Abstract:Three-dimensional (3-D) open-channeled scaffolds of biopolymers are a promising candidate matrix for tissue engineering. When scaffolds have the capacity to deliver bioactive molecules the potential for tissue regeneration should be greatly enhanced. In order to improve drug-delivery capacity, we exploit 3-D poly(lactic acid) (PLA) scaffolds by creating microporosity within the scaffold network. Macroporous channeled PLA with a controlled pore configuration was obtained by a robotic dispensing technique. In particular, a room temperature ionic liquid (RTIL) bearing hydrophilic counter-anions, such as OTf and Cl, was introduced to the biopolymer solution at varying ratios. The RTIL-biopolymer slurry was homogenized by ultrasonication, and then solidified through the robotic dispensing process, during which the biopolymer and RTIL formed a bicontinuous interpenetrating network. After ethanol wash-out treatment the RTIL was completely removed to leave highly microporous open channels throughout the PLA network. The resultant pore size was observed to be a few micrometers (average 2.43 μm) and microporosity was determined to be ∼ 70%. The microporous surface was also shown to favor initial cell adhesion, stimulating cell anchorage on the microporous structure. Furthermore, in vivo tissue responses assessed in rat subcutaneous tissue revealed good tissue compatibility, with minimal inflammatory reactions, while gathering a larger population of fibroblastic cells than the non-microporous scaffolds, and even facilitating invasion of the cells within the microporous structure. The efficacy of the micropore networks generated within the 3-D scaffolds in loading and releasing therapeutic molecules was addressed using antibiotic sodium ampicillin and protein cytochrome C as model drugs. The microporous scaffolds exhibited significantly enhanced drug loading capacity: 4-5 times increase in ampicillin and 9-10 times increase in cytochrome C compared to the non-microporous scaffolds. The release of ampicillin loaded within the microporous scaffolds was initially fast (∼ 85% for 1 week), and was then slowed down, showing a continual release up to a month. On the other hand, cytochrome C was shown to release in a highly sustainable manner over a month, without showing an initial burst release effect. This study provides a novel insight into the generation of 3-D biopolymer scaffolds with high performance in loading and delivery of biomolecules, facilitated by the creation of microporous channels through the scaffold network. The capacity to support tissue cells while in situ delivering drug molecules makes the current scaffolds potentially useful for therapeutic tissue engineering.

Fabrication of Patterned Three-Dimensional Micron Scaled Core-Sheath Architectures for Drug Patches

Fabrication of Patterned Polymer-Antibiotic Composite Fibers Via Electrohydrodynamic (ehd) Printing

A Novel Approach for Tailored Medicines: Direct Writing of Janus Fibers

Co-printing of Vertical Axis Aligned Micron-Scaled Filaments Via Simultaneous Dual Needle Electrohydrodynamic Printing

Development of Random and Ordered Composite Fiber Hybrid Technologies for Controlled Release Functions

Fabrication of Flexible Composite Drug Films Via Foldable Linkages Using Electrohydrodynamic Printing

Three-Dimensional Electrohydrodynamic Printing and Spinning of Flexible Composite Structures for Oral Multidrug Forms

Designer Fibers from 2D to 3D – Simultaneous and Controlled Engineering of Morphology, Shape and Size

Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing

Engineering On‐Demand Magnetic Core–Shell Composite Wound Dressing Matrices Via Electrohydrodynamic Micro‐Scale Printing

Hydrophilic and hydrophobic drug release from core (polyvinylpyrrolidone)-sheath (ethyl cellulose) pressure-spun fibers

Development of Hybrid 3D-Printed Structure with Aligned Drug-Loaded Fibres Using In-Situ Custom Designed Templates

Direct 3D printing of triple-responsive nanocomposite hydrogel microneedles for controllable drug delivery

Multi-material 3D printed eutectogel microneedle patches integrated with fast customization and tunable drug delivery

Electrospun quad-axial nanofibers for controlled and sustained drug delivery

A Refined Hot Melt Printing Technique with Real-Time CT Imaging Capability.

A novel therapeutic design of microporous-structured biopolymer scaffolds for drug loading and delivery

Hard polymeric porous microneedles on stretchable substrate for transdermal drug delivery

Engineered Robust Hydrophobic/Hydrophilic Nanofibrous Scaffolds with Drug-Eluting, Antioxidant, and Antimicrobial Capacity

Multifunctional Microneedle Patches via Direct Ink Drawing of Nanocomposite Inks for Personalized Transdermal Drug Delivery

Fabrication and Characterization of Core-Shell Electrospun Fibrous Mats Containing Medicinal Herbs for Wound Healing and Skin Tissue Engineering