Abstract:Elevated CO2 levels in a closed space or room are of big concerns in many situations. Controlling the CO2 level within a certain range is one of the most important tasks in a life support system. In this paper, a 10l photobioreactor integrated with a hollow fiber membrane module was constructed to remove CO2 from air by using the photosynthetic microalga, Chlorella vulgaris. The effects of the inlet CO2 concentration and the introduction of the membrane module on microalgal CO2 fixation were investigated. The results showed that the proper inlet CO2 concentration was determined to be 1.0%, based on the description of the growth characteristics of the microalga, and the gas exchange efficiency was improved greatly when the membrane module was adopted. Compared with an ordinary photobioreactor, not only the retention time of the smaller and more uniform gas bubbles in the new membrane-photobioreactor increased from 2s to more than 20s, but also the dissolved oxygen (DO) dropped by a factor of 30, resulting in the enhancement of the CO2 fixation rate from 80 to 260mgl−1h−1. When the operating conditions were controlled at cell density of 2.0×107cellsml−1, inlet gas flow rate of 3lmin−1, and light intensity of 157.6 μEm−2s−1 at 25–30°C, the 1.0% (v/v) CO2 in the input aeration gas could be reduced to 0.3% in the discharged gas. Using normal room air (0.04% CO2) as feed, the CO2 concentration in the discharged gas could be decreased to the boundary value of 0.015%, indicating that the novel membrane-photobioreactor by intensifying the process of CO2 conversion and fixation during the microalgal photosynthesis may be a promising solution to CO2 removal in a closed space or room.

Developing Microporous Fibrous-Diaphragm Aerator to Decrease Bubble Generation Diameter for Improving Microalgal Growth with CO2 Fixation in a Raceway Pond.

Improving Microalgal Growth with Reduced Diameters of Aeration Bubbles and Enhanced Mass Transfer of Solution in an Oscillating Flow Field

Improving Microalgal Growth with Small Bubbles in a Raceway Pond with Swing Gas Aerators.

A novel magnet-driven rotary mixing aerator for carbon dioxide fixation and microalgae cultivation: Focusing on bubble behavior and cultivation performance

Strengthening Mass Transfer of Carbon Dioxide Microbubbles Dissolver in a Horizontal Tubular Photo-Bioreactor for Improving Microalgae Growth

Reduced Generation Time and Size of Carbon Dioxide Bubbles in a Volute Aerator for Improving Spirulina Sp. Growth.

Developing staggered woven mesh aerator with three variable-micropore layers in recycling water pipeline to enhance CO2 conversion for improving Arthrospira growth

Microporous Diaphragm Aerator Improves Flue Gas CO2 Dissolution and Photosynthetic Characteristics of Arthrospira Cells in 660 M2 Raceway Ponds

Three-Stage Shear-Serrated Aerator Broke CO2 Bubbles to Promote Mass Transfer and Microalgal Growth

High-Performance Ultrafine Bubble Aeration on Janus Aluminum Foil Prepared by Laser Microfabrication

Optimizing the Gas Distributor Based on CO2 Bubble Dynamic Behaviors to Improve Microalgal Biomass Production in an Air-Lift Photo-Bioreactor.

Enhanced Removal of Carbon Dioxide and Alleviation of Dissolved Oxygen Accumulation in Photobioreactor with Bubble Tank

Strengthening CO2 dissolution with zeolitic imidazolate framework-8 nanoparticles to improve microalgal growth in a horizontal tubular photobioreactor

Numerical simulation on vortex flow and CO2 bubble aggregation behavior in a raceway pond with diaphragm aerators

Developing a Spiral-Ascending CO2 Dissolver to Enhance CO2 Mass Transfer in a Horizontal Tubular Photobioreactor for Improved Microalgal Growth

A Novel Jet-Aerated Tangential Swirling-Flow Plate Photobioreactor Generates Microbubbles That Enhance Mass Transfer and Improve Microalgal Growth.

Carbon dioxide removal from air by microalgae cultured in a membrane-photobioreactor

Enhancing Microalgal Biomass Productivity with an Optimized Flow Field Generated by Double Paddlewheels in a Flat Plate Photoreactor with CO2 Aeration Based on Numerical Simulation

Experimental and theoretical study on dissolution of a single mixed gas bubble in a microalgae suspension

Dynamic Behavior and Transfer Characteristics of CO2-enriched Bubbles Within Spirulina Sp. Suspension under Various Aeration Conditions Using the High-Speed Imaging Technique

Improving CO2 fixation with microalgae by bubble breakage in raceway ponds with up-down chute baffles.