Abstract:Radiation heat transfer is the dominant model of heat transfer in the large scale industry boiler, especially in oxy-fuel combustion condition. Radiative properties of combustion gases and char oxidation in the oxy-fuel condition are obviously different from the air-fuel combustion, due to the N-2 replaced by CO2. Through researchers proposed many helpful correlations based on the air-fuel Weighted-Sum-of-Grey Gases-Model (WSGGM), the absorption coefficients were commonly constant or correlations were discrete by the classical molar ratio of H2O to CO2 (MR), which were mismatching the continuous value of MR in the real furnace. Meanwhile, the discrete MR is also not applied to the computational fluid dynamics (CFD). In this paper, new correlations for the WSGGM are determined as polynomial function of MR and temperature, which can be conveniently employed in Fluent by the form of user-defined-functions in C language. Parameters of model are fitted by total emittances calculated based on the timely HITEMP 2010 database. New correlations are validated by comparing the emittances with line-by-line calculations and other classical models. New correlations are employed in the CFD for the real industrial oxy-fuel combustion with the temperature range of 400-2600K, pressure path-length between 0.01 and 60 bar m. Several assumed test cases have been investigated to evaluate the accuracy of the models. Modified correlations for WSGGM give a better accuracy of the total emittances for the mixed combustion gases in the real furnace. New models including radiative and chemical reaction mechanisms have been employed to CFD modeling of combustion process for a tangentially fired 300MWe utility boiler. The industrial boiler is modeled by a partition meshing method with the hexahedral structured mesh. Due to the atmosphere shift from N-2 to CO2, three aspects are essential to be modified for oxy-fuel: radiation model, char oxidation model and homogeneous volatile oxidation model. To investigate the performance of the furnace, air-fuel combustion selected as the conference, three other cases employed are defined as Oxy21 (vol21%, O-2), Oxy26 (vol26, 02) and Oxy29 (vol29%, O-2), respectively. Temperature profile and heat transfer are investigated for the different test cases. Meanwhile, the simulation and calculation heat transfer in the furnace are also compared. The results show the new modified simulation has an approximate 4-11% lower than the thermodynamic calculation. To achieve an identical heat flux and temperature distributions with the air-fuel case, the molar fraction 29% of O-2 is essential for the selected implementation. (CSPE)

Study on Heat-transfer Characteristics of a 200 MW Oxy-fuel Coal-fired Boiler

Numerical investigation on oxy-combustion characteristics of a 200MW e tangentially fired boiler

Investigation on the Thermodynamic Calculation of a 35 MWth Oxy-Fuel Combustion Coal-Fired Boiler

Experimental and Numerical Investigations on Heat Transfer Characteristics of a 35MW Oxy-Fuel Combustion Boiler

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Numerical Study on Combustion and Heat Transfer Properties under Oxy-fuel Condition in a 600MW Utility Boiler

Thermodynamic Calculation of Radiative Heat Transfer in a Coal-fired Boiler under an Oxygen Combustion Mode

Study on thermodynamic calculation of a coal-fired boiler retrofitted with pulverized coal oxy-fuel combustion

The Study on the Heat Transfer Characteristics of Oxygen Fuel Combustion Boiler

Influence of gas composition and properties on the combustion and heat transfer characteristics of pulverized oxy-coal boiler

Experimental and Numerical Investigations on Oxy-Coal Combustion in a 35 MW Large Pilot Boiler

Numerical Simulation of Oxy‐fuel Combustion Characteristics in a 200 MWe Coal‐fired Boiler

Study on thermodynamic calculation for O2/CO2 flue gases recycled combustion boiler

Heat Transfer During Oxy-Fuel Combustion And Boiler Design

Study on Energy Efficiency of 35mwth Oxygen-fuel Boiler with Recirculated Flue Gas

Numerical Simulation and Optimization of an SBS-Ⅱ Oxy-fuel Combustion Boiler

The Oxy-fuel Combustion Heat TransferAnalysis Base onModified RadiationModel

Combustion and Heat Transfer Characteristics of Co-Firing Biomass and Coal under Oxy-Fuel Condition

Determination of the Optimal Total Oxygen Concentration and Oxygen Partitioning Ratio Based on the Heat Transfer Characteristics of Oxy-Coal Combustion in a Swirl Burner

New Correlations Of Weighted Sum Of Grey Gases Model Applicable To Computational Fluid Dynamics For Oxy-Fuel Combustion And Implementation

Decoupling Investigation of Furnace Side and Evaporation System in a Pulverized-Coal Oxy-Fuel Combustion Boiler