Abstract:Abstract Sediments in the seabed hold vital clues to the study of marine geology, microbial communities and history of ocean life, and the remote operated vehicle (ROV) mounted tubular sampling is an important way to obtain sediments. However, sampling in the seabed is a particularly difficult and complicated task due to the difficulty accessing deep water layers. The sampling is affected by the sampler’s structural parameters, operation parameters and the interaction between the sampling tube and sediments, which usually results in low volume and coring rate of sediments obtained. This paper simulated the soft viscous seabed sediments as non-Newtonian Herschel-Bulkley viscoplastic fluids and established a numerical model for the tubular sampling based on the volume of fluid (VOF) method. The influence rules of the sampling tube diameter, drainage area rate, penetration velocity, and sediments dynamic viscosity on coring rate and volume were studied. The results showed that coring volume was negatively correlated with all the parameters except the sampling tube diameter. Furthermore, coring rate decreased with increases in penetration velocity, drainage area rate, and sediments dynamic viscosity. The coring rate first increased and then decreased with increasing of the sampling tube diameter, and the peak value was also influenced by penetration velocity. Then, based on the numerical simulation results, an experimental sampling platform was set up and real-world sampling experiments were conducted. The simulation results tallied with the experimental results, with a maximum absolute error of only 4.6%, which verified that the numerical simulation model accurately reflected real-world sampling. The findings in this paper can provide a theoretical basis for facilitating the optimal design of the geometric structure of the seabed sediments samplers and the parameters in the sampling process.

Vertical Measurement Method of Seafloor Sediments in the Sound Tube under the Condition of the Structure State

Measuring the sound speed in deep-sea first sediment layer using a high-frequency submersible sub-bottom profiler: Method and sea trial application

Monitoring the vertical changes of a tidal flat using a MEMS accelerometer array

Short-range Velocity Field Observation by Coastal Acoustic Tomography

Flow Velocity and Temperature Measuring in Large-Scale Wave-Current Flume by Coastal Acoustic Tomography

Calibration measurement and application of a dual-probe acoustic measurement method for seafloor sediments

Analysis of Displacement Performance for a Horizontal Flowthrough Sequence Water Sampler

Method to submarine pipe status inspection in strong tide region: submarine pipe status inspection in Hangzhou Bay

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Time difference auto‐extraction methods for in situ sound speed measurements in seafloor sediments

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

On-deck vs. laboratory analyses of the sound velocity of sediments from the Huanghai and Bohai seas

Analysis on acoustic velocity characteristics of sediments in the northern slope of the South China Sea

Seafloor Sediment Acoustic Properties on the Continental Slope in the Northwestern South China Sea

Sediment concentration measurement by transverse suction

Relating Geotechnical Sediment Properties and Low Frequency CHIRP Sonar Measurements

Physical properties and in situ geoacoustic properties of seafloor surface sediments in the East China Sea

A Method of Turbulence Measurements from a Moored Reciprocating Vertical Profiler Based on Buoyancy-Driven

Spatial variation of sediment geoacoustic properties at the Seabed Characterization Experiment site

Simulated and Experimental Study of Seabed Sediments Sampling Parameters Based on the VOF Method

Influences of Medium Structure of Three-Phase Seabed Deposit on Sound Velocity