Abstract:Lower-limb exoskeletons can aid restoring mobility in people with movement disorders. Cable-driven exoskeletons can offload their actuators away from the human body to reduce the weight imposed on the user and enable precise control of joints. However, ensuring limb coordination through bidirectional motion control of joints using cables raise the technical challenge of preventing the occurrence of undesired cable slackness or counteracting forces between cables. Thus, motivation exists to develop a control design framework that integrates both a joint control loop to ensure suitable limb tracking and a cable control loop to maintain cable tension properly. In this article, a two-layer control structure consisting of high and low-level controllers are developed to ensure a knee-joint exoskeleton system follows the desired joint trajectories and adjusts the cable tension, respectively. A repetitive learning controller is designed for the high-level knee joint tracking objective motivated by the periodic nature of the desired leg swings (i.e., to achieve knee flexion and extension). Low-level robust controllers are developed for a pair of cables, each actuated by an electric motor, to track target motor trajectories composed of motor kinematics and offset angles to mitigate cable slackness. The offset angles are computed using admittance models that exploit measurements of the cable tensions as inputs. Each electric motor switches its role between tracking the knee joint trajectory (i.e., the motor acts as the leader motor to achieve flexion or extension) and implementing the low-level controller (i.e., the motor acts as the follower motor to reduce slackness). Hence, at any time, one motor is the leader and the other is the follower. A Lyapunov-based stability analysis is developed for the high-level joint controller to ensure global asymptotic tracking and the low-level follower controller to guarantee global exponential tracking. The designed controllers are implemented during leg swing experiments in six able-bodied individuals while wearing the knee joint cable-driven exoskeleton. A comparison of the results obtained in two trials with and without using the admittance model (i.e., exploiting cable tension measurements) is presented. The experimental results indicate improved knee joint tracking performance, smaller control input magnitudes, and reduced cable slackness in the trial that leveraged cable tension feedback compared to the trial that did not exploit tension feedback.

Joint Force Analysis and Moment Efficiency Index of Cable-Driven Rehabilitation Devices

Design and Optimization of the New Cable-Driven Ankle Rehabilitation Equipment

Combined kinematic and static analysis of an articulated lower limb traction device for a rehabilitation robotic system

Muscle-inspired bi-planar cable routing: a novel framework for designing cable driven lower limb rehabilitation exoskeletons (C-LREX)

A cable-driven exosuit for upper limbs: design, control, and evaluation

Control strategy and experimental research of a cable-driven lower limb rehabilitation robot

Safety Evaluation and Experimental Study of a New Bionic Muscle Cable-Driven Lower Limb Rehabilitation Robot

Development of a novel cable-driven parallel robot for full-cycle ankle rehabilitation

Ex Situ Sensing Method for the End-Effector's Six-Dimensional Force and Link's Contact Force of Cable-Driven Redundant Manipulators

Cable Tension Analysis Oriented the Enhanced Stiffness of a 3-DOF Joint Module of a Modular Cable-Driven Human-Like Robotic Arm

Closed-Loop Kinematic and Indirect Force Control of a Cable-Driven Knee Exoskeleton: A Lyapunov-Based Switched Systems Approach

Modeling and control of a bedside cable-driven lower-limb rehabilitation robot for bedridden individuals

Optimal Design of a 3-DOF Cable-Driven Upper Arm Exoskeleton

Kinematics and stiffness analysis of a wheelchair-based cable-actuated ankle rehabilitation robot with flexure-based variable-stiffness devices

Force Transmission Analysis and Optimization of Bowden Cable on Body in a Flexible Exoskeleton

An efficient solver for the inverse kinematics of cable-driven manipulators with pure rolling joints using a geometric iterative approach

Design and modeling of motion-decoupling mechanism for cable-driven joints

Design and Human-Robot Coupling Performance Analysis of Flexible Ankle Rehabilitation Robot

A Novel Cable-Driven Joint Module for Space Manipulators: Design, Modeling, and Characterization

Stiffness Analysis of Parallel Cable-Driven Upper Limb Rehabilitation Robot

Kinematic analysis and design optimization of a cable-driven universal joint module