Abstract:Use of Unmanned Aerial Vehicles (UAVs) for multiple applications in the fifth generation (5G) mobile communication systems is expected to grow dramatically in the coming future, due to the low cost and larger connectivity range. Hence, temporal and spatial air-to-ground (A2G) channel characteristics will be required to ensure high-reliability A2G links. In this paper, we present a measurement and modeling campaign on the A2G channel at 3.5 GHz in a rural macrocell (RMa) scenario using a three-dimensional propagation multipath channel sounder. The channels were sounded with the horizontal ranges of 300 meters. The transmitter (TX) equipped with two omnidirectional antennas was placed on a quad-rotor UAV which flew horizontally at six altitudes from 50 to 300 meters. The receiver (RX) emulated a user equipment (UE) and placed on the ground. We measured the elevation/azimuth of arrival (EoA/AoA) of the multipath components (MPCs) and obtained the elevation/azimuth rootmean-square spread of arrival (ESA/ASA). We analyze the variation of ESA and ASA with the UAV height, which can support the A2G channel model with height-dependent parameters. Furthermore, we adopt the lognormal probability density function (PDF) to model the ESA and ASA distributions based on the measurement data and compare the proposed models with the 3GPP model. This work provides a reference for the design of the air-borne access networks using the sub-6 GHz (sub-6G) band.

A Survey of Channel Modeling for UAV Communications

A survey of channel modeling for UAV communications

A Comprehensive Survey On Uav Communication Channel Modeling

Channel Modeling for UAV Communications: State of the Art, Case Studies, and Future Directions

UAV Communication Channel Measurement, Modeling, and Application

Three-Dimensional Non-Stationary Geometry-Based Modeling of Sub-THz MIMO Channels for UAV Air-to-Ground Communications.

Towards Connected Unmanned Aerial System: A Channel Modeling Perspective

A Survey on Channel Sounding Technologies and Measurements for UAV-Assisted Communications

Measurement and Ray-tracing for UAV Air-to-air Channel Modeling

Channel Characterization And Simulation For Unmanned Aerial Vehicle Communication

Ground-to-UAV sub-Terahertz channel measurement and modeling

Air-to-Ground Channel Characterization for Low-Height UAVs in Realistic Network Deployments

Measurement-Based Characterization and Modeling for Low-Altitude UAV Air-to-Air Channels

Angular Spread Analysis and Modeling of UAV Air-to-Ground Channels at 3.5 GHz

UAV-to-Ground Communications: Channel Modeling and UAV Selection

Low Altitude Air-to-Ground Channel Modelling Based on Measurements in a Suburban Environment

Ray-tracing Simulation and Hybrid Channel Modeling for Low-Terahertz UAV Communications

Unmanned Aerial Vehicle Communications: Path-Loss Modeling and Evaluation.

Measurement-Based Propagation Channel Modeling for Communication between a UAV and a USV

Low Altitude Uav Propagation Channel Modelling

Channel Modeling and Analysis of UAV UV NLOS Communication Scenarios