Abstract:This paper investigates the nonlinear chatter phenomena in cylindrical plunge grinding process. In this dynamic model analyzed here, the grinding wheel and workpiece are regarded as a damped spring mass system and a slender hinged-hinged Euler-Bernoulli beam respectively, and the regenerative interaction between the workpiece and the grinding stone is treated as the main factor that affects the stability of the grinding process. Because of the regenerative effects on the surfaces of both workpiece and grinding wheel, the current penetration depth of the grinding wheel into the workpiece is presented as the differences between the current and previous positions of grinding wheel and vice verse. Then these penetrations are transformed into regenerative force by multiplied contact stiffness. The contact stiffness, the rotation speeds of the grinding wheel and the workpiece are the key parameters involved in the regenerative force model. And the effects of the three parameters related to the regeneration on the dynamic motions of the grinding process are studied in this paper. To locate the stability boundaries in the parameter space, a continuation algorithm has been established to numerically compute the critical eigenvalues and corresponding parameters. The stability boundaries in the parameter space are obtained as the critical parameters that make the characteristic equations have one pair of pure image eigenvalues and all of the rest have negative real parts. By the obtained stability boundaries, the parameter space is divided into different regions where the grinding process is chatter or chatter free respectively. Following the linear stability analysis, the nonlinear bifurcation analyses are carried out and both supercritical and subcritical Hop bifurcations are found on one stability boundary. Then the Bautin bifurcation theory has been applied to discriminate these different dynamic phenomena, which are seemed contradictory in the former codimension-1 bifurcation analysis. These results show that the regenerative force plays a significant role in inducing chatter in grinding, and the contact stiffness is a key parameter for suppressing chatter. In most work conditions, choosing a softer grinding wheel is suggested. But when one has to grinding hard materials, such as ceramic, glass, hard steels and so on where larger contact stiffness are unavoidable, the rotation speeds of the workpiece and the grinding wheel should be chosen according to the stability analysis, or the unwanted chatter would arise. Another advice is that the parameters should be located not only in the linear stable regions but also far away from the neighborhood of subcritical Hopf bifurcation points where stable steady grinding and large amplitude chatter coexist.

Stability and dynamics of parallel plunge grinding

Theoretical Generalization and Research on the Mechanism of the Unsteady-State Grinding Technique

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Stability Analysis of A Transverse Cylindrical Grinding Process

Non-linear analysis and quench control of chatter in plunge grinding

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

A Novel Approach to Optimizing Grinding Parameters in the Parallel Grinding Process

Nonlinear chatter with large amplitude in a cylindrical plunge grinding process

Bautin Bifurcation Induced Nonlinear Chatter In Cylindrical Plunge Grinding

Regenerative and Frictional Chatter in Plunge Grinding

Grinding Methodology Research for Helical Drill Based on the Biglide Parallel Grinder

Regenerative Chatter in Self-Interrupted Plunge Grinding

Suppression of regenerative chatter in a plunge-grinding process by spindle speed

Regenerative Chatter in A Plunge Grinding Process with Workpiece Imbalance

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

Suppressing Chatter in a Plunge Grinding Process: Application of Variable Rotational Speed of Workpiece

An iterative optimization algorithm for posture and geometric parameters of grinding wheel based on cross-section sensitivity and matching constraints of solid end mills

The Method of the Combined Flat Peripheral Grinding

Interference and grinding characteristics in ultra-precision grinding of thin-walled complex structural component using a ball-end grinding wheel

Optimal Design and Performance Evaluation of Grinding Wheels with Triply Periodic Minimal Surface Lattice Structure

Experimental Study of Time-Dependent Performance in Superalloy High-Speed Grinding with Cbn Wheels