Abstract:As the fatigue problem of orthotropic steel plates becomes increasingly severe in medium- and long-span bridges, structural health monitoring of the plates that could identify cracks timely is in great demand. Considering that orthotropic steel plates are of multiple structural elements and complex geometries, it is challenging to locate the cracks accurately. To this end, a novel acoustic emission (AE) source location method based on empirical wavelet transform and long short-term memory neural network was developed for crack monitoring of orthotropic steel plates. Empirical wavelet transform adaptively decomposed prominent components contained in the raw AE signal, of which the one with distinct dispersive modes was selected as the characteristic component to more precisely determine the arrival time through Akiake information criteria. The long short-term memory model established a more exact relationship between the arrival time differences of AE signals at multiple sensors and the source coordinates. With the help of empirical wavelet transform and long short-term memory model, it significantly eliminated the influence of dispersion, reflection, scattering, multiple propagation paths and noise, and thus guaranteed higher crack location accuracy. Through field experiment on a long-span suspension bridge, where cracks were simulated by artificial AE sources, a comprehensive comparison was carried out among traditional time-of-arrival method, delta-T mapping method, improved delta-T mapping method based on Akiake information criteria and Gaussian process, a counterpart of the proposed method based on empirical wavelet transform and Gaussian process, as well as the proposed method based on empirical wavelet transform and long short-term memory neural network. The location errors and their variations of the proposed method were found far less than those of the other existing methods. The location accuracy could be further improved by increasing the grid resolution of pencil lead break pre-tests. The results demonstrated the feasibility and superiority of the proposed crack location method for field applications on large-scale complex structures like orthotropic steel plates.

Research on monitoring of aircraft structural components based on blindseparation of single channel AE signal

AE feature extraction and signal representation model based on wavelet packet decomposition

Strong Interference Denoising Method for the Multiple Damage Acoustic Emission Signals of the Aircraft Composite Structures

Blind Source Extraction of Acoustic Emission Signals for Rail Cracks Based on Ensemble Empirical Mode Decomposition and Constrained Independent Component Analysis

Multiple damage detection using sparse blind source separation in composite structures

Acoustic emission detection of fatigue cracks in wind turbine blades based on blind deconvolution separation

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Blind Vibration Sources Separation Method Based on Signal Feature of Aircraft Engine

Blind source separation for aero-engines vibration signal by independent component analysis

Application of Multivariate Acoustic Emission Parameters in Damage Monitoring and Assessment of a Low-Alloyed Steel

The Single Channel Seismic-Acoustic Signal Blind-Source Separation Method Based on EEMD

Identification and Prediction of Fatigue Crack Growth under Different Stress Ratios Using Acoustic Emission Data

Machine‐learning‐based Methods for Crack Classification Using Acoustic Emission Technique

Multiparameter-based separation method for acoustic emission of in-service prestressed hollow slab tire–road noise signals

AE Signal Identification of Offshore Platform Tubular Joints Crack Propagation Based on Wavelet Energy Coefficient

The Aerocraft Health Diagnosis Based on Fuzzy C-means Clustering Analysis and Acoustic Emission Technique

A novel acoustic emission source location method for crack monitoring of orthotropic steel plates

Fast and Robust Strain Signal Processing for Aircraft Structural Health Monitoring

An Inversion Method Based on Inherent Similarity Between Signals for Retrieving Source Mechanisms of Cracks

Acoustical Source Separation and Identification Using Principal Component Analysis and Correlation Analysis

AE signal feature extraction method of metal materials