Abstract:The glassy polymer of polystyrene (PS) enjoys a good reputation as a promising optical material; however, the inherent brittleness hinders its further applications. Conventional toughening methods are realized based on the premise of a sacrifice in transparency and stiffness. In this work, we found an unprecedented strategy to address these obstacles by combining extensional stress-induced ductility and suppressing physical aging. PS-based film with a high stiffness, long-term ductility, and excellent transparency is achieved by introducing a styrene–butadiene block copolymer into the PS matrix and subsequently annealing stretched. A nanofibrillar structure of the polybutadiene (PB) phase is formulated surrounded by a PS matrix, and thus, the elongation at break enhances from 3.1% up to 86.8%, accompanying the yield strength enhanced from 25.5 to 62.2 MPa. More significantly, compared with neat PS, these films survive from physical aging and persistent ductility over time. The morphology deformation induced by stress makes an obvious contribution to the improvement of transparency. Investigating the dynamics of chain segments indicates that the incorporation of the copolymer can restrict rearrangement and local relaxation to the PS chain. This work could pave a potential route toward high-performance PS and might be transferable to other glassy polymers with a fragile character.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmacrolett.0c00733?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmacrolett.0c00733</a>.Materials, sample preparation, and protocol; the calculation procedure of the average length of PB nanofibrils (Lf) by SAXS profiles; 2D-SAXS pattern and Lf of the films; the TEM images of 30 wt %, 50 wt % blend, and neat KR01; the mechanical properties of the neat KR01 unstretched films; comparison of mechanical and optical properties between toughening methods from the recent reports and our work; the typical stress–strain curves of the neat PS and 15 wt % blend films after 1 and 106 days of storage at room temperature, respectively; the mechanical properties of neat PS films and 15 wt % blend films after 407 days of storage; detailed information on optical properties in neat KR01 films; the orientation factor (f) of samples with diverse KR01 content and draw ratios; the TMDSC profiles of samples with diverse draw ratios; the calculation procedure of mass fraction of mobile amorphous fraction (MAF) and the rigid amorphous fraction (RAF); the DMA curves of specimens with various draw ratios (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.0c00733/suppl_file/mz0c00733_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Accelerated Aging of PS Blocks in PS- B-Pmma Diblock Copolymer under Hard Confinement.

Physical aging of polystyrene blocks under three-dimensional soft confinement in PS-<i>b</i>-poly(n-butyl methacrylate) diblock copolymer: Two equilibrations on the way

Enthalpy Relaxation And Morphology Evolution In Polystyrene-B-Poly(Methyl Methacrylate) Diblock Copolymer

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Enthalpy Relaxation And Embrittlement Of Poly(L-Lactide) During Physical Aging

Poly(L-Lactic Acid)-Block-Poly(Butylene Succinate-Co-Butylene Adipate) Multiblock Copolymers: from Synthesis to Thermo-Mechanical Properties

Roles Of Physical Aging On Crystallization Kinetics And Induction Period Of Poly(L-Lactide)

Features of Structural Relaxation in Diblock Copolymers

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Physical Aging of Polystyrene Confined in Anodic Aluminum Oxide Nanopores

Tunability and molecular weight dependence of the physical aging behavior of polystyrene and poly(methyl methacrylate) films

Durably Ductile, Transparent Polystyrene Based on Extensional Stress-Induced Rejuvenation Stabilized by Styrene–Butadiene Block Copolymer Nanofibrils

Adsorption-desorption Effect on Physical Aging in PMMA-silica Nanocomposites

Synthesis of (Hard-Soft-hard)x Multiblock Copolymers Via RAFT Emulsion Polymerization and Mechanical Enhancement Via Block Architectures

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Suppressed Physical Aging in PMMA-titanium Oxide Nanocomposites by Controlling Alignment of Nanoparticles

Storage Life of Particle-Filled Polymer Composites Considering Aging Effects

Structural relaxation of polymer nanospheres under soft and hard confinement: isobaric versus isochoric conditions.

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Influence of Local Phase Separation on Dielectric Properties of PVDF/PMMA Blends During Thermal Aging

Segmental dynamics and physical aging of polystyrene/silver nanocomposites