Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Experimental Study of the Complex Intensified Heat Transfer by Intermittently Inserting Twisted Strips into a Transversely Slotted Tube

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Study on Simulation of Heat Transfer Tubes with Twisted-Tape Inserted

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Analysis of heat transfer characteristics and entransy evaluation of high viscosity fluid in a novel twisted tube

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental and numerical investigation on the flow and heat transfer characteristics of the tube with an integrated internal longitudinal fin

Study of ultrasonic influence on heat transfer and resistance performance of round tube with twisted belt

Experimental study on single-phase heat transfer performance of internal helically finned tubes covering low Reynolds number in turbulent flow

Turbulent flow and heat transfer in a new type of internally torsion-ribbed helical tube

Visualization experiment and thermal-hydraulic behaviour of assembled self-rotating twisted tape in double-pipe heat exchangers

Evaluation of thermal performance factor by hybrid nanofluid and twisted tape inserts in heat exchanger

Study on shell side heat transport enhancement of double tube heat exchangers by twisted oval tubes

Tubes with Heat Transfer Property Intensified by Multi-longitudinal Vortices According to the Field Coordination Theory

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model

Experimental and Numerical Investigations on Thermal-Hydraulic Performance of Three-Dimensional Overall Jagged Internal Finned Tubes

Optimization of thermohydraulic performance of tube heat exchanger with L twisted tape

Experimental Investigation on Thermo-Hydraulic Performance of Heat Exchanger Tube with Solid and Perforated Circular Disk Along with Twisted Tape Insert

Convective thermal-hydraulic performance in twisted tubes: From the perspective of symmetrical cross-sectional shapes

Experimental Study on Convective Heat Transfer in Alternating Elliptical Axis Tubes