Abstract:Optical lenses are among the oldest technological innovations (3000 years ago) and they have enabled a multitude of applications in healthcare and in our daily lives. The primary function of optical lenses has changed little over time; they serve mainly as a light-collection (e.g. reflected, transmitted, diffracted) element, and the wavelength and/or intensity of the collected light is usually manipulated by coupling with various external optical filter elements or coatings. This generally results in losses associated with multiple interfacial reflections, and increases the complexity of design and construction. In this work we introduce a change in this paradigm, by integrating both light-shaping and image magnification into a single lens element using a moldless procedure that takes advantage of the physical and optical properties of mesoporous silicon (PSi) photonic crystal nanostructures. Casting of a liquid poly(dimethyl) siloxane (PDMS) pre-polymer solution onto a PSi film generates a droplet with contact angle that is readily controlled by the silicon nanostructure, and adhesion of the cured polymer to the PSi photonic crystal allows preparation of lightweight (10 mg) freestanding lenses (4.7 mm focal length) with an embedded optical component (e.g. optical rugate filter, resonant cavity, distributed Bragg reflector). Our fabrication process shows excellent reliability (yield 95%) and low cost and we expect our lens to have implications in a wide range of applications. As a proof-of-concept, using a single monolithic lens/filter element we demonstrate: fluorescence imaging of isolated human cancer cells with rejection of the blue excitation light, through a lens that is self-adhered to a commercial smartphone; shaping the emission spectrum of a white light emitting diode (LED) to tune the color from red through blue; and selection of a narrow wavelength band (bandwidth 5 nm) from a fluorescent molecular probe.

Controllable Liquid Colour-Changing Lenses with Microfluidic Channels for Vision Protection, Camouflage and Optical Filtering Based on Soft Lithography Fabrication.

Design and Fabrication of Manual Liquid-Filled Color-Changing Glasses Based on Soft Lithography

A Microfluidic System for Liquid Colour-Changing Glasses with Shutter Shade Effect

Flexible fluidic lens with polymer membrane and multi-flow structure

Microfluidic liquid color-changing glasses controlled by valveless piezoelectric micro-pump

In Situ Fabrication of a Tunable Microlens.

An Automatic Liquid-Filled Colour-Changing Glasses Based On Thermo-Pneumatic Technology

Bioinspired solid–liquid mixed tunable lens with multilayered structure

Moldless Printing of Silicone Lenses With Embedded Nanostructured Optical Filters

Low-cost and facile implementation of microfluidic colour-changing devices using dry film photoresist-based moulds

Bioinspired Color-Changing Photonic Polymer Coatings Based on Three-Dimensional Blue Phase Liquid Crystal Networks.

A Method of Manufacturing Microfluidic Contact Lenses by Using Irreversible Bonding and Thermoforming

A Simple and Robust Way Towards Reversible Mechanochromism: Using Liquid Crystal Elastomer As a Mask

All‐Glass 3D Optofluidic Microchip with Built‐in Tunable Microlens Fabricated by Femtosecond Laser‐Assisted Etching

Transparent and UV Blocking Structural Colored Hydrogel for Contact Lenses.

Self‐Contained Focus‐Tunable Lenses Based on Transparent and Conductive Gels

Liquid Microlens with Tunable Focal Length and Light Transmission

Tunable Microfluidic Optical Devices with an Integrated Microlens Array

Liquid‐phase Integrated 3d Printed Biological Lenses for Lamellar Corneal Substitute

Adaptive Liquid Lens Actuated by Droplet Movement.

Design and Fabrication of Adaptive Lens Based on Liquid Crystal