Abstract:Quantitative analysis is an important aspect of surface-enhanced Raman spectroscopy (SERS). However, due to changes in the enhancing performance of SERS substrates, it is difficult to obtain reliable analysis results. In this work, a reliable quantitative method is introduced to overcome this problem by an external standard method. To achieve the external standard method, a self-assembled film of activated carbon nanoparticles is first prepared at the air/liquid (KCl aqueous solution) interface. Next, the activated carbon film transferred onto the surface of a Teflon slice (extraction film) is dipped into a high concentration of analyte to achieve reliable saturated adsorption, and the extraction film under saturated adsorption is called the reference (external standard). The uniformity is very good in one extraction film and thus the extraction film is cut into halves (used to prepare the determinand and reference) to eliminate deviation of different batches. The saturated adsorption time of the extraction film is different for different concentrations of analyte and the concentration can be therefore quantified by saturated adsorption time. Because the enhancing performance of the SERS substrate is almost unchanged in a short time and all of the SERS measurements are conducted at a similar measurement condition (saturated adsorption), the SERS intensity of the determinand and reference is almost the same under saturated adsorption. The SERS intensity of the determinand normalized by the reference is therefore very stable and uniform (approximately equal to "1" under saturated adsorption). The preparation conditions of the determinand and the reference are the same except for the concentration of the analyte, thus the interference can be eliminated by an external standard method. Any perturbations caused by the performance change of colloid substrates can be therefore effectively overcome. Moreover, the saturated adsorption time of the extraction film for different concentrations of analyte has a large time margin. This method is very simple and the cost is very low. Based on this method, a concept of time-discretized quantitative SERS (TDQ-SERS) is introduced. Thus, a reliable, simple, and economic quantitative SERS technique can be achieved.

Quantitative SERS Measurements by Self-Assembled Ultra-Smooth Au Nanosphere Superlattice with Embedded Internal Reference

Ratiometric SERS Quantification of SO2 Vapor Based on Au@Ag-Au with Raman Reporter As Internal Standard.

Self-assembly of Au@Ag Core–shell Nanocubes Embedded with an Internal Standard for Reliable Quantitative SERS Measurements

Lab-On-Capillary Platform for On-Site Quantitative SERS Analysis of Surface Contaminants Based on Au@4-MBA@Ag Core-Shell Nanorods.

Facial Fabrication of Large-Scale SERS-Active Substrate Based on Self-Assembled Monolayer of Silver Nanoparticles on CTAB-Modified Silicon for Analytical Applications

Quantitative Surface-Enhanced Raman Spectroscopy for Field Detections Based on Structurally Homogeneous Silver-Coated Silicon Nanocone Arrays

A Self-Calibrated 2D Nanoarchitecture for Label-Free SERS Quantitation and Distribution Imaging of Target

Background-Free Quantitative Surface Enhanced Raman Spectroscopy Analysis Using Core-Shell Nanoparticles with an Inherent Internal Standard.

Self-Calibration 3D Hybrid SERS Substrate and Its Application in Quantitative Analysis.

Organic Solvent As Internal Standards for Quantitative and High-Throughput Liquid Interfacial SERS Analysis in Complex Media.

Reliable Quantitative SERS Analysis Facilitated by Core–Shell Nanoparticles with Embedded Internal Standards

Quantitative Surface-Enhanced Raman Spectroscopy Through the Interface-Assisted Self-Assembly of Three-Dimensional Silver Nanorod Substrates.

Quantitative SERS sensing mediated by internal standard Raman signal from silica nanoparticles in flexible polymer matrix

Uniform arrangement of gold nanoparticles on magnetic core particles with a metal-organic framework shell as a substrate for sensitive and reproducible SERS based assays: Application to the quantitation of Malachite Green and thiram

A New Approach for Quantitative Surface‐Enhanced Raman Spectroscopy through the Kinetics of Chemisorption

A silver self-assembled monolayer-decorated polydimethylsiloxane flexible substrate for in situ SERS detection of low-abundance molecules

Quantitative SERS Analysis by Employing Janus Nanoparticles with Internal Standards

A three-dimensional gold nanoparticles spherical liquid array for SERS sensitive detection of pesticide residues in apple

Single molecule detection from a large-scale SERS-active Au 79 Ag 21 substrate

Self-assembled activated carbon nanoparticles for reliable time-discretized quantitative surface-enhanced Raman spectroscopy

Large-Area Monolayer Films of Hexagonal Close-Packed Au@Ag Nanoparticles As Substrates for SERS-Based Quantitative Determination.