Abstract:Abstract Cable-driven parallel robots (CDPRs) have the characteristics of reconfigurability, which endows CDPRs with flexible workspace, freely configurable degrees of freedom and various configurations, greatly expanding their range of applications. Modular design provides great convenience and feasibility for the realization of reconfiguration, which is a key issue of reconfiguration research. However, most existing CDPRs have problems of low modularity and low system integration, which brings inconvenience to the realization of reconfiguration. In this paper, a highly integrated and high precision cable-driving module is designed, which can accurately control the length and tension of the cable. In addition, experimental verification is performed. The single-module experiment shows that the module has good ability for cable length and cable tension control. The cable length control error is less than 0.2mm, and the cable tension control error is less than 0.8N. Furthermore, based on the proposed module, a CDPR with 8 cables and 6 degrees of freedom is constructed rapidly. The open-loop tracking error of the robot is measured by laser tracker. Results show that the tracking error is less than 4.5mm and the Root-Mean-Square-Error (RMSE) is 2.1mm. Besides, the compliance control experiment of the robot shows that the tracking error in impedance control mode is less than 2mm, and the RMSE is 0.95mm, and the drag force in teaching mode is less than 2.5N, which demonstrates good follow-up performance. The proposed compact cable-driving module with high precision could be useful for the design and rapid construction of reconfigurable CDPRs.

Design and Kinematic Analysis of a Modular Re-Configurable Cable-Driven Parallel Robot

A novel design method for a reconfigurable two-drive cable-driven parallel robot

Design And Analysis Of An Under-Constrained Reconfigurable Cable-Driven Parallel Robot

Design and Experiment of a Compact Cable-Driving Module for Reconfigurable Cable-Driven Parallel Robots

Reconfiguration and Performance Evaluation of TBot Cable-Driven Parallel Robot

Design Control and Performance of a Cable-Driving Module with External Encoder and Force Sensor for Cable-Driven Parallel Robots

A Cable-Driven Parallel Robot With Full-Circle End-Effector Rotations

State-of-the-art on Theories and Applications of Cable-Driven Parallel Robots

A Review on Cable-driven Parallel Robots

Design Analysis of a Cable-Driven Parallel Robot with Parallel Cables for Ship Side Painting

Design and Experiments of a Redundantly Actuated Cable-Driven Parallel Robot.

Design and Optimization of Three-Degree-of-freedom Planar Adaptive Cable-Driven Parallel Robots Using the Cable Wrapping Phenomenon

Design of Spatial Adaptive Cable-Driven Parallel Robots with an Unlimited Rotation Axis Using the Cable Wrapping Phenomenon

Modeling and Cooperation Method for Movable Anchor Winch Cable-Driven Parallel Robot

A Novel Cable-Driven Parallel Robot with Movable Anchor Points Capable for Obstacle Environments

Design and Control of a Novel Cable Driven Parallel Mechanism

Dynamic Characteristics Analysis of Integrated Cable-Driven Parallel Robots

Optimal Reconfiguration Planning of a 3-DOF Point-Mass Cable-Driven Parallel Robot

Conceptual Design and Error Analysis of a Cable-Driven Parallel Robot

Modeling and Control of a Cable-Driven Parallel Robot Allowing Cable-edge Collisions