Abstract:A wearable energy harvester technology is developed for generating electricity from the movement of human joints. A micro-electroplated ferromagnetic nickel cantilever is integrated with a piezoelectric element and bonded on a flexible substrate. Based on the magnetic interaction between the magnetized cantilever and a magnet on the substrate, a novel vertical-vibration frequency-up-conversion (FUC) structure is formed to generate stable amounts of electric energy per cycle from the horizontal substrate stretching/rebounding. The two ends of the flexible substrate are attached on both sides of a limb joint to transform joint rotation into substrate stretching. During limb movement, the flexible substrate is horizontally stretched and rebounded, causing the cantilever to vertically release from and return to the magnet, thereby exciting the piezoelectric cantilever into resonant generation. Since the horizontal low-frequency limb movement is perpendicular to the vertical high-frequency resonance, the stretch has little influence on the resonance of the cantilever. Thus the generated energy is always stable within a wide frequency range of limb movements. The performance of the novel harvester is experimentally verified using a stretching/rebounding movement cycle, where the cycle corresponds to the frequency range of 0.5–5.0 Hz. Within one stretching/rebounding movement cycle, the generated electric energy is stable in the approximate range of 0.56–0.69 μJ for the whole frequency range. Two flexible harvesters are worn on the human elbow and knee for a body kinetic energy harvesting test. Considerable power can always be generated under typical low-frequency limb movements, such as squatting, walking, jogging, and fast running, where the peak-to-peak generated voltages are always approximately 4.0 V. Additionally, energy harvesting under two-directional area stretching is also realized by adjusting the FUC structure layout. The flexible-substrate harvester is promising for various wearable applications.

Magnetostrictive Energy Harvester with Adjustable-Air Gap for Low Frequency Human Walking

Design and analysis of magnetostrictive two-dimensional kinetic energy harvester

Design and Construction of Magnetostrictive Energy Harvester for Power Generating Floor Systems

Magnetic-Spring Based Energy Harvesting from Human Motions: Design, Modeling and Experiments

Magnetostrictive energy generator for harvesting the rotation of human knee joint

Efficiently Harvesting Low-Speed Wind Energy by a Novel Bi-Stable Piezoelectric Energy Harvester from Vortex-Induced Vibration and Galloping

Design and experiment of magnetostrictive-electromagnetic hybrid floor vibration energy harvester

Enhanced Bandwidth Nonlinear Resonance Electromagnetic Human Motion Energy Harvester Using Magnetic Springs and Ferrofluid

An ultra-low-frequency, broadband and multi-stable tri-hybrid energy harvester for enabling the next-generation sustainable power

Design and Fabrication of Rotary Magnetostrictvie Energy Harvester for Knee-Joint Wearable Applications

Wearable Energy Harvesters Generating Electricity from Low-Frequency Human Limb Movement

A Novel Electromagnetic Energy Harvester Based on the Bending of the Sole

An Electromagnetic Wearable 3-Dof Resonance Human Body Motion Energy Harvester Using Ferrofluid As a Lubricant

A Vibration Energy Harvester Using Magnetostrictive/piezoelectric Composite Transducer

Study of a magnetostrictive energy harvester for harvesting transient shock vibration

Gathering energy from ultra-low-frequency human walking using a double-frequency up-conversion harvester in public squares

A low-frequency vibration energy harvester employing self-biased magnetoelectric composite

Bistable Energy Harvesting From Human Motion

A Non-Resonant Piezoelectric–Electromagnetic–Triboelectric Hybrid Energy Harvester for Low-Frequency Human Motions

Scavenging energy from human walking through a shoe-mounted piezoelectric harvester