Abstract:Aerial manipulator (AM) systems are significantly more effective than both conventional manipulators and flying robots, especially in disaster rescue settings, because they can perform human-like interaction tasks in flight. However, controlling the contact force of an AM is difficult due to the coupling between its flying platform and manipulator. This paper proposes a contact force control framework to address this problem. First, the UAV/AM position response under an external force is studied, and it is theoretically shown that a closed-loop UAV/AM behaves as a spring-mass-damper system. Second, a contact force controller is designed using an inverse-dynamics method. Third, an attitude feed-forward approach is employed to improve the force tracking performance. Then, the real-time contact position is introduced into the control system to achieve interaction with an actively moving environment. Finally, an innovative AM is developed and subjected to flight experiments, validating the proposed framework. An AM’s characteristics in interaction operations are summarized, and general conclusions are drawn. This study is novel in that 1) the contact force control is implemented without relying on force sensors, 2) the whole framework is applicable for controlling a constant/variable contact force with high closed-loop performance, and 3) it can also perform reliable interaction with a dynamic and unknown environment. Note to Practitioners—This study is motivated by the contact force control problem of an aerial manipulator (AM) during interaction operations. Previous approaches have explored the feasibility of controlling contact forces to some extent, but they lack universality and assume a static environment. Ensuring sufficient safety and providing reliable solutions in real-world applications remain challenging. This paper aims to investigate the position response of a closed-loop aircraft system under external forces, without disrupting its existing steady flight. The proposed method transforms contact force control into position control, eliminating the need for a force sensor. A series of aerial experiments were conducted to validate the effectiveness and applicability of the method in various scenarios. Our ongoing work will focus on migrating such an AM system from a laboratory scenario to the real world.

Design and Implementation of a Novel Aerial Manipulator with Tandem Ducted Fans

Mechanical Design, Modelling and Control of a Novel Aerial Manipulator

Robust Control of An Aerial Manipulator Based on A Variable Inertia Parameters Model

Design of a High Performance Dual Arm Aerial Manipulator

Modelling and control of an aerial manipulator consisting of an autonomous helicopter equipped with a multi-link robotic arm

Dynamic Modeling and Controller Design of a Novel Aerial Grasping Robot

Aerial Mobile Manipulator System to Enable Dexterous Manipulations with Increased Precision

Development of an Anthropomorphic and Dexterous Dual-Arm System for Aerial Cooperative Bimanual Manipulation

Enhancing Tool Manipulation of An Aerial Vehicle with A Dynamically Displacing Center-of-Mass

A Lightweight Modular Continuum Manipulator with IMU-based Force Estimation

Physical Interaction Oriented Aerial Manipulators: Contact Force Control and Implementation

Modeling and Nonlinear Dynamic Analysis of Angular Velocity System of 2-DOF Aerial Manipulator

ATDM:An Anthropomorphic Aerial Tendon-driven Manipulator with Low-Inertia and High-Stiffness

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Dynamic Center-of-Mass Displacement in Aerial Manipulation: An Innovative Platform Design

Modular Adaptive Aerial Manipulation under Unknown Dynamic Coupling Forces

Design, Modeling and Dynamic Compensation PID Control of a Fully-Actuated Aerial Manipulation System

Design of an Anthropomorphic, Compliant, and Lightweight Dual Arm for Aerial Manipulation

RotorTM: A Flexible Simulator for Aerial Transportation and Manipulation

A coordinated framework of aerial manipulator for safe and compliant physical interaction

Cable-Driven Unmanned Aerial Manipulator Systems for Water Sampling: Design, Modeling, and Control