Textured Silicon@Graphitic Carbon Nanowire Arrays for Advanced Lithium-Ion Batteries
Bin Wang,Xianglong Li,Linjie Zhi
DOI: https://doi.org/10.1149/ma2014-03/2/60
2014-01-01
ECS Meeting Abstracts
Abstract:Silicon (Si) has been recommended as one of the most promising candidate for next generation of anode in lithium-ion batteries mainly because of its highest ever known theoretical gravimetric capacity of 3579 mAh g at room temperature. However, the Si experiences a dramatic volume change during the reaction with lithium ions, finally resulting in the damage of the anode structure and fast capacity fading of the battery. The nanostructuring of Si has recently attracted great attention due to its capability to maintain the structural stability. Focusing on promoting the lithium storage properties in terms of gravimetric capacity, rate capability, and cycling stability, diverse exciting Si nanostructures and their hybrids have been designed and exploited. For instance, we have developed a novel Si-C nanohybrid in which Si nanowires dwell in the hollow graphitic tubes, which creates efficient channels for the fast transport of both electrons and lithium ions and provides spaces for the free expansion of Si nanowires during cycling. Impressively, this structural design resulted in remarkable electrochemical performance of 1100 mAh g at 4.2 A g over 1000 cycles. Despite of these improvements, one critical parameter correlating to the practical application of Si has long been neglected. In general, the low tap density of Si in the anodes directly lowers volumetric capacity reflecting volumetric energy density, and increases the use of other inactive additives like binders and carbon black capable of reducing the gravimetric capacity as well. As a result, it is urgently required to design new electrode structure, for example, by engineering both the individual materials unit and the materials ensemble, namely, a nanoscale system engineering strategy. In this report, we propose and develop a novel electrode configuration following this strategy. The wellordered perforated Si nanowires are conformally coated with the graphitic carbon sheets, and interconnected through an underlying layer, thus forming a mechanically robust, free-standing textured silicon@graphitic carbon nanowire array. Such a unique electrode structure has been designed simultaneously at the individual materials unit scale and the materials ensemble scale. Specifically, the perforated NW array were proposed to provide satisfactory void space for the free expansion of Si during lithiation, while the graphitic carbon coating addresses the interfacial instability issue, thus the structural stability can be readily realized. Furthermore, thanks to the nanowire array geometry with only ~10 wt % content of carbon introduced in the electrode, the tap density of Si reaches a significantly high value of ~0.9 g cm. Benefiting from such an integrated design protocol, the electrode exhibits high volumetric capacity, competing rate capability, and remarkably stable cycling performance (e.g. 1500 mAh cm after 200 cycles). Coupled with a simple and scalable production protocol, the electrode architecture developed represents a significant advance in developing Si-based electrodes practically applicable to next-generation lithium ion batteries.