Microstructured Co2+-Doped Fiber Bragg Grating for Microfluidic Velocity Sensing

Ying Li,Guofeng Yan,Sailing He

DOI: https://doi.org/10.1364/acpc.2017.m2a.4

2017-01-01

Abstract:A microstructured Co 2+ -doped fiber Bragg grating (MCFBG) for microfluidic velocity sensing was proposed and demonstrated theoretically. By tracking the wavelength and relative position of the phase-shift point, the temperature influence can also be compensated.

What problem does this paper attempt to address?

Compact Microfiber Bragg Gratings with High-Index Contrast

Yanxin Liu,Chao Meng,A. Ping Zhang,Yao Xiao,Huakang Yu,Limin Tong

DOI: https://doi.org/10.1364/ol.36.003115

IF: 3.6

2011-01-01

Optics Letters

Abstract:We fabricate fiber Bragg grating (FBG) in microfibers (MFs) using focused ion beam milling technique. By periodically etching 100 nm-depth grooves on the surface of silica MFs with diameters less than 2 μm, evident grating features with transmission dip up to 15 dB are obtained. Because of the high-index contrast of the gratings structure, the length of the microfiber Bragg grating (MFBG) can be reduced to 500 μm level. Using a 518 μm-length 1.8 μm-diameter MFBG, we also demonstrate sensitivity up to 660 nm per refractive index unit (RIU) for refractive index (RI) sensing. The highly compact MFBGs demonstrated here may serve as low-dimensional building blocks for miniaturized photonic components and devices.
Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Guanghui Wang,Perry Ping Shum,Ho-pui Ho,Xia Yu,Dora Juan Juan Hu,Ying Cui,Limin Tong,Chinlon Lin

DOI: https://doi.org/10.1364/OE.19.008930

IF: 3.8

2011-01-01

Optics Express

Abstract:We report a novel micro-fiber Bragg grating (mu FBG) sensor that takes advantage of the degeneracy of stop-band and rapid emergence of spectral modes when an effective phase shift occurs. The phase shift can be enabled by a range of perturbations in a central segment of the grating, including monolayer immobilization of bio-molecules or change in refractive index in the surrounding, thereby constituting the possibility of a highly sensitive sensor with the merit of scalable performance. The use of mu FBG ensures strong evanescent field coupling to the surrounding in order to maximize signal transduction. Simulation results indicate very favorable sensor signal characteristics such as large wavelength shift and sharp reflection dips. A general relation between the peak position within the stop-band and the amount of effective phase shift is also provided, and may generally serve as helpful guideline for FBG sensor design. A typical mu FBG sensor device may detect surface protein/DNA adsorption with limit-of-detection (LOD) as low as 3.3 pg.mm(-2) for surface mass density and 51.8 fg for total mass. For refractive index (RI) sensing, the LOD is 2.5*10(-6) refractive index unit (RIU). (C) 2011 Optical Society of America
Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Xiuli Jiang,Qishuang Zhang,Qiang Ling,Yang Li,Jie Xu,Yusheng Zhang,Haiyun Chen,Zhengtian Gu,Zhangwei Yu,Zuguang Guan,Daru Chen

DOI: https://doi.org/10.1109/jsen.2024.3355162

IF: 4.3

2024-01-01

IEEE Sensors Journal

Abstract:An integrated all-fiber sensor based on ring-core fiber (RCF)-embedded long-period fiber grating (LPFG) cascaded RCF-Mach-Zehnder interferometer (MZI) for measuring curvature and temperature is proposed and demonstrated experimentally. The RCF-embedded LPFG section is fabricated by periodically embedding hundreds of micrometers sized RCF into SMF by employing the mature, low-cost cleaving splicing method (CSM). Due to the large core diameter mismatch, the energy within the core is exceeded into the cladding mode more effectively, and the periodic refractive index modulation gives our sensor has a compact size with only three-period SMF-RCF structures and a total length of 2.8 mm. To measure curvature and temperature simultaneously, an RCF-based MZI with an RCF length of 1 mm is cascaded behind LPFG by employing the CSM. Thus, there are two dips corresponding to LPFG and MZI occur in the transmission spectrum. The dips show different responses to curvature and temperature changes. The maximum curvature and temperature sensitivities of the two dips are 26.61, -1.67 nm/m(-1), 0.053 nm/.C, and 0.059 nm/degrees C, respectively. By utilizing a 2 x 2 matrix, simultaneous measurement of curvature and temperature can be achieved. The integrated all-fiber sensor has a compact size, low cost, and high sensitivity possessing more competitivity in complex, harsh applications.
Microfluidic Refractive-Index Sensors Based On Small-Hole Microstructured Optical Fiber Bragg Gratings

