Abstract:Bromide and natural organic matter (NOM) are both precursors of halogenated disinfection byproducts (DBPs) in drinking water. During drinking water treatment process, chloride-form anion-exchange resin adsorption is expected to be capable of removing these DBP precursors and in the meantime releasing chloride ions. The released chloride as well as the chloride initially present in source water could be oxidized through electrolysis to generate free chlorine for disinfection. Based on the above assumptions, we developed a new disinfection approach using chloride-form anion-exchange resin adsorption followed by electrolysis to control halogenated DBPs. Parameter setup and optimization were performed for resin adsorption and electrolysis processes. Results showed that 93.7% of NOM and 90% of bromide could be removed at a resin dose of 20 mL per 2 L of simulated source water sample with a contact time of 1 h. Meanwhile, 49.5 mg/L of chloride was released from the resin to the water sample via anion-exchange, and the released chloride was further oxidized by electrolysis (Ti/RuO2-IrO2 anode and graphite cathode, current intensity of 0.4 A) to generate free chlorine (5 mg/L as Cl2) within 192 s. With this new approach, formation of total organic halogen, four trihalomethanes, and five haloacetic acids was reduced by 86.4%, 98.5%, and 93.2%, respectively, compared with chemical chlorination alone. Although the new approach might enhance the formation of some phenolic DBPs by decreasing bromide levels in source water, the overall cytotoxicity of the water samples treated with the new approach was significantly decreased by 68.8% according to a human hepatoma cell cytotoxicity assay. Notably, disinfection ability evaluation showed that the new approach achieved 3.36-log10 reductions of three seeded bacteria (Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) in 19 s, suggesting that it was not only effective to E. coli but also effective to the chlorine-resistant bacteria (P. aeruginosa and S. aureus).

Advantages of a ClO2/NaClO Combination Process for Controlling the Disinfection By-Products (dbps) for High Algae-Laden Water

Impact of UV Irradiation on Chlorella Sp. Damage and Disinfection Byproducts Formation During Subsequent Chlorination of Algal Organic Matter

Evaluation of Disinfection Byproduct Formation from Extra- and Intra-Cellular Algal Organic Matters During Chlorination after Fe(vi) Oxidation

Aqueous Chlorination of Algal Odorants: Reaction Kinetics and Formation of Disinfection By-Products

Algae-containing raw water treatment and by-products control based on ClO2 preoxidation-assisted coagulation/precipitation process

Effect of Chlorine Dioxide Pre-Oxidation on Algal Non-Protein Amino Acid Degradation and DBPs Formation During Subsequent Chlor(am)ination

Comparison of Drinking Water Treatment Processes Combinations for the Minimization of Subsequent Disinfection By-Products Formation During Chlorination and Chloramination

Formation of disinfection byproducts upon chlorine dioxide preoxidation followed by chlorination or chloramination of natural organic matter

Disinfection byproducts and their toxicity in wastewater effluents treated by the mixing oxidant of ClO2/Cl2.

Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Impact of Pre-Oxidation on the Formation of Byproducts in Algae-Laden Water Disinfection:Insights from Fluorescent and Molecular Weight

Algal-Rich Drinking Source Water: Effects of Chlorine Pre-oxidation on Algal Growth, Algal Organic Matter, and the Potential of Disinfection By-Products

Is monochloramine pre-oxidation a viable strategy for enhancing the treatment efficiency of algae-laden water with conventional drinking water treatment process?

Ultra-sonication for Controlling the Formation of Disinfection By-Products in the ClO2 Pre-Oxidation of Water Containing High Concentrations of Algae

Anion-exchange resin adsorption followed by electrolysis: A new disinfection approach to control halogenated disinfection byproducts in drinking water

Emerging investigators series: disinfection by-products in mixed chlorine dioxide and chlorine water treatment

Effect of chlorine dioxide on cyanobacterial cell integrity, toxin degradation and disinfection by-product formation

Sequential ClO2-UV/chlorine process for micropollutant removal and disinfection byproduct control

Impact of ClO2 Pre-Oxidation on the Formation of CX3R-type DBPs from Tyrosine-Based Amino Acid Precursors During Chlorination and Chloramination.

Removal of disinfection byproduct precursors and reduction in additive toxicity of chlorinated and chloraminated waters by ozonation and up-flow biological activated carbon process

The formation and control of disinfection by-products using chlorine dioxide