Abstract:Three-dimensional (3D) printing provides a novel approach to repair bone defects using customized biomimetic tissue scaffolds. To make a bone substitute closest to natural bone structure and composition, two different types of hydroxyapatite, Nano hydroxyapatite (nHA) and deproteinized bovine bone (DBB), were dispersed into collagen (CoL) to prepare the bioink for 3D printing. In doing so, a porous architecture was manufactured with 3D printing technology. The physical and chemical properties of the materials were evaluated, including biocompatibility and effect on the osteogenic differentiation of the human bone marrow-derived mesenchymal stem cells (hBMSCs). The XPS, XRD, FTIR, and the mechanical analysis of the material indicated that the two HA were consistent in their elements, but different in their chemical bonds and crystal phases. The SEM results showed the different surface morphologies of the HA crystals as well as the scaffolds, which would be the main factors affecting the internal porous structure of the scaffold. There were no differences between the two composite scaffolds in cell proliferations. FITC-phalloidin/vinculin/DAPI staining indicated that hBMSCs can adhere well to the 3D-printed surfaces. Alkaline phosphatase (ALP) staining reflected ALP expressed on both of the osteogenic-induction medium (OM) group, but not on proliferation medium (PM) group. The real-time polymerase chain reaction results showed the expression levels of osteogenesis-related genes RUNX2, SOX9, OCN, and COL1A1 in OM group were significantly increased after 7 days compared with the PM group (p < 0.01). The expression of SOX9, OCN, and COL1A1 in nHA/CoL scaffolds was higher than that in CoL scaffolds (p < 0.05). The expression of OCN and COLIA1 in DBB/CoL scaffolds was higher than that in CoL scaffolds (p < 0.05). In conclusion, the physicochemical and biological properties of 3D bioprinted scaffolds consisting of nHA/CoL or DBB/CoL would be well suited for the scaffolds to being a porous customized bone substitute, 3D printing scaffolds would be a prospective candidate for clinical application in future. Impact Statement Bone loss due to trauma, inflammation, and surgical processes has posed great difficulty in the aesthetic reconstruction of a functional alveolar bone. Tissue engineering and biomaterials, which can promote alveolar bone regeneration, have become a popular focus of current studies. Three-dimensional (3D) printing provides a novel approach to repair bone defects using customized biomimetic tissue scaffolds. Nano hydroxyapatite (nHA) and deproteinized bovine bone (DBB) are two materials mainly used in clinical practice, particularly DBB are widely used in dentistry and craniomaxillofacial orthosis because of the porosity characteristic. To make a bone substitute closest to natural bone structure and composition, nHA and DBB were dispersed into collagen (CoL) to prepare the bioink for 3D printing. The physicochemical and biological properties between the two 3D printing scaffolds were compared. Both nHA/CoL and DBB/CoL 3D printing scaffold would be promising candidate for the clinical applications in the future.

Hydroxyapatite /Collagen 3D printed Scaffolds and their Osteogenic Effects on hBMSCs.

Proliferation and Differentiation of Human Osteoblasts Within 3D Printed Poly-Lactic-co-Glycolic Acid Scaffolds

Hydroxyapatite/Collagen Three-Dimensional Printed Scaffolds and Their Osteogenic Effects on Human Bone Marrow-Derived Mesenchymal Stem Cells

3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration

3D-Printed Hydroxyapatite Microspheres Reinforced PLGA Scaffolds for Bone Regeneration.

Tailorable 3DP Flexible Scaffolds with Porosification of Filaments Facilitate Cell Ingrowth and Biomineralized Deposition

Three dimensional printed macroporous polylactic acid/hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model

3D Printed Nanohydroxyapatite/Polyamide 66 Scaffolds with Balanced Mechanical Property and Osteogenic Ability for Bone Repair

Biodegradable 3D Printed Scaffolds of Modified Poly (Trimethylene Carbonate) Composite Materials with Poly (L-Lactic Acid) and Hydroxyapatite for Bone Regeneration

3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration

Fabrication of High-Strength and Porous Hybrid Scaffolds Based on Nano-Hydroxyapatite and Human-Like Collagen for Bone Tissue Regeneration.

3D Bio-Printing of CS/Gel/HA/Gr Hybrid Osteochondral Scaffolds

Nano-Hydroxyapatite Bone Scaffolds with Different Porous Structures Processed by Digital Light Processing 3D Printing

Preparation and Osteogenic Induction Activity of CBD-BMP2-MP/PLGA 3D Printed Composite Scaffolds

Preparation of gamma poly-glutamic acid/hydroxyapatite/collagen composite as the 3D-printing scaffold for bone tissue engineering

3D Printed Multi-Functional Scaffolds Based on Poly(ε-Caprolactone) and Hydroxyapatite Composites

A Composite Lactide-Mineral 3D-Printed Scaffold for Bone Repair and Regeneration

3D printed biocompatible graphene oxide, attapulgite, and collagen composite scaffolds for bone regeneration

Direct 3-D Printing of Ti-6Al-4V/HA Composite Porous Scaffolds for Customized Mechanical Properties and Biological Functions.

Integrating 3D-Printed PHBV/Calcium Sulfate Hemihydrate Scaffold and Chitosan Hydrogel for Enhanced Osteogenic Property.

Morphologies, mechanical and in vitro behaviors of DLP-based 3D printed HA scaffolds with different structural configurations