Abstract:In this study, a flexible and freestanding K‐rich KFeHCF/CC electrode is prepared by cathodic deposition to form the cathode in a flexible K‐ion battery (KIB). The flexible and wearable tubular KIB constructed with the potassium‐rich iron hexacyanoferrate cathode shows excellent flexibility, high capacity, and good stability. The results show that the electrode materials have a large potential in flexible potassium‐ion energy storage devices. The fast development of flexible and wearable electronics increases the demand for flexible secondary batteries, and the emerging high‐performance K‐ion batteries (KIBs) have shown immense promise for the flexible electronics due to the abundant and cost‐effective potassium resources. However, the implementation of flexible cathodes for KIBs is hampered by the critical issues of low capacity, rapid capacity decay with cycles, and limited initial Coulombic efficiency. To address these pressing issues, a freestanding K‐rich iron hexacyanoferrate/carbon cloth (KFeHCF/CC) electrode is designed and fabricated by cathodic deposition. This innovative binder‐free and self‐supporting KFeHCF/CC electrode not only provides continuous conductive channels for electrons, but also accelerates the diffusion of potassium ions through the active electrode–electrolyte interface. Moreover, the nanosized potassium iron hexacyanoferrate particles limit particle fracture and pulverization to preserve the structure and stability during cycling. As a result, the K‐rich KFeHCF/CC electrode shows a reversible discharging capacity of 110.1 mAh g−1 at 50 mA g−1 after 100 cycles in conjunction with capacity retention of 92.3% after 1000 cycles at 500 mA g−1. To demonstrate the commercial feasibility, a flexible tubular KIB is assembled with the K‐rich KFeHCF/CC electrode, and excellent flexibility, capacity, and stability are observed.

Flexible Sub-Micro Carbon Fiber@CNTs As Anodes for Potassium-Ion Batteries.

Encapsulating segment-like antimony nanorod in hollow carbon tube as long-lifespan, high-rate anodes for rechargeable K-ion batteries

Free-Standing Nitrogen-Doped Cup-Stacked Carbon Nanotube Mats for Potassium-Ion Battery Anodes

In Situ Transmission Electron Microscopy Study of Electrochemical Sodiation and Potassiation of Carbon Nanofibers

High rate and long cycle life porous carbon nanofiber paper anodes for potassium-ion batteries

Freestanding CNT-modified graphitic carbon foam as a flexible anode for potassium ion batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

Boosting Potassium-Ion Storage in Large-Diameter Carbon Nanotubes/mop Hybrid.

Flexible Sb-graphene-carbon nanofibers as binder-free anodes for potassium-ion batteries with enhanced properties

Robust carbon nanotube-interwoven KFeSO4F microspheres as reliable potassium cathodes

N-doped Carbon/ultrathin 2D Metallic Cobalt Selenide Core/sheath Flexible Framework Bridged by Chemical Bonds for High-Performance Potassium Storage

Highly nitrogen doped carbon nanofibers with superior rate capability and cyclability for potassium ion batteries

Ultrathin Cobalt-Based Prussian Blue Analogue Nanosheet-Assembled Nanoboxes Interpenetrated with Carbon Nanotubes as a Fast Electron/Potassium-Ion Conductor for Superior Potassium Storage

Nitrogen-Doping-Induced High-Performance Carbon Nanofiber Anodes for Potassium-Ion Storage

Engineered nitrogen-doped hollow carbon nanospheres adhered by carbon nanotubes for capacitive potassium-ion storage

High-Performance Stable Potassium–Sulfur Batteries Enabled by Free-Standing CNT Film-Based Composite Cathodes

Encapsulation of Sn Sub-nanoclusters in Multichannel Carbon Matrix for High-Performance Potassium-ion Batteries

Hybrid Cathodes Composed of K3V2(PO4)3 and Carbon Materials with Boosted Charge Transfer for K-Ion Batteries

Tempura-like carbon/carbon composite as advanced anode materials for K-ion batteries

N, P Codoped Hollow Carbon Nanospheres Decorated with MoSe2 Ultrathin Nanosheets for Efficient Potassium-Ion Storage.

Potassium‐Rich Iron Hexacyanoferrate/Carbon Cloth Electrode for Flexible and Wearable Potassium‐Ion Batteries