Abstract:The residual stress of machined surface has a crucial influence on the performance of parts. It results in large deviations in terms of the position accuracy, dimension accuracy and service life. The purpose of the present study is to provide a novel semi-empirical residual stress prediction approach for turning Inconel 718. In the method, the bimodal Lorentz function was originally applied to express the residual stress distribution. A statistical model between the coefficients of the bimodal Lorentz function and cutting parameters was established by the random forest regression, in order to predict the residual stress distribution along the depth direction. Finally, the turning experiments, electrolytic corrosion peeling, residual stress measurement and correlation analysis were carried out to verify the accuracy of predicted residual stress. The results show that the bimodal Lorentz function has a great fitting accuracy. The adjusted R2 (Ad-R2) are ranging from 95.4% to 99.4% and 94.7% to 99.6% in circumferential and axial directions, respectively. The maximum and minimum errors of the surface residual tensile stress (SRTS) are 124.564 MPa and 18.082 MPa, those of the peak residual compressive stress (PRCS) are 84.649 MPa and 3.009 MPa and those of the depth of the peak residual compressive stress (DPRCS) are 0.00875 mm and 0.00155 mm, comparing three key feature indicators of predicted and simulated residual stress. The predicted residual stress is highly correlated with the measured residual stress, with correlation coefficients greater than 0.8. In the range of experimental measurement error, the research in the present work provides a quite accurate method for predicting the residual stress in turning Inconel 718, and plays a vital role in controlling the machining deformation of parts.

A Simulation Model for Predicting Surface Integrity Coupled Thermal–mechanical Effect in Turning of Inconel 718 Super Alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Semi-Empirical Prediction of Turned Surface Residual Stress for Inconel 718 Grounded in Experiments and Finite Element Simulations

Finite element simulation of residual stress in machining of Ti-6Al-4V with a microstructural consideration

Semi-Empirical Prediction of Residual Stress Distributions Introduced by Turning Inconel 718 Alloy Based on Lorentz Function

Microstructure-Based Flow Stress Model to Predict Machinability of Inconel 718

Experimental and numerical investigation of Inconel 718 machining with worn tools

Diffuse swelling of the penis in a young adult

Quantitative Study of High-Frequency Fatigue Hole-Edge Stresses in Nickel-Based Single-Crystal Superalloy

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Improving fatigue properties of normal direction ultrasonic vibration assisted face grinding Inconel 718 by regulating machined surface integrity

Prediction model of surface integrity characteristics in ball end milling TC17 titanium alloy

Correlation between Surface Integrity and Low Cycle Fatigue Life of Machined Inconel 718

New strategies for improvement of numerical model accuracy in machining of nickel-based alloy

Cyclic Plasticity Modeling of Nickel-Based Superalloy Inconel 718 under Multi-Axial Thermo-Mechanical Fatigue Loading Conditions

Microstructure evolution, failure mechanism and life prediction of additively manufactured Inconel 625 superalloy with comparable low cycle fatigue performance

Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel

Establishment and experimental verification of a three-dimensional finite element model for residual stress in surface processing of Inconel 718 alloy by laser cladding

Experimental and Modeling Study on Small Fatigue Crack Initiation and Propagation Behavior of Inconel 617

Bone marrow edema of the femoral head and transient osteoporosis of the hip.