A Vision-Based Displacement Measurement System for Foundation Pit
Chao Mi,Yi Liu,Yujie Zhang,Jiaqi Wang,Yufei Feng,Zhiwei Zhang
DOI: https://doi.org/10.1109/tim.2023.3311069
IF: 5.6
2023-09-15
IEEE Transactions on Instrumentation and Measurement
Abstract:The early displacement monitoring of excavation pits is currently a primary method to prevent pit collapse accidents. However, conventional pit displacement monitoring mainly relies on regular manual measurement or automated professional instrument measurement, which results in high cost, complex operation and deployment, nonreal-time measurement, and nonintuitive data collection. Consequently, this article proposes a method for the visual measurement of 3-D displacement of pits based on a two-stage perspective -point (PNP) algorithm. Initially, markers are installed on the reference points with known 3-D spatial coordinates and on each displacement measurement point of the excavation pit. All markers are scanned sequentially by panning the camera and zooming the lens, ensuring at least two adjacent markers enter the frame and are captured in each shot. Second, the improved histogram of oriented gradients (HOG) combined with support vector machine (SVM) rapid algorithm is utilized to perform quick detection and coarse positioning of each marker in the aforementioned photographs. Third, the subpixel algorithm and image morphology are combined. Based on the coarse positioning, the pixel coordinate values of the markers in the images are calculated. Finally, the two-stage PNP algorithm is applied in a cyclical fashion: by using the known 3-D spatial coordinates and its pixel coordinates of the previous marker to solve for the current camera's 3-D spatial coordinates and pose, the 3-D spatial coordinates of the next marker can be derived using the current camera's 3-D spatial coordinates and pose and the pixel coordinates of the next marker. This cycle continues until the 3-D spatial coordinates of all markers are fully resolved, thereby achieving accurate measurement of the 3-D displacement of the pit. Experimental results show that the accuracy of the pro- osed method is nearly as high as the measurement accuracy of manual total stations, meeting the requirements for daily 3-D displacement measurement of excavation pits. Meanwhile, this method offers the advantages of low cost, simple deployment and operation, and a high degree of automation.
engineering, electrical & electronic,instruments & instrumentation