Abstract:A novel microfluidic picoliter-scale sample introduction approach was developed by combining the spontaneous injection approach with a capillary electrophoresis (CE) system based on a short capillary and slotted-vial array. A droplet splitting phenomenon at the capillary inlet end during the spontaneous sample introduction process was observed for the first time. On the basis of this phenomenon, a translational spontaneous injection approach was established to reduce sample injection volumes to the sub-100 pL range. A versatile high-speed capillary electrophoresis (HSCE) system was built on the basis of this sample injection approach with separation performance comparable to or even better than those reported in microfluidic chip-based CE systems. The HSCE system was composed of a short fused-silica capillary and an automated sample introduction system with slotted sample and buffer reservoirs and a computer-programmed translational stage. The translational spontaneous sample injection was performed by linearly moving the stage, allowing the capillary inlet first to enter the sample solution and then removing it. A droplet was left at the tip end and spontaneously drawn into the capillary by surface tension effect to achieve sample injection. The stage was continuously moved to allow the capillary inlet to be immersed into the buffer solution, and CE separation was performed by applying a high voltage between the buffer and waste reservoirs. With the use of the novel system, high-speed and efficient capillary zone electrophoresis (CZE) separation of a mixture of five fluorescein isothiocyanate (FITC) labeled amino acids was achieved within 5.4 s in a short capillary with a separation length of 15 mm, reaching separation efficiencies up to 0.40 microm plate height. Outstanding peak height precisions ranging from 1.2% to 3.7% RSD were achieved in 51 consecutive separations. By extension of the separation length to 50 mm, both high-speed and high-resolution CZE separation of eight FITC-labeled amino acids could be obtained in less than 21 s with theoretical plates ranging from 163,000 to 251,000 (corresponding to 0.31-0.20 microm plate heights). The present HSCE system also allowed fast chiral separations of FITC-labeled amino acids under micellar electrokinetic chromatography (MEKC) mode within 6.5 s.

Inkjet Printing Based Separation of Mammalian Cells by Capillary Electrophoresis.

Single-Cell Analysis Using Drop-On-Demand Inkjet Printing and Probe Electrospray Ionization Mass Spectrometry

Study of Droplet Formation Process During Drop-on-demand Inkjetting of Living Cell-Laden Bioink.

Accurate And Highly Reproducible Picoliter Injection System For Capillary Electrophoresis

Separation and Determination of Dopamine and Epinephrine in Serum by Capillary Electrophoresis with Inkjet Introduction System

Quantitative On-Line Concentration for Capillary Electrophoresis with Inkjet Sample Introduction Technique

Inkjet Automated Single Cells and Matrices Printing System for Matrix Assisted Laser Desorption/ionization Mass Spectrometry

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

The Use of an Inkjet Injection Technique in Immunoassays by Quantitative On-Line Electrophoretically Mediated Microanalysis.

Inkjet Printing of Viable Mammalian Cells.

Cell patterning through inkjet printing of one cell per droplet

Capillary electrophoresis coupled with automated fraction collection

Capillary electrophoresis Western blot using inkjet transfer to membrane

Drop-by-drop chemical reaction and sample introduction for capillary electrophoresis.

Cell Printing by a Hybrid Pneumatic-electrohydrodynamic Method.

High Throughput Separation of Cells Achieved Through the Particle Characteristic Dielectrophoretic Response and Further Focusing

[Application of Capillary Electrophoresis in Analysis of Intact Mammalian Cells].

Microfluidic Picoliter-Scale Translational Spontaneous Sample Introduction for High-Speed Capillary Electrophoresis

Automated Microfluidic Instrument for Label-Free and High-Throughput Cell Separation

Integration of Single Cell Injection, Cell Lysis, Separation and Detection of Intracellular Constituents on a Microfluidic Chip.