Abstract:The combination of the piezoelectric effect and photoexcitation properties in ferroelectric/piezoelectric materials used for piezo-photocatalysis is one of the current research hotspots in the field of sewage treatment and environmental remediation. Lead-free ferroelectric BaTi2O5 (BT2) exhibits a strong photoexcitation response and is strongly piezoelectric, so it shows excellent promise as an effective piezo-photocatalyst. Herein, a molten salt method was adopted to prepare a 1D BT2 nanorod with different average aspect ratios, which have been used as piezo-photocatalysts for the first time. The as-prepared BT2 nanorods had an excellent piezoelectric response, as determined by piezo-response force microscopy. The optimal BT2 nanorods were able to piezo-photocatalytically degrade rhodamine B (RhB) with excellent performance. Under ultrasonication and visible-light coexcitation, this catalyst achieved the highest first-order rate constant of k = 0.0353 min–1, 4.24 times higher than the rate constant achieved with ultrasonic excitation alone and 5.42 times higher than that achieved under visible-light irradiation alone. Moreover, the best degradation effect for the removal of quinolones [levofloxacin (LEV)] and other organic pollutants (methylene blue and methyl orange) was also achieved by the BT2 nanorods under ultrasonication and visible-light coexcitation. The internal piezoelectric field caused by bending vibration deflected the photogenerated carriers to the radial direction, which originally flowed toward the ends of the nanorods. This increased the participation of carriers at the active sites and reduced their migration distance. Therefore, the recombination of photogenerated carriers was inhibited, and better piezo-photocatalytic performance for pollutant degradation was achieved. The strong correlation between piezoelectric properties and the coupling effect of piezoelectric-photocatalysis is demonstrated by this work, which offers a strategy to optimize the flow of photogenerated charge carriers in one-dimensional (1D) photocatalysts and, in turn, improve the photocatalytic efficiency of 1D photocatalysts for the degradation of organic pollutants.

Morphology-dependent piezoelectric decontamination of organoarsenicals on BaTiO3: The governing roles of TiO2 precursor and reaction mechanism tailored by surface chemistry

Preparation and Piezoelectric Catalytic Performance of HT-Bi2MoO6 Microspheres for Dye Degradation

Enhanced piezo-catalytic performance of BaTiO3 nanorods combining highly exposed active crystalline facets and superior deformation capability: Water purification and activation mechanism

The Piezocatalytic Degradation of Sulfadiazine by Lanthanum-Doped Barium Titanate

Piezo-activation of Peroxymonosulfate for Benzothiazole Removal in Water.

Efficient enhancement of piezo-catalytic activity of BaTiO 3 -based piezoelectric ceramics via phase boundary engineering

Diffused phase transition boosted dye degradation with Ba (ZrxTi1−x)O3 solid solutions through piezoelectric effect

Efficient Piezocatalytic Effect of SrxBa1−xTiO3 Solid Solution Nanocubes with Inhomogeneous Lattice Strain for Bisphenol A Degradation

Water flow promoted charge separation in piezoelectric Bi4Ti3O12 for the enhanced photocatalytic degradation of antibiotic

Enhanced Piezocatalytic Performance of Li-doped BaTiO3 Through a Facile Sonication-Assisted Precipitation Approach

Dissolved oxygen enhanced piezo-photocatalytic performance in Ag dots-modified BaTiO 3 nanoparticles for efficient degradation of multiple organic pollutants

Three dimensional BaTiO3 piezoelectric ceramics coated with TiO2 nanoarray for high performance of piezo-photoelectric catalysis

Sludge carbon promotes barium titanate piezoelectric property to activate persulfate degradation of enrofloxacin

Effective promoting piezocatalytic property of zinc oxide for degradation of organic pollutants and insight into piezocatalytic mechanism

Piezocatalytic performance of Na0.5Bi0.5TiO3 nanoparticles for degradation of organic pollutants

Progress in the research on organic piezoelectric catalysts for dye decomposition

Piezoelectric Catalytic Performance of BaTiO3 for Sulfamethoxazole Degradation

The synergetic enhancement of piezo catalytic performance to remove tetracycline by K2Ti6O13/TiO2 composite

Modulation of electric dipoles inside electrospun BaTiO3@TiO2 core-shell nanofibers for enhanced piezo-photocatalytic degradation of organic pollutants

A facile method for access to high efficient piezo-photocatalytic synergy of Ba0.85Sr0.15TiO3 through tuning grain size, Curie temperature and energy band gap

Piezoelectric-Enhanced Photocatalytic Performance of BaTi 2 O 5 Nanorods for Degradation of Organic Pollutants