Abstract:Positioning systems are used in a wide range of applications which require determining the position of an object in space, such as locating and tracking assets, people and goods; assisting navigation systems; and mapping. Indoor Positioning Systems (IPSs) are used where satellite and other outdoor positioning technologies lack precision or fail. Ultra-WideBand (UWB) technology is especially suitable for an IPS, as it operates under high data transfer rates over short distances and at low power densities, although signals tend to be disrupted by various objects. This paper presents a comprehensive study of the precision, failure, and accuracy of 2D IPSs based on UWB technology and a pseudo-range multilateration algorithm using Time Difference of Arrival (TDoA) signals. As a case study, the positioning of a 4×4m2 area, four anchors (transceivers), and one tag (receiver) are considered using bitcraze's Loco Positioning System. A Cramér-Rao Lower Bound analysis identifies the convex hull of the anchors as the region with highest precision, taking into account the anisotropic radiation pattern of the anchors' antennas as opposed to ideal signal distributions, while bifurcation envelopes containing the anchors are defined to bound the regions in which the IPS is predicted to fail. This allows the formulation of a so-called flyable area, defined as the intersection between the convex hull and the region outside the bifurcation envelopes. Finally, the static bias is measured after applying a built-in Extended Kalman Filter (EKF) and mapped using a Radial Basis Function Network (RBFN). A debiasing filter is then developed to improve the accuracy. Findings and developments are experimentally validated, with the IPS observed to fail near the anchors, precision around ±3cm, and accuracy improved by about 15cm for static and 5cm for dynamic measurements, on average.

A 3-D Indoor Positioning System Using Asymmetry Double-Sided Two-Way Ranging and Chan Assisted Extended Kalman Filter

Kalman-Filter-Based Integration of IMU and UWB for High-Accuracy Indoor Positioning and Navigation

Ultra-wideband High Precision Positioning System Based on EDS-TWR and EKF Algorithm

An Adaptive IMU/UWB Fusion Method for NLOS Indoor Positioning and Navigation

Analysis and Accuracy Improvement of UWB-TDoA-Based Indoor Positioning System

Precise 3-D Indoor Localization Based on Wi-Fi FTM and Built-In Sensors.

A Toa/Imu Indoor Positioning System by Extended Kalman Filter, Particle Filter and Map Algorithms

UWB Indoor Positioning Application Based on Kalman Filter and 3-D TOA Localization Algorithm

A Three-Dimensional Wireless Indoor Localization System

2-D Indoor Passive Real-Time Location System Based on Ultrawideband Technology

An Enhanced Indoor Ranging Method Using CSI Measurements with Extended Kalman Filter.

Phase Calibration Based Three-Dimensional Beamspace Matrix Pencil Algorithm for Indoor Passive Positioning and Tracking

A CSI-Based Indoor Positioning System Using Single UWB Ranging Correction.

A KFL-TDOA UWB Positioning Method Based on Hybrid Location Algorithm

An Accurate Positioning Method Based on Time-Division Strategy for Indoor Moving Target

Time-Reversal Indoor Positioning with Centimeter Accuracy Using Multi-Antenna Wifi

High-Accuracy WiFi-Based 3D Indoor Positioning Using Non-Uniform Planar Array

3D Indoor Position Estimation Based on a UDU Factorization Extended Kalman Filter Structure Using Beacon Distance and Inertial Measurement Unit Data

Passive Radio Frequency-based 3D Indoor Positioning System via Ensemble Learning

The Design of Indoor Positioning Prototype Based on Wi-Fi