Abstract:Uncertainty in structural loading during launch is a significant concern in the development of spacecraft and launch vehicles. Small variations in launch vehicle and payload mode shapes and their interaction can result in significant variation in system loads. In many cases involving large aerospace systems, it is difficult, not economical, or impossible to perform a system modal test. However, it is still vital to obtain test results that can be compared with analytical predictions to validate models. Instead, the “Building Block Approach” is used in which system components are tested individually. Component models are correlated and updated to agree as best they can with test results. The Space Launch System consists of a number of components that are assembled into a launch vehicle. Finite element models of the components are developed, reduced to Hurty/Craig-Bampton models, and assembled to represent different phases of flight. The only opportunity to obtain modal test data from an assembled Space Launch System will be during the Integrated Modal Test. There is always uncertainty in every model, which flows into uncertainty in predicted system results. Uncertainty quantification is used to determine statistical bounds on prediction accuracy based on model uncertainty. For the Space Launch System, model uncertainty is at the Hurty/Craig-Bampton component level. Uncertainty in the Hurty/Craig-Bampton components is quantified using the hybrid parametric variation approach, which combines parametric and nonparametric uncertainties. Uncertainty in model form is one of the biggest contributors to uncertainty in complex built-up structures. This type of uncertainty cannot be represented by variations in finite element model input parameters and thus cannot be included in a parametric approach. However, model-form uncertainty can be modeled using a nonparametric approach based on the random matrix theory. The hybrid parametric variation method requires the selection of dispersion values for the Hurty/Craig-Bampton fixed-interface eigenvalues and the Hurty/Craig-Bampton stiffness matrices. Component test/analysis frequency error is used to identify fixed-interface eigenvalue dispersions, while test/analysis cross-orthogonality is used to identify stiffness dispersion values. The hybrid parametric variation uncertainty quantification approach is applied to the Space Launch System Integrated Modal Test configuration. Monte Carlo analysis is performed, and statistics are determined for modal correlation metrics, frequency response from Integrated Modal Test shakers to selected accelerometers, as well as other metrics for determining how well target modes are excited and identified. If the predicted uncertainty envelopes future Integrated Modal Test results, then there will be increased confidence in the utility of the component-based hybrid parametric variation uncertainty quantification approach.

Sequential Multilayer Fusion Based Assessment Model for Spacecraft Launch Success Ratio

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

A novel framework for reliability assessment of payload fairing separation considering multi-source uncertainties and multiple failure modes

Data Fusion in Supportability Assessment of Aeronautic Electron Systems

A surrogate-based reliability analysis method of the motion of large flexible space structures

Combining Bayesian Active Learning and Conditional Gaussian Process Simulation for Propagating Mixed Uncertainties through Expensive Computer Simulators

A multi-fidelity surrogate modeling method in the presence of non-hierarchical low-fidelity data

Multi-sensor data fusion reconstruction method for vibration dynamic responses of aerospace structures

Layered SOTIF Analysis and 3σ-Criterion-Based Adaptive EKF for Lidar-Based Multi-Sensor Fusion Localization System on Foggy Days

Machine learning enabled fusion of CAE data and test data for vehicle crashworthiness performance evaluation by analysis

SLS Integrated Modal Test Uncertainty Quantification Using the Hybrid Parametric Variation Method

Parallel adaptive ensemble of metamodels combined with hypersphere sampling for rare failure events

CLVSim: A comprehensive framework for crewed lunar vehicle simulation—Modeling and applications

Compatible multi-model output fusion for complex systems modeling via set operation-based focus data identification

CAMERA: A Method for Cost-aware, Adaptive, Multifidelity, Efficient Reliability Analysis

A Risk Level Assessment Method for Traffic Scenarios Based on BEV Perception.

Fatigue Lifetime Assessment of Aircraft Engine Disc via Multi-source Information Fusion

Guidance Systematic Error Separation for Mobile Launch Vehicles Using Artificial Fish Swarm Algorithm

An Accelerated Simulation Approach for Multistate System Mission Reliability and Success Probability under Complex Mission

Reliability analysis and evaluation model for space phased‐mission system

Advances in Space Launch System Booster Separation Computational Fluid Dynamics