Aping Zhang,Guofeng Yan,Shaorui Gao,Sailing He,Bongkyun Kim,Jooeun Im,Youngjoo Chung

DOI: https://doi.org/10.1063/1.3597623

IF: 4

2011-01-01

Applied Physics Letters

Abstract:A microstructured optical fiber (MOF) Bragg grating is presented for microfluidic sensing applications. The MOF is specially designed to be with a large amount of microholes for developing ultrasensitive sensors based on inner coating and surface effects. With the fabrication of fiber Bragg grating (FBG), such an MOF sensor has been demonstrated for monitoring the fluid flowing through microholes. Experimental results reveal that the sensitivity of the sensor depends on both the refractive-index range of measurement and the order of fiber modes. The temperature dependency of the sensor has also been measured and compared with that of conventional FBGs. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3597623]
Compact Microfluidic Sensing by Introducing Effective Phase Shift in Fiber Bragg Grating

Minghui Tang,Guanghui Wang,Ho-pui Ho,Xuping Zhang

DOI: https://doi.org/10.1117/12.2072027

2014-01-01

Abstract:A compact microfluidic refractive index sensor fabricated by drilling hole in the middle section of a fiber Bragg grating (FBG) is reported herein. The laser-drilled hole provides a microfluidic channel for the aqueous sample to pass through while at the same time permits coupling of the interrogating light to detect the target analyte. The reported sensor takes advantage of the fact that a small phase shift in the central region of the grating will result in a very sharp peak in the FBG stop-band. The phase shift can be related to a range of possible perturbations inside the microfluidic channel, including passage of cells, beads and a shift in the concentration of certain fluidic component. The amount of wavelength shift of the peak in the FBG stop-band represents the change in the refractive index inside the microfluidic channel. Simulation results indicate very favorable sensor signal characteristics such as large wavelength shift and sharp reflection dips. The reported microfluidic phase shift FGB sensor could be a good candidate for portable flow cytometry applications.
Microchanneled Chirped Fiber Bragg Grating Formed by Femtosecond Laser-Aided Chemical Etching for Refractive Index and Temperature Measurements

Hongyan Fu,Kaiming Zhou,Pouneh Saffari,Chengbo Mou,Lin Zhang,Sailing He,Ian Bennion

DOI: https://doi.org/10.1109/lpt.2008.2002727

IF: 2.6

2008-01-01

IEEE Photonics Technology Letters

Abstract:In this work, a microchanneled chirped fiber Bragg grating (MCFBG) is proposed and fabricated through the femtosecond laser-assisted chemical etching. The microchannel ( $\sim$550 $\mu$ m) gives access to the external index liquid, thus inducing refractive index (RI) sensitivity to the structure. In the experiment, the transmission bands induced by the reduced effective index in the microchannel region were used to sense the surrounding RI and temperature changes. The experimental results show good agreement with the theoretical analysis. The proposed MCFBG offers enhanced RI sensitivity without degrading the robustness of the device showing good application potential as bio-chemical sensors.
Temperature-insensitive Nanobore Fiber Bragg Grating

Cong Xiong,Wei Jiang,Caoyuan Wang,Ruowei Yu,Jun He,Xuan Li,Kang Ying,Haiwen Cai,Aiqun Liu,Limin Xiao

DOI: https://doi.org/10.1109/ACP55869.2022.10088663

2022-01-01

Abstract:A fiber Bragg grating based on a novel nanobore fiber is proposed and fabricated by the femtosecond laser direct writing technique and the ultraviolet phase mask exposure technique respectively. The nanobore fiber Bragg grating is temperature-insensitive and has a nanochannel embedded in the fiber core, which can be used for nanofluidic applications.
A Microfiber Bragg Grating Based On A Microstructured Rod

