Abstract:Aluminum alloys (AAs) have been broadly used in numerous applications due to their exceptional mechanical properties. Although AAs also exhibit outstanding resistance to general corrosion, they suffer from localized corrosion, such as pitting and crevice corrosion, and can therefore lead to unforeseen catastrophic failure. pH-sensitive smart coatings have been considered to be a promising strategy of combating the localized corrosion of AAs due to the unique self-healing capabilities. These smart coatings can sense the local pH decreases and increases induced by the anodic and cathodic reactions of AAs, respectively, thereby releasing corrosion mediating agents to the actively corroding sites on demand. However, the majority of smart coatings developed to date can only sense either acidic or alkaline condition, but not both. In this study, smart coatings that can respond to both acidic and alkaline environments are developed. These dual-pH sensitive smart coatings are based on weak polyelectrolyte coacervates consisting of polyacrylic acid and polyethylenimine or chitosan. When corrosion inhibitors such as SrCrO 4 or Ce(NO 3 ) 3 are dispersed in these coatings and subsequently immersed in aqueous solutions with different pH values, the release rates of corrosion inhibitors are much higher in the acidic and alkaline environments than that of the neutral environment. Deposition of these inhibitor-loaded smart coatings on AA2024-T3 substrates leads to a significant improvement of the corrosion resistance. Furthermore, corrosion inhibitors are also encapsulated into the core-shell particles and nanofibers through the co-axial electrospray and electrospinning techniques, respectively. The shells of the particles and nanofibers are made from the polyelectrolyte coacervates, so they are dual-pH sensitive. These particles and nanofibers are sandwiched in an organic coating matrix and applied on the AA2024-T3 substrates, forming self-healing smart coatings with substantially improved corrosion resistance as evidenced by the electrochemical impedance spectroscopy analysis. In particular, the nanofibers embedded smart coatings can repeatedly heal the intentionally scribed area of the coated AA2024-T3 owing to the transport of corrosion inhibitors from remote areas through the nanochannels created in core-shell nanofibers.

Corrosion Protection of AA2024-T3 by Cerium Malate and Cerium Malate-Doped Sol–Gel Coatings

Preparation and Corrosion Behaviour of Cerium Based Sol-gel Composite Coatings on AA2024-T4 Aluminum Alloy

Cerium lactate as green corrosion inhibitor of AA2024 alloy

CeO2-filled sol–gel coatings for corrosion protection of AA2024-T3 aluminium alloy

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

An inhibitive system to mitigate the corrosion of AA2024-T3 in 3.5 wt% NaCl solution: Utilizing the synergistic effect of cerium cations and benzimidazole molecules

Sol–gel route to ceria coatings on AA2024-T3 aluminum alloy

Superhydrophobic and self-healing silane-ceria composite coating implanted with 1,5-naphthalenediol inhibitor for corrosion protection of AA2024-T3 aluminum alloy

Catechol/m-Phenylenediamine Modified Sol–Gel Coating with Enhanced Long-Lasting Anticorrosion Performance on 3003 Al Alloy

Duplex Coating Combing Vanadate-Intercalated Layered Double Hydroxide and Ce-Doped Sol–Gel Layers on Aluminum Alloy for Active Corrosion Protection

Enhancement of active anticorrosion via Ce-doped Zn-Al layered double hydroxides embedded in sol-gel coatings on aluminum alloy

Electrodeposition of cerium (III)-modified bis-[triethoxysilypropyl]tetra-sulphide films on AA2024-T3 (aluminum alloy) for corrosion protection

Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

Corrosion inhibition of AA2024-T3 in alkaline solution by disodium-N-dodecyliminodiacetate: Experimental and theoretical studies

Dual pH-Sensitive Smart Coatings for Corrosion Inhibition of AA2024-T3

Benzotriazole and cerium chloride as corrosion inhibitors for AA2024-T3: An EIS investigation supported by SVET and ToF-SIMS analysis

Lubrication, wear resistance and corrosion protection on aluminum alloy toward multifunctional coatings with nano-CeO2 inhibition effect

Eco-friendly rosin-based 6-dehydroabietic acylamino sodium as corrosion inhibitor for AA2024-T3 in alkaline solution by experimental and theoretical studies

Electrochemical Study of Corrosion Behavior of Rare Earth Based Chemical Conversion Coating on Aerospace Aluminum Alloy

Designing of anti-corrosive poly (γ-glycidoxypropyltriethoxysilane)-coated aluminum alloy via electro-polymerization: effect of cerium nitrate concentration