Abstract:This paper presents an approach called the mutated model predictive control strategy to reduce switching losses and enhance the efficiency of voltage source inverter (VSI) operating with a three-phase configuration. The high number of semiconductor commutations in VSIs can lead to significant switching losses, which reduces efficiency and requires large heat sinks. Conventional model predictive control (MPC) applies switching states directly to the VSI without modulation; the selection of the optimal state is accomplished by evaluating criterion. However, since the two zero vectors (V0, V7) generate identical output voltage vectors(VVs), only a single zero voltage vector can be chosen. In contrast, the proposed method uses both zero vectors based on the operating condition. The approach involves using a switching strategy with pre-condition to select the suitable zero vector between (V0, V7) and apply it for the next sampling period. The efficacy of the proposed approach is validated by conducting simulations utilizing Matlab/Simulink and PLECS software, as well as an experimental test setup is utilized, which includes a three-phase VSI connected to a resistive-inductive load. The VSI is controlled using a dSPACE MicroLabBOX. The results clearly demonstrate the superiority of the proposed control strategy, specifically in terms of reducing switching losses and improving the efficiency of the VSI.

An Improved Model Predictive Control Strategy to Reduce Common-Mode Voltage for Two-Level Voltage Source Inverters Considering Dead-Time Effects

Model Predictive Control for Quasi-Z Source Inverters with Improved Thermal Performance

Review on Pulse-Width Modulation Strategies for Common-Mode Voltage Reduction in Three-Phase Voltage-Source Inverters

Synthetic Vectors-Based Predictive Control of Dual Three-Phase PMSMs for Current Harmonics Mitigation Considering Average Deception Effect

An improved control strategy for grid-connected voltage source inverters with a LCL filter

Predictive Current Control for Voltage Source Inverters Considering Dead-Time Effect

An Improved Mutated Predictive Control for Two-Level Voltage Source Inverter With Reduced Switching Losses

Common-Mode Voltage Reduction Method Based on Variable Sampling Frequency Finite Control Set-Model Predictive Control for PMSM Drive Systems

Carrier-Based Modulated Model Predictive Control Strategy for Three-Phase Two-Level VSIs

Improved double-vector model predictive control to reduce current THD for ANPC-5L inverters

Improved Three-Vector Based Dead-Beat Model Predictive Direct Power Control Strategy for Grid-Connected Inverters.

Modulated Model-Free Predictive Current Control for Voltage Source Inverters With Stagnation Elimination and Sampling Disturbance Suppression

Virtual Voltage Vector-Based Sequential Model-Free Predictive Control for Multiparalleled NPC Inverters

A new PWM strategy to reduce the common-mode voltage

Double voltage vector model predictive control for grid-connected cascade H-bridge multilevel inverter with fixed switching frequency

A Novel Continuous Control Set Model Predictive Control for LC-Filtered Three-Phase Four-Wire Three-Level Voltage-Source Inverter

High-Efficient Multi-Vector Model Predictive Control with Common-Mode Voltage Suppression

A Virtual Space Vector Model Predictive Control for a Seven-Level Hybrid Multilevel Converter

Improved Model Predictive Control with New Cost Function for Hybrid-Inverter Open-Winding PMSM System Based on Energy Storage Model

Non-Weighted Two-Stage Model Predictive Control Strategy Based on Three-Level NPC Inverter

Modified Synchronized SVPWM Strategies to Reduce CMV for Three-Phase VSIs at Low Switching Frequency