Fei Xu,Gilberto Brambilla,Jing Feng,Yanqing Lu

DOI: https://doi.org/10.1109/LEOS.2009.5343220

2009-01-01

Abstract:Microfiber-based devices (MDs) have recently attracted much attention because of the enormous progress in the fabrication of low-loss sub-micrometric optical wires which allow for low-loss evanescent waveguiding. 3D microcoil resonators in Teflon and in low index liquid, a refractometric sensor based on a coated optical nanowire microcoil resonator has been investigated and demonstrated [1-3]. Although microcoil resonators have a wealth o af applications for future all-fiber micro-photonic circuits, more MDs (in particular gratings) are required. Similarly to gratings written in conventional fibers and waveguides, microfiber grating can have several different applications, including filters, sensors, and distributed feedback (DFB) lasers. The standard use of photosensitivity fiber core and UV writing is inconvenient for a microfiber because of the disappearance of the germanium core during the tapering process [4]. Here we propose to obtain a microfiber Bragg grating (MBG) by wrapping a microfiber on a microstructured rod. Combining current enabling technologies on microstructured optical fibers and microfibers[5], it is possible to induce periodical corrugations leading to the coupling between forward and backward propagating waves. This device is robust, compact and flexible. © 2009 IEEE.
Optofluidic Temperature and Pressure Measurements with Fiber Bragg Gratings Embedded in Microfluidic Devices

Gregory A. Cooksey,Zeeshan Ahmed

DOI: https://doi.org/10.48550/arXiv.1603.07743

2016-03-24

Optics

Abstract:The integration of photonic sensors into microfluidic devices provides opportunities for dynamic measurement of chemical and physical properties of fluids in very small volumes. We previously reported on the use of commercially available Fiber Bragg Gratings (FBGs) and on-chip silicon waveguides for temperature sensing. In this report, we demonstrate the integration of FBGs into easy-to-fabricate microfluidic devices and report on their sensitivity for temperature and pressure measurement in microliter volumes. These sensors present new routes to measurement in microfluidic applications such as small-volume calorimetry and microflow metrology.
Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

Minh Châu Phan Huy,Guillaume Laffont,Véronique Dewynter,Pierre Ferdinand,Dominique Pagnoux,Bernard Dussardier,Wilfried Blanc

DOI: https://doi.org/10.48550/arXiv.1003.0163

2010-02-28

Optics

Abstract:The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\degree C in a six-hole MOF, and the maximum sensitivity is reduced. Such passive FBG temperature compensation technique is of great interest for applications involving accurate sensing free of thermal effects.
Microfiber-Based Bragg Gratings for Sensing Applications: A Review

Jun-long Kou,M. D. Ding,Jing Feng,Yanqing Lu,Fei Xu,Gilberto Brambilla

DOI: https://doi.org/10.3390/s120708861

IF: 3.9

2012-01-01

Sensors

Abstract:Microfiber-based Bragg gratings (MFBGs) are an emerging concept in ultra-small optical fiber sensors. They have attracted great attention among researchers in the fiber sensing area because of their large evanescent field and compactness. In this review, the basic techniques for the fabrication of MFBGs are introduced first. Then, the sensing properties and applications of MFBGs are discussed, including measurement of refractive index (RI), temperature, and strain/force. Finally a summary of selected MFBG sensing elements from previous literature are tabulated.
Microfiber-based Bragg gratings for sensing applications: a review.

Jun-Long Kou,Ming Ding,Jing Feng,Yan-Qing Lu,Fei Xu,Gilberto Brambilla

DOI: https://doi.org/10.3390/s120708861

IF: 3.9

2012-01-01

Sensors

Abstract:Microfiber-based Bragg gratings (MFBGs) are an emerging concept in ultra-small optical fiber sensors. They have attracted great attention among researchers in the fiber sensing area because of their large evanescent field and compactness. In this review, the basic techniques for the fabrication of MFBGs are introduced first. Then, the sensing properties and applications of MFBGs are discussed, including measurement of refractive index (RI), temperature, and strain/force. Finally a summary of selected MFBG sensing elements from previous literature are tabulated.
Temperature compensated magnetic field sensor based on magnetic fluid infiltrated cascaded structure of micro-tapered long-period fiber grating and fiber Bragg grating

Zilong Guo,Yu Bai,Wei Zhang,Sitong Liu,Yongqiang Pan,Xiongxing Zhang,Junying Zhang,Haibin Chen,Xiaohui Li

