Research on Key Technology and Implementation of Detection and Analysis of Satellite Attitude Jitter Using Remote Sensing Imagery
王凤香,刘世杰,童小华,唐新明,徐聿升,叶真,李凌云,谢俊峰,李天鹏
DOI: https://doi.org/10.3724/sp.j.1047.2015.00724
2015-01-01
Abstract:With the development of high resolution satellites, the attitude jitter, which is a common and complex phenomenon, has become a key problem in the applications of high resolution remote sensing images. It leads to the degradation of image quality, and non-steady and lower precision for the attitude measurement data. Therefore, in this paper, a jitter detection and analysis method based on remotely sensed imagery is proposed. It took the advantage of the imagery data to detect jitter without additional involvement of high-performance sensors or a large quantity of GCPs. Two different jitter detection methods for different types of sensors are presented,which consist of:(1) jitter detection methods based on multispectral images utilizing parallax between two different bands in the image, and(2) jitter detection methods based on stereo images using triplet stereo images and rational polynomial coefficients(RPCs). With the jitter detection methods, the relative registration error is obtained. Afterwards, we can retrieve the time-dependent attitude jitter. Consequently, the frequency and amplitude of the attitude jitter can be achieved by analyzing and modeling the jitter using cosine functions. To reduce the jitter effect on geo- positioning process, the true attitude information should be estimated from the detected jitter components. An improved sensor model is introduced to take into account the compensation for the attitude jitter. The performance of the improved sensor model is assessed in direct georeferencing. Experiments are conducted with images acquired from the first civilian three-line-array stereo mapping satellite ZY-3. A periodic pattern with a frequency of about 0.65 Hz has been detected. Based on the theories and methods mentioned above,the detection and analysis of satellite attitude jitter system based on remote sensing imagery has been developed using VC++. An image sub-blocking and a parallel computation scheme based on the computer performance is performed, which can improve the efficiency. Test results show that the system can efficiently detect the attitude jitter of 0.1 pixels. Meanwhile, it can model the regular jitter and correct the jitter effect on geo-positioning process. The accuracies for the plain and height directions are improved from 2.1799 m and 3.2497 m to 1.4396 m and 0.7453 m, respectively. This system has a good stability and robustness and has been successfully applied to the ZY-3 ground application system.