Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Rock Physics Modeling of Unconsolidated Sands: Accounting for Partial Friction Grain Contacts and Heterogeneous Stress Field

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Incremental behavior of granular soils: a strain response envelope perspective

Small-strain Shear Moduli Modeling of Sand: a Non-Equilibrium Thermodynamic Approach, Including an Application to Leighton Buzzard Sand

A Quasi-Static And Hysteretic Constitutive Model For Sand Based On Granular Solid Hydrodynamics: A Triaxial Compression Example

Elasto-plastic constitutive modeling for granular materials

Understanding the role of rock heterogeneity in controlling fault strength and stability

Stress Propagation and Arching in Static Sandpiles

Computational Modeling of Tool-Rock Frictional Contact With Anisotropic Damage

Mechanical responses of grain-based models considering different crystallographic spatial distributions to simulate heterogeneous rocks under loading

An Elasto-Plastic Constitutive Model for Soft Rock Considering Mobilization of Strength

Investigations on the compression-shear coupled stress waves propagating in heterogeneous rock

State-dependent induced dilatancy angle and hyperplasticity model for granular soils

A comprehensive numerical investigation of multi-scale particle shape effects on small strain stiffness of sands

A discrete element model for the development of compaction localization in granular rock

Frictional Contacts Between Rough Grains With Fractal Morphology

Experimental investigation and fractional elastoplastic damage constitutive modelling of gray sandstone under loading disturbance

A Density-Dependent Constitutive Model of Rockfill as Well as a Dynamic Contact Technique for Simulation of Dynamic Compaction with MPM

An experimental investigation and mechanical modeling of the combined action of confining stress and plastic strain in a rock mass