Abstract:Magnesium alloys have shown potential as biodegradable metallic materials for orthopedic applications due to their degradability, resemblance to cortical bone and biocompatible degradation/corrosion products. However, the fast corrosion rate and the potential toxicity of their alloying element limit the clinical application of Mg alloys. From the viewpoint of both metallurgy and biocompatibility, strontium (Sr) was selected to prepare hot rolled Mg-Sr binary alloys (with a Sr content ranging from 1 to 4 wt.%) in the present study. The optimal Sr content was screened with respect to the mechanical and corrosion properties of Mg-Sr binary alloys and the feasibility of the use of Mg-Sr alloys as orthopedic biodegradable metals was investigated by in vitro cell experiments and intramedullary implantation tests. The mechanical properties and corrosion rates of Mg-Sr alloys were dose dependent with respect to the added Sr content. The as-rolled Mg-2Sr alloy exhibited the highest strength and slowest corrosion rate, suggesting that the optimal Sr content was 2 wt.%. The as-rolled Mg-2Sr alloy showed Grade I cytotoxicity and induced higher alkaline phosphatase activity than the other alloys. During the 4 weeks implantation period we saw gradual degradation of the as-rolled Mg-2Sr alloy within a bone tunnel. Micro-computer tomography and histological analysis showed an enhanced mineral density and thicker cortical bone around the experimental implants. Higher levels of Sr were observed in newly formed peri-implant bone compared with the control. In summary, this study shows that the optimal content of added Sr is 2 wt.% for binary Mg-Sr alloys in the rolled state and that the as-rolled Mg-2Sr alloy in vivo produces an acceptable host response.

Microstructure, Mechanical Properties, Bio-Corrosion Properties and Cytotoxicity of As-Extruded Mg-Sr Alloys.

Effect of Extrusion on Mechanical Property, Corrosion Behavior, and In Vitro Biocompatibility of the As-Cast Mg-Zn-Y-Sr Alloy

Effect of extrusion on the microstructure and corrosion behavior of Mg-Zn-Mn-(0, 1.5)Sr alloys in Hank’s solution

Microstructure, Mechanical Properties, Corrosion Behavior and Biocompatibility of As-Extruded Biodegradable Mg–3Sn–1Zn–0.5Mn Alloy

Microstructural Characterization and Mechanical Properties of Mg-Zr-Ca Alloys Prepared by Hot-Extrusion for Biomedical Applications

In Vitro Cytocompatibility and Osteogenic Potential of Biodegradable Mg–Sr Alloys

Preparation and Characterization of As-Extruded Mg–Sn Alloys for Orthopedic Applications

A Study on Corrosion Behaviour of Magnesium Alloys

Micro-galvanic Corrosion Behavior and Mechanical Properties of Extruded Mg–2Y–1Zn-0.4Zr-0.3Sr Alloys with Different Extrusion Temperament Immersed in Simulated Body Fluids

Microstructure, Mechanical Properties, Biocorrosion Behavior, and Cytotoxicity of As-Extruded Mg–Nd–Zn–Zr Alloy with Different Extrusion Ratios

Effect of Sr on the Microstructure and Biodegradable Behavior of Mg–Zn–Ca-Mn Alloys for Implant Application

Microstructure Characteristics, Mechanical Properties, and In-Vitro Corrosion Behavior of As-Extruded Mg-2Zn-0.5Gd-1Y-0.5Mn Mg Alloys

In vitro and in vivo studies on a Mg-Sr binary alloy system developed as a new kind of biodegradable metal

Microstructural, Mechanical, in Vitro Corrosion and Biological Characterization of an Extruded Zn-0.8Mg-0.2Sr (wt%) As an Absorbable Material.

Effect of original grain size on microstructure and properties of extruded Mg-2Zn-0.2Mn biomedical alloy

A newly developed Mg-Zn-Gd-Mn-Sr alloy for degradable implant applications: Influence of extrusion temperature on microstructure, mechanical properties and in vitro corrosion behavior

Microstructure, Mechanical Properties and Corrosion Behavior of Extruded Mg–Zn–Ag Alloys with Single-Phase Structure

Effects of Zn Concentration and Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of As-Extruded Mg-Zn Alloys Produced by Powder Metallurgy

Microstructure, Mechanical Properties, in Vitro Degradation and Cytotoxicity Evaluations of Mg–1.5Y–1.2Zn–0.44Zr Alloys for Biodegradable Metallic Implants

In Vitro Degradation and Cytocompatibility of As-Cast Mg-5Zn-xSr Alloys

Effects Of Strontium Addition On Microstructure, Mechanical Properties, Corrosion Properties And Cytotoxicity Of Mg-1zn-1mn Alloy