Abstract:Steel industry is the main industrial source of 'dioxins', i.e. polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF). These arise mainly in the off-gas from sintering plant, yet also other operations, such as continuous casting, and hot and cold rolling could generate albeit minor amounts of dioxins. In this contribution it is verified in how far the incineration of hot rolling sludge (HRS) could contribute to such emissions and, if so, how these could be suppressed at low cost. Spent anion exchange resin (SAER) appeared as a dioxins suppressant during combustion tests of hot rolling sludge in a bench-scale tubular furnace. The reduction efficiency (RE) of PCDD/F and I-TEQ-generation attained 91.1% and 90.2%, respectively, with the addition of 2.5wt.% resin, and the highest dioxins RE reached 97.8% with 10wt.% resin addition. The PCDD/PCDF ratio raised markedly when adding resin, indicating stronger suppression for PCDF- than for PCDD-formation. However, further research is still needed to establish the effect of resin on PCDD/F formation and inhibition during full-scale experiments. The off-gas released by sludge and resin co-combustion was also monitored and the residue analysed by Energy Dispersive Spectrometer (EDS); the results revealed that the SO2 concentration in the off-gas was higher during co-combustion than when burning HRS only. Likewise, the sulphur content in the combustion residue rises with resin addition. Still, the suggestion that suppression of PCDD/F formation should be ascribed to the poisoning of catalytic metal by S-containing compounds seems to be invalidated by the high initial S/Cl-ratio of HRS, even before SAER addition. These surprising findings were further analysed by a scrutiny of fingerprints obtained at the five distinct dosages tested. The relative amount of 2,3,7,8-PCDD/F was remarkably depressed by inhibitor addition and the relative importance of the chlorophenols route strongly expanded. Several reaction schemes, showing the results of further signature analysis are presented and are expected to throw more light on the mechanism of formation and its suppression.

Suppression of Chlorinated Aromatics by Nitrogen and Sulphur Inhibitors in Iron Ore Sintering.

The Effect of Adjusting Sinter Raw Mix on Dioxins from Iron Ore Co-Sintering with Municipal Solid Waste Incineration Fly Ash

Synergistic effect of iron and copper oxides on the formation of persistent chlorinated aromatics in iron ore sintering based on in situ XPS analysis.

Hot Rolling Sludge Incineration: Suppression of PCDD/Fs by Spent Anion Exchange Resins.

Suppression of Dioxins by S-N Inhibitors in Pilot-Scale Experiments.

High temperature suppression of dioxins

De Novo Formation of PCDD/F During Sintering: Effect of Temperature, Granule Size and Oxygen Content

Experiments and reaction simulation for SO2 inhibition on de novo formation of PCDD/Fs

Unintentional Production of Persistent Chlorinated and Brominated Organic Pollutants During Iron Ore Sintering Processes.

Suppressing the formation of chlorinated aromatics by inhibitor sodium thiocyanate in solid waste incineration process

Suppression on PCDD/Fs formation by a novel inhibition system consisting of phosphorous-based compounds coupled with a chlorine-deactivation material

Effect of Ca-Fe oxides additives on NOx reduction in iron ore sintering

Integrated Tests for Removal of Nitric: Oxide with Iron Thiochelate in Wet Flue Gas Desulfurization Systems

Suppression of Dioxins in Waste Incinerator Emissions by Recirculating So2

Inhibition of PCDD/F by adding sulphur compounds to the feed of a hazardous waste incinerator.

Inhibition of de novo synthesis of PCDD/Fs by SO2 in a model system.

Removal of Nitric Oxide from Flue Gas with Iron Thiochelate Aqueous Solution in A Turbulent Contact Absorber

Iron and copper catalysis of PCDD/F formation

Dioxins