DOI: https://doi.org/10.1016/j.sna.2023.114425

2023-08-01

Abstract:Magnetic fluid (MF) infiltrated fiber-optic interference structures can be used to realize miniature magnetic field sensor for various applications needing sensitive magnetic field measurement, however, these sensors are typically also sensitive to temperature variations. To solve the problem of temperature cross sensitivity, an MF-infiltrated micro-tapered long-period fiber grating (MT-LPFG) and a femtosecond laser inscribed fiber Bragg grating (fsFBG) cascaded sensing structure is proposed and demonstrated. The MT-LPFG is fabricated by a fused tapering method under the illumination of a CO2 laser and is inserted into a glass capillary infiltrated with MF for magnetic field measurement, and the fsFBG is cascaded to the MT-LPFG for temperature measurement. Through the simultaneous monitoring of the resonant wavelength shift of the MT-LPFG and the Bragg wavelength shift of the fsFBG, temperature and magnetic field strength can be simultaneously extracted through a sensitivity coefficient matrix. As a result, the influence of the temperature on the MF-infiltrated MT-LPFG can be effectively compensated. Experimental results show that a magnetic field strength sensitivity of 21.86 pm/Oe can be achieved in a magnetic field strength range of 10–80 Oe and a temperature range of 30–60 ℃.

engineering, electrical & electronic,instruments & instrumentation
Multi-Core Fiber Bragg Grating and Its Sensing Application

Xiaotong Zhang,Hongye Wang,Tingting Yuan,Libo Yuan

DOI: https://doi.org/10.3390/s24144532

IF: 3.9

2024-07-13

Sensors

Abstract:With the increase in the demand for large-capacity optical communication capacity, multi-core optical fiber (MCF) communication technology has developed, and both the types of MCFs and related devices have become increasingly mature. The application of MCFs in the field of sensing has also received more and more attention, among which MCF fiber Bragg grating (FBG) devices have received more and more attention and have been widely used in various fields. In this paper, the main writing methods of MCF FBGs and their sensing applications are reviewed. The future development of the MCF FBG is also prospected.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Fiber-Optic Viscometer with All-Fiber Acousto-Optic Superlattice Modulated Structure

Heng Qian,Li-Yang Shao,Wending Zhang,Xinpu Zhang,Haijun He,Bin Luo,Wei Pan,Xihua Zou,Lianshan Yan

DOI: https://doi.org/10.1109/jlt.2018.2859239

IF: 4.7

2018-01-01

Journal of Lightwave Technology

Abstract:We present a viscosity sensing method based on a fiber Bragg grating (FBG), which is longitudinally excited by an acoustic transducer. The reflection spectrum of the FBG is broadened by spatial modulation of the FBG caused by the applied acoustic wave. The reflection bandwidth of the acoustically modulated FBG decreases with increasing viscosity of the liquid surrounding the FBG. The sensing mechanism relies on the reduction in spatially periodic strain in the FBG caused by the viscosity of the surrounding fluid. Experimental results show that the bandwidth of the FBG changes from 0.41 to 0.27 nm as the viscosity increases from 1.0 to 5.5 mPa center dot s.
A Microfluidic Refractometric Sensor Based on Gratings in Optical Fibre Microwires

Fei Xu,Gilberto Brambilla,Yanqing Lu

DOI: https://doi.org/10.1364/oe.17.020866

IF: 3.8

2009-01-01

Optics Express

Abstract:In this paper we investigate a novel method to manufacture gratings in optical fiber microwires and discuss their application to sensing. Gratings can be manufactured by wrapping an optical fiber microwire on a microstructured rod. This method avoids post-processing the thin optical fiber microwire and it has great flexibility: chirping can be realized by designing the air hole size and position in the microstructured rod. By exploiting the large evanescent field in an inner channel, microfluidic refractometric sensors with sensitivity > 10(3) nm/RIU can be achieved.
Microchannelled chirped fibre Bragg grating based refractive index sensor formed by femto-second laser processing and hf-etching

Hongyan Fu,Kaiming Zhou,Pouneh Saffari,Chengbo Mou,Lin Zhang,Sailing He,Ian Bennion

DOI: https://doi.org/10.1109/ECOC.2008.4729339

2008-01-01

Abstract:The microchannelled chirped fibre Bragg grating (MCFBG) was fabricated using femtosecond laser processing and HF-etching. Intrinsical refractive-index sensitivity induced by the microchannel makes MCFBGs ideal for biochemical sensing.
Ultra-small Microfiber Bragg Grating Force Sensor with Greater Sensitivity

Wei Luo,Fei Xu,Yan-qing Lu

DOI: https://doi.org/10.1117/12.2012447

2012-01-01

Abstract:We experimentally demonstrate a compact microfiber Bragg grating (MFBG) force sensor that offers greater sensitivity under load. The FBG is fabricated by focused ion beam (FIB) milling a microfiber tapered from nonphotosensitive standard single-mode fiber. It is only ~58μm in length. The force sensitivity of the MFBG is as high as ~4133nm/N around the resonant wavelength of 1550nm, which is three orders of magnitude larger than that recorded in FBGs inscribed in untapered fibers.
In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Lingzhi Meng,Hongye Wang,Qi Xia,Tingting Yuan,Xiaotong Zhang,Libo Yuan

