Abstract:An infrared laser‐assisted direct ink writing process is developed to fabricate high‐fidelity polydimethylsiloxane (PDMS) structures with commercial thermally cured DOWSIL‐SE1700. The accelerated cross‐linking reaction arising from the irradiation energy of the laser significantly improves the collapse of large‐span architecture. The in situ preheating process also facilitates the fabrication of complex structures with thin wall features, exhibiting promising 3D printing capability. Polydimethylsiloxane (PDMS) is extensively applied in the 3D printing field due to its excellent biocompatibility, flexibility, and gas permeability. However, as a thermal curing material, its low strength before curing inevitably causes structural deformation during the printing process and deteriorates the shape accuracy. In this paper, an innovative method, the infrared laser‐assisted direct ink writing (DIW) process, is developed to realize the in situ preheating and curing of silicone materials to improve the strength of PDMS filaments during processing. Therefore, the large‐span spatial structure with high‐fidelity morphology can be produced. First, the feasibility is validated that temperature ascension of the voxels arising from the irradiation energy of the infrared laser can accelerate the cross‐linking reaction and realize the precuring of PDMS; then, the relationship between the parameters of laser irradiation and the processing performance of 3D printing is systematically investigated to find the optimization. Finally, experiments are conducted, including the single silicone filament, silicone foams, and complex 3D features. Their excellent structural preservation proves the proposed method is practical to fabricate the high‐fidelity fabrication of complex structures such as large spans and thin wall features, which will help to broaden the 3D printing capabilities of silicone in the development of flexible electronics and soft robots.

Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures (Adv. Mater. Technol. 19/2024)

Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures

3D freeform printing of silk fibroin

Cost-Effective 3D Printing of Silicone Structures Using an Advanced Intra-Layer Curing Approach

Multi-Material 3D Printing of Highly Stretchable Silicone Elastomer.

3D Printing by Multiphase Silicone/Water Capillary Inks

Unstructured Direct Ink Write 3D Printing of Functional Structures with Ambient Temperature Curing Dual‐Network Thermoset Ink

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures

Instant Gelation System As Self-Healable and Printable 3D Cell Culture Bioink Based on Dynamic Covalent Chemistry.

Freeform laser and inkjet printing of biological constructs

3D Printing of Complex GelMA-based Scaffolds with Nanoclay

3D Inkjet Printing of Biomaterials with Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks

Freeform Inkjet Printing of Cellular Structures with Bifurcations.

A silicone-based support material eliminates interfacial instabilities in 3D silicone printing

Micro-extrusion 3D printing of articular cartilage substitutes with a multizonal structure using hydrophilic and rapidly curing silicone-based ink materials

Phase‐Change‐Enabled, Rapid, High‐Resolution Direct Ink Writing of Soft Silicone

High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing

A Versatile Photocrosslinkable Silicone Composite for 3D Printing Applications

Advective Assembler‐Enhanced Support Bath Rotational Direct Ink Writing

Rapid High-Resolution Visible Light 3D Printing