Abstract:Both fibril and spherical polyaniline (PANI) nanostructures have successfully served as nanofillers for obtaining epoxy resin polymer nanocomposites (PNCs). The effects of nanofiller morphology and loading level on the mechanical properties, rheological behaviors, thermal stability, flame retardancy, electrical conductivity, and dielectric properties were systematically studied. The introduction of the PANI nanofillers was found to reduce the heat-release rate and to increase the char residue of epoxy resin. A reduced viscosity was observed in both types of PANI-epoxy resin liquid nanosuspension samples at lower loadings (1.0 wt % for PANI nanospheres; 1.0 and 3.0 wt % for PANI nanofibers), the viscosity was increased with further increases in the PANI loading for both morphologies. The dynamic storage and loss modulii were studied, together with the glass-transition temperature (T(g)) being obtained from the peak of tan δ. The critical PANI nanofiller loading for the modulus and T(g) was different, i.e., 1.0 wt % for the nanofibers and 5.0 wt % for the nanospheres. The percolation thresholds of the PANI nanostructures were identified with the dynamic mechanical property and electrical conductivity, and, because of the higher aspect ratio, nanofibers reached the percolation threshold at a lower loading (3.0 wt %) than the PANI nanospheres (5.0 wt %). The PANI nanofillers could increase the electrical conductivity, and, at the same loading, the epoxy nanocomposites with the PANI nanofibers showed lower volume resistivity than the nanocomposites with the PANI nanospheres, which were discussed with the contact resistance and percolation threshold. The tensile test indicated an improved tensile strength of the epoxy matrix with the introduction of the PANI nanospheres at a lower loading (1.0 wt %). Compared with pure epoxy, the elasticity modulus was increased for all the PNC samples. Moreover, further studies on the fracture surface revealed an enhanced toughness. Finally, the real permittivity was observed to increase with increasing the PANI loading, and the enhanced permittivity was analyzed by the interfacial polarization.

Significantly enhanced mechanical and electrical properties of epoxy nanocomposites reinforced with low loading of polyaniline nanoparticles

Flame-retardant electrical conductive nanopolymers based on bisphenol F epoxy resin reinforced with nano polyanilines.

Enhanced electromagnetic wave absorption of engineered epoxy nanocomposites with the assistance of polyaniline fillers

Epoxy Resin Nanosuspensions and Reinforced Nanocomposites from Polyaniline Stabilized Multi-Walled Carbon Nanotubes

Preparation of conductive polyaniline/epoxy composite

Polyaniline Stabilized Magnetite Nanoparticle Reinforced Epoxy Nanocomposites

Carbon Nanostructure-Derived Polyaniline Metacomposites: Electrical, Dielectric, And Giant Magnetoresistive Properties

Polyaniline-decorated Carbon Fibers for Enhanced Mechanical and Electromagnetic Interference Shielding Performances of Epoxy Composites

3D Graphene Foams/epoxy Composites with Double-Sided Binder Polyaniline Interlayers for Maintaining Excellent Electrical Conductivities and Mechanical Properties

Transparent Anhydride–cured Epoxy Nanocomposites Reinforced with Polyaniline Stabilized Nanosilica

Effect of Polyaniline/Organophilic Montmorillonite Composites on Properties of Epoxy Coating

Electrical and magnetic properties of polyaniline/Fe3O4 nanostructures

Enhanced Electron-accepting Properties in Polyaniline, Tungsten, and Polymer Nanocomposites

Enhancements in Dielectric Constants of Polyaniline/ Polybenzobisoxazole Nanocomposites

Synergetic Effect of Polyaniline/Sodium Doped Nickel Oxide Composites on Structural, Thermal, Electrical, and Magnetic Properties

Enhancement of electroconductivity of polyaniline/graphene oxide nanocomposites through in situ emulsion polymerization

Preparation and anti‐corrosion performance of nano Polyaniline/Polyurethane interpenetrating network composite coating

Facile synthesis of polyaniline nanorods to simultaneously enhance the mechanical properties and wear resistance of epoxy composites

Polyaniline-Coated Short Nylon Fiber/Natural Rubber Conducting Composite

Enhancing the Electrochromic Performances of Polyaniline Film Through Incorporating Polyaniline Nanofibers Synthesized by Interfacial Polymerization Approach

Synthesis and Electrochemical Properties of Poly(2,3‐dimethylaniline)/polyaniline Composites