Ph-Controlled Sulfuric Acid Washing Enhancing Heavy Metal Stabilization in Lightweight Aggregate Production from Municipal Solid Waste Incineration Fly Ash
Siyu Han,Kailun Chen,Fanzhi Meng,Yuchen Gao,Jinglin Li,Li Lin,Weikai Qin,Jianguo Jiang
DOI: https://doi.org/10.1016/j.jclepro.2023.139774
IF: 11.1
2023-01-01
Journal of Cleaner Production
Abstract:Municipal solid waste incineration fly ash (FA) is a pressing issue in urban development. In FA treatment, washing is a common dechlorination pre-treatment. During washing, considerable heavy metal would leach due to the abundant alkaline substances, posing challenges to the heavy metal stabilization. Also, with high alkalinity, FA has potential to co-dispose of waste sulfuric acid (hazardous waste). Addressing these, our study presented a novel pH-controlled sulfuric acid washing for FA dechlorination during the sintering preparation of lightweight aggregate (LWA). It was aimed at enhancing heavy metals stabilization and enabling the co-recycling of FA and waste sulfuric acid. By controlling a pH of 10.50 during sulfuric acid washing, the leaching rate of Pb, Cd, Zn, Cu, Ba, and Cr was below 2%, which was a marked improvement over conventional water washing. Sulfuric acid washed FA (SFA) can be used to produce standard-compliant LWA by sintering with bentonite and SiC. The SFA-based LWA stabilized heavy metals more effectively than LWA using FA and water-washed FA. At a 30 wt% addition rate, the stabilized rate of Pb and Cd increased from 11.7% (using FA) to 72.4% (using SFA), and from 6.3% (using FA) to 49.0% (using SFA), respectively. During washing and sintering, XPS analysis further investigated the transformation of Pb, Cu, and Zn into stable states (Pb-glass, Cu2O/CuO, and ZnAl2O4), enhancing their stabilization. Our study introduces a novel method for co-recycling FA and waste sulfuric acid, offering enhanced environmental sustainability and deeper insights into the mechanism of heavy metal stabilization.