cast Iron

Three-Body Abrasive Behavior of Cementite–Iron Composite with Different Cementite Volume Fractions

Effects of Chromium Addition on Preparation and Properties of Bulk Cementite

Effect of Chromium Content on Cementite – Pearlite Interaction of White Cast Iron During Three-Body Abrasive Wear

Effect of Interaction Between Cementite and Pearlite on Two-Body Abrasive Wear Behaviors in White Cast Iron

Investigation on two-body abrasive wear behavior and mechanism of Fe–3.0 wt% B cast alloy with different chromium content

Effect of Chromium Content on Microstructure, Hardness, and Wear Resistance of As-Cast Fe-Cr-B Alloy

Investigations on the Mechanical Properties and Three-Body Wear Behavior of Pure Fe2B Intermetallic with Different Chromium Additions

Elastic Properties of Alloyed Cementite M3X (M = Fe, Cr; X = C, B) Phases from First-Principle Calculations and CALPHAD Model

Effect of Chromium on Microstructure and Wear Resistance of Fe-Cr-C Hardfacing Alloys

Effect of different chromium contents on microstructure and two-body abrasive wear behavior of Fe-Mn-B surfacing alloys

Effects of Chromium Addition on Microstructure and Abrasion Resistance of Fe–B Cast Alloy

Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe–3.0 wt% B cast alloy

Three-body Abrasive Wear Behaviors and Mechanism Analysis of Fe–B–C Cast Alloys with Various Mn Contents

Microstructure and Fracture Toughness of a WC-Fe Cemented Carbide Layer Produced by a Diffusion-Controlled Reaction

Investigates of Three-body Abrasive Wear Behavior of WC Particles Reinforced Chromium Family White Cast Irons Composites

Three-body abrasive wear behavior of CC/high-Cr WCI composite and its interfacial characteristics

Effect of Cr Addition on the Microstructure and Abrasive Wear Resistance of WC-reinforced Iron Matrix Surface Composites