DOI: https://doi.org/10.1007/s13320-023-0683-z

IF: 2.814

2023-03-28

Photonic Sensors

Abstract:A vector bending fiber sensor based on core-by-core inscribed fiber Bragg gratings in a twin-core fiber has been proposed and experimentally demonstrated. An in-fiber integrated vector bending sensor is realized by using the thermal diffusion technique to fabricate the coupler. The characteristics of the coupler fabricated by thermal diffusion are simulated and experimented. By inscribing fiber Bragg gratings with different reflection wavelengths in the two cores of a symmetrical twin-core fiber, the curvature sensitivity can be enhanced by tracking the wavelength difference between the fiber Bragg gratings of the two cores. The measured bending sensitivity of the fiber Bragg grating ranges from −161.6 pm/m −1 to +165.5 pm/m −1 . The differential sensitivity of the two cores is twice that of a conventional single grating, and the temperature-induced crosstalk is also reduced. The bending sensor proposed in this paper has the advantages of high integration, enhancing the sensitivity and two-dimensional orientation recognizability, and reducing temperature crosstalk, which can be a promising candidate for structural health monitoring or wearable artificial electronics applications.

optics,instruments & instrumentation
The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Sixiang Liang,Zhan Wang,Pengfei Wang,Huanhuan Liu,Xiaohong Sun

DOI: https://doi.org/10.1134/s0020441224700647

2024-10-25

Instruments and Experimental Techniques

Abstract:This article uses polydimethylsiloxane (PDMS) to package an improved fiber Bragg grating (FBG) temperature sensor. Unlike the structure of PDMS completely enveloping fiber gratings, we utilize microfluidic processing technology to construct a microchannel with a diameter of 150 μm in the area of the fiber gratings. It eliminates the thermal stress on the fiber grating in the radial direction. Through the force analysis of the fiber gratings in the packaged sensor, it can be found that eliminating the radial thermal stress is conducive to improving the axial coefficient of thermal expansion of the fiber gratings. The temperature sensing characteristics of this structure are verified by simulation and experiment. Both theoretical and experimental results have shown that this structure can effectively improve the temperature sensitivity of the sensor. In the experiment, the temperature sensitivity of the packaged sensor is 3.5 times higher than that of the standard fiber gratings. The temperature sensitivity of the sensor is 37.6 pm/°C. It is simple to manufacture, does not pollute the environment, and can accurately monitor the temperature of the complex environment. Therefore, it is an ideal model for temperature monitoring in complex environments such as the ocean and mine.

engineering, multidisciplinary,instruments & instrumentation

Microstructured Co2+-Doped Fiber Bragg Grating for Microfluidic Velocity Sensing

Compact Microfiber Bragg Gratings with High-Index Contrast

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Microfluidic Refractive-Index Sensors Based On Small-Hole Microstructured Optical Fiber Bragg Gratings

Compact Microfluidic Sensing by Introducing Effective Phase Shift in Fiber Bragg Grating

Microchanneled Chirped Fiber Bragg Grating Formed by Femtosecond Laser-Aided Chemical Etching for Refractive Index and Temperature Measurements

Temperature-insensitive Nanobore Fiber Bragg Grating

A Microfiber Bragg Grating Based On A Microstructured Rod

Optofluidic Temperature and Pressure Measurements with Fiber Bragg Gratings Embedded in Microfluidic Devices

Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

Microfiber-Based Bragg Gratings for Sensing Applications: A Review

Microfiber-based Bragg gratings for sensing applications: a review.

Temperature compensated magnetic field sensor based on magnetic fluid infiltrated cascaded structure of micro-tapered long-period fiber grating and fiber Bragg grating

Multi-Core Fiber Bragg Grating and Its Sensing Application

Fiber-Optic Viscometer with All-Fiber Acousto-Optic Superlattice Modulated Structure

A Microfluidic Refractometric Sensor Based on Gratings in Optical Fibre Microwires

Microchannelled chirped fibre Bragg grating based refractive index sensor formed by femto-second laser processing and hf-etching

Ultra-small Microfiber Bragg Grating Force Sensor with Greater Sensitivity

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings