Abstract:Resonant poles of LCL filters may challenge the entire system stability especially in digital-controlled pulse width modulation (PWM) inverters. In order to tackle the resonance issues, many active damping solutions have been reported. For instance, a notch filter can be employed to damp the resonance, where the notch frequency should be aligned exactly to the resonant frequency of the LCL filter. However, parameter variations of the LCL filter as well as the time delay appearing in digital control systems will induce resonance drifting, and thus break this alignment, possibly deteriorating the original damping. In this paper, the effectiveness of the notch filter-based active damping is first explored, considering the drifts of the resonant frequency. It is revealed that when the resonant frequency drifts away from its nominal value, the phase lead or lag introduced by the notch filter may make itself fail to damp the resonance. Specifically, the phase lag can make the current control stable despite of the resonant frequency drifting, when the grid current is fed back. In contrast, in the case of an inverter current feedback control, the influence of the phase lead or lag on the active damping is dependent on the actual resonant frequency. Accordingly, in this paper, the notch frequency is designed away from the nominal resonant frequency to tolerate the resonance drifting, being the proposed robust active damping. Simulations and experiments performed on a 2.2-kW three-phase grid-connected PWM inverter verify the effectiveness of the proposed design for robust active damping using digital notch filters.

Suppression of Mechanical Resonance in Digital Servo System Considering Oscillation Frequency Deviation.

Analysis of Oscillation Frequency Deviation in Elastic Coupling Digital Drive System and Robust Notch Filter Strategy

Application of Notch Filter for Vibration Suppress in Low Rigidity Servo System

A Novel Method Of Vibration Suppression In Position Servo Systems

Mechanical Resonance Suppression of Servo System Based on ADRC and MAFC

Design and Analysis of Robust Active Damping for LCL Filters Using Digital Notch Filters

Mechanical Resonance Suppression and Disturbance Rejection of Two-Mass System Based on State-Feedback Observer

Mechanical resonance suppression in servo system based on the fractional order low-pass filter

Digital notch filter based active damping for LCL filters

A Modified Bi-Quad Filter Tuning Strategy for Mechanical Resonance Suppression in Industrial Servo Drive Systems

Optimization of the Resonant Frequency Servo Loop Technique in the Resonator Micro Optic Gyro

Suppression of Mechanical Resonance Using Torque Disturbance Observer for Two-Inertia System with Backlash

Vibration Suppression In Position Servo Systems Via Active Disturbance Rejection Control

Mechanical resonance suppression strategy based on shaft torque amplitude limiting control

High-order terminal sliding mode based mechanical resonance suppressing method in servo system

Mechanical resonance suppression of the high-speed parallel robot based on fractional order disturbance observer

Modeling and Analysis of Dynamic Response of Servo Feed System under Low Frequency Excitation

Online Mechanical Resonance Frequency Identification Method Based on an Improved Second-Order Generalized Integrator—Frequency-Locked Loop

Combining Input Shaping and Adaptive Model-Following Control for Vibration Suppression

Physical Interpretation on Anti-resonance of Systems with Mechanical Flexibilities and Its Notch Filter

Adaptive notch filter applied to acceleration harmonic cancellation of electro-hydraulic servo system