Abstract:Multi-actuated rigid-flexible dynamic system exists widely in precision machinery and electrical control fields. The performances, such as kinematic, dynamic, electrical, magnetic, and thermal performances, are correlated and difficult to trap precisely. Therefore, a multi-actuated mechanism design method considering structure flexibility using correlated performance reinforcing is put forward. A system containing flexible subparts with multi degrees of freedom (DOF) with physical coordinate is converted into modal coordinate using ‘DOF×modal order’ square matrix. The structure flexibility is described by modal superposition of the shape mode which is considered as additional generalized coordinates. A dynamic equation with large DOF is formulated and reduced based on Craig-Bampton modal truncation. Using analogical design methodology with and without structure flexibility of the low voltage circuit breaker (LVCB), the extent of the performance impact of each subpart is obtained by calculating correlated Holm force, Lorentz force, electrodynamic repulsion force, electromagnetic force, and cantilevered bimetallic strip force. Design of experiments method is employed to reveal the hard-measuring properties using correlated relatively easy-measuring parameters. The trip mechanism is validated by an electrical performance experiment. results show that the structure flexibility can decrease the tripping velocity, which is non-negligible, especially for high frequency tripping. The method provides a reference significance for similar multi-actuated mechanism design.

Design and Analysis of a Large-Range Flexure-based Parallel Mechanism Based on Matrix Method.

Analysis on the Displacement Performances of Parallel Four-Bar Flexure Hinge Mechanism

Design and DOF Analysis of a Novel Compliant Parallel Mechanism for Large Load

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Systematic Design Method And Experimental Validation Of A 2-Dof Compliant Parallel Mechanism With Excellent Input And Output Decoupling Performances

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Kinematic analysis of a flexible six-DOF parallel mechanism

Optimal Design of a Novel 4-Degree-of-freedom Parallel Mechanism with Flexible Orientation Capability

A novel compliance modeling method for compliant parallel mechanisms and its application

Compliance Calculation Method for Planar Flexure-Based Mechanisms

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Design and implementation of a 2-DOF 5R parallel mechanism with a coaxial-driven layout

Mobility Characteristics of a Flexure-based Compliant Manipulator with Three Legs

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Compliance modeling of planar flexure-based mechanisms and its application to micro-motion stages

A 5-DOF redundantly actuated parallel mechanism for large tilting five-face machining

Analysis and Application of a 2-DOF Planar Parallel Mechanism

Dynamic Modeling and Experimental Verification of an RPR Type Compliant Parallel Mechanism with Low Orders

Design and optimization of a planar anti-buckling compliant rotational joint with a remote center of motion