Abstract:Reconfigurable optical add-drop filters in future intelligent and software controllable wavelength division multiplexing networks should support hitless wavelength switching and gridless bandwidth tuning. The hitless switching implies that the central wavelength of one channel can be shifted without disturbing data transmissions of other channels, while the gridless tuning means that the filter bandwidth can be adjusted continuously. Despite a lot of efforts, very few integrated optical filters simultaneously support the hitless switching of central wavelength and the gridless tuning of bandwidth. In this work, we demonstrate a hitless add-drop filter with gridless bandwidth tunability on the silicon-on-insulator (SOI) platform. The filter comprises the two identical multimode anti-symmetric waveguide Bragg gratings (MASWBG) which are connected to a loop. The phase apodization technique is utilized to weaken the intrinsic sidelobe interference of grating-based devices. By sequentially manipulating central wavelengths of the two MASWBGs with the thermo-optical effect, we can reconfigure the spectral response of the filter gridlessly and hitlessly. Specifically, the central wavelength of the device is shifted by 14.5 nm, while its 3 dB bandwidth is tuned from 0.2 nm to 2.4 nm. The dropping loss and the sidelobe suppression ratio (SLSR) are dependent on the bandwidth selected. Measured variation ranges of dropping loss and SLSR are from -1.2 dB to -2.5 dB and from 12.8 dB to 21.4 dB, respectively. The hitless wavelength switching is verified by a data transmission measurement at a bit rate of 25 Gbps.

Experimental Demonstration of a Flexible-Grid 1×2 Wavelength-Selective Switch Based on Silicon Microring Resonators.

Design of a Flexible-Grid 1 × 2 Wavelength-Selective Switch Using Silicon Microring Resonators

Flexible-Grid Wavelength-Selective Switch Based on Silicon Microring Resonators with Interferometric Couplers

Silicon-based Flexible-Grid Mode- and Wavelength-Selective Switch Utilizing Microring Resonators and Y-junctions

Polarization-Insensitive Flexible-Grid Wavelength-Selective Switch Based on Tapered Couplers and Microring Resonators

Experimental demonstration of a flexible-grid 1 × (2 × 3) mode- and wavelength-selective switch using silicon microring resonators and counter-tapered couplers

Hitless Wavelength-Selective Switch Based on Single Microring Resonator Embedded with an Equal Armed MZI

Non-volatile Flexible-Grid Wavelength-Selective Switch Using Subwavelength-Grating-ge2sb2te5-assisted Silicon Microring Resonators

Hitless Wavelength-Selective Switch Using a Single Microring Resonator Assisted With a Symmetric MZI

Silicon Photonic Wavelength-Selective Switch Based on an Array of Adiabatic Elliptical-Microrings

Wavelength Switchable Semiconductor Laser Based on Half-Wave Coupled Fabry–Pérot and Rectangular Ring Resonators

Wavelength-selective Blocking and Switching Based on Nested Silicon Microring Resonators

Micromachined Switchable Metamaterial with Dual Resonance

Scalable Nonblocking &Lt;inline-Formula> &Lt;tex-Math Notation="latex">$4\times4$ &Lt;/tex-Math> &Lt;/inline-Formula> Silicon Optical Switch Based on Dual-Microring Resonators

Compact On-Chip 1×2 Wavelength Selective Switch Based on Silicon Microring Resonator with Nested Pairs of Subrings

Experimental Demonstration of an Optical Feynman Gate Using Cascaded Silicon Microring Resonator

Channel-Selectable Optical Link Based on a Silicon Microring for On-Chip Interconnection

Ring-resonator-assisted Optical Switch with High Extinction Ratio

Hitless and Gridless Reconfigurable Optical Add Drop (de)multiplexer Based on Looped Waveguide Sidewall Bragg Gratings on Silicon

1 x N (N=2, 8) Silicon Selector Switch for Prospective Technologies at the 2 m Waveband

Wavelength-Selective 2 × 2 Optical Switch Based on a Ge<inf>2</inf>Sb<inf>2</inf> Te<inf>5</inf>-Assisted Microring for the 2-μm Wavelength Band