Abstract:Shear-induced isothermal crystallization of a commercial isotactic polypropylene ( i PP) has been investigated by using a rotational rheometer at the steady shear rates ranging from 0.00012 s −1 to 1 s −1 , and the temperatures from 135 to 145 °C. Two time scales can be utilized to characterize the crystallization rates: one is the level-upturn onset time of the viscosity; another is that of the normal force. Plotting the onset times against the corresponding onset strain, a common critical value for all the undercooling temperatures can be identified, below which the shear flows have no significant effect on the crystallization rates. Furthermore, we propose a concept of dimensionless onset work; this parameter can make the normalized onset times approximately temperature-invariant in the range of our experiment. Our modeling of the quiescent crystallization is based on the nucleation theory of Ziabicki; the results indicate two-dimensional crystallite growth on pre-existing nuclei. The shear enhanced crystallization is modeled by estimating the excess free energy induced by the flow, and using the rheological model recently proposed by Marrucci, in which the required relaxation times are derived from our rheological measurements. The results imply that the crystallization under the present low shear rates is still two-dimensional crystallite growth on pre-existing nuclei, thus supporting the athermal nucleation theory proposed by Janeschitz-Kriegl. Compared with the experimental data, the modeling is only partially successful. Further improvements encompassing the effects of shear flows on the non-linear increase of the number density of athermal nuclei and on the acceleration of polymer chain disentanglement are needed.

Thermal Analysis and Crystallization Kinetics of Polyurethane

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Effects of Crystallization Temperature of Poly(vinylidene Fluoride) on Crystal Modification and Phase Transition of Poly(butylene Adipate) in Their Blends: a Novel Approach for Polymorphic Control.

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

Nonisothermal Crystallization Kinetics of Poly(vinylidene Fluoride) in a Poly(vinylidene Fluoride)/dibutyl Phthalate/di(2‐ethylhexyl)phthalate System Via Thermally Induced Phase Separation

Crystallization kinetics of thermosensitive colloids probed by transmission spectroscopy.

Crystallization Behavior of Reactive Blends Between Pbs and Pa6icot

Kinetics of Non-Isothermal Crystallization of Syndiotactic 1,2-Polybutadiene

Influence of Cooling Rate on Crystallization Behavior of Semi-Crystalline Polypropylene: Experiments and Mathematical Modeling

STUDY ON CRYSTALLIZATION BEHAVIOR OF ISOTACTIC POLYPROPYLENE PRODUCED BY SUPERCRITICAL POLYMERIZATION

Effect of Phase Separation and Crystallization on Enthalpy Relaxation in Thermoplastic Polyurethane

Effect of Two Crystalline Forms on the Multiple Melting and Crystallization Kinetics of Thermoplastic Polyurethane

Exploring the effect of cooling rate on non-isothermal crystallization of copolymer polypropylene by fast scanning calorimetry

Nonisothermal Crystallization Behavior of A Luminescent Conjugated Polymer, Poly(9,9-Dihexylf Luorene-Alt-2,5didodecyloxybenzene)

Crystallization Kinetics of Ethylene-Co-propylene Rubber/isotactic Polypropylene Blend Investigated Via Chip-Calorimeter Measurement

Non-Isothermal Crystallization Kinetics of Montmorillonite/Polyamide 610 Nanocomposites

Non-isothermal crystalliztion kinetics of poly(phenylene sulfide) with low crosslinking levels

STUDY ON CORRELATION BETWEEN RHEOLOGICAL AND CONDUCTIVE BEHAVIOR THROUGH SIMULTANEOUS MEASUREMENTS DURING ISOTHERMAL CRYSTALLIZATION FOR CARBON BLACK FILLED ISOTACTIC POLYPROPYLENE

Formation of crystal-like structure and effective hard domain in a thermoplastic polyurethane

Crystallization kinetics of poly(vinylidene fluoride)/MMT, SiO 2 , CaCO 3 , or PTFE nanocomposite by differential scanning calorimeter

Rheological scaling and modeling of shear-enhanced crystallization rate of polypropylene