Abstract:A 5-DoF fully parallel machining robot (PMR) with attitude coupling motion property holds the potential to realize the high-efficiency and high-quality machining of complex parts with curved surfaces. Mechanistically, this type of 5-DoF fully PMR can achieve no singularity in the workspace after optimum design, allowing the mobile platform to be adjusted to an arbitrary orientation directly and flexibly. To full leverage these mechanical characteristics, the concept of planning orientation paths in a unit spherical coordinate system was proposed in our previous work, thereby enhancing orientation adjustment efficiency. However, challenges in toolpath continuity and computational simplicity still persist. In light of this concern, constraint equations were formulated to ensure continuity between two adjacent B-splines, and a configuration of control points was established to maintain controllable curvature. Building on this, a symmetrical arrangement strategy was introduced to set shape limits for fitted B-splines to achieve high-order continuity, and a corresponding toolpath planning method was developed. To decrease computational complexity during feedrate scheduling, a system of linear constraints was utilized to calculate the feedrate for each point, with the feedrate calculation and interpolation occurring concurrently to generate the motion trajectory in real time. Trajectory planning for S-shaped toolpaths was conducted using the proposed method and the commercial ISG CNC kernel, with comparison results demonstrating that our method significantly improves motion efficiency, reduces computational complexity, and mitigates feedrate and acceleration fluctuations. This study offers a more efficient and effective trajectory planning approach, significantly contributing to the advancement of 5-DoF PMR technology.

A Look-Ahead Transition Algorithm and Jump Motion Planning in Multi-Axis EDM for Shrouded Blisks

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Velocity planning in multi-axis EDM based on a coder-player architecture

High speed feed control algorithm with piecewise linear continuous jounce

AXIS-BASED LOOK-AHEAD INTERPOLATOR FOR MACHINING OF SURFACES REPRESENTED BY NURBS CURVES

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

A New Linear Interpolation Method with Lookahead for High Speed Machining

Motion Planning for Industrial Robots Based on Task Process Decomposition

A Real-time Look-ahead Trajectory Planning Methodology for Multi Small Line Segments Path

A G4 continuous B-spline transition algorithm for CNC machining with jerk-smooth feedrate scheduling along linear segments

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

Sliding-mode Controller and Algorithm for Improving Servo Control of Discharge Gap in Precise Fast Hole EDM

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

Path optimization for multi-axis EDM drilling of combustor liner cooling holes using SCGA algorithm

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

Optimal curvature-smooth transition and efficient feedrate optimization method with axis kinematic limitations for linear toolpath

An integrated trajectory smoothing method for lines and arcs mixed toolpath based on motion overlapping strategy

Smooth trajectory generation based on contour error constraint and parameter correction b-spline

Design of a real-time three-axis controller for contour error reduction based on model predictive control

Spatial Path Planning for Robotic Milling of Automotive Casting Components Based on Optimal Machining Posture

A real-time interpolation strategy for transition tool path with C2 and G2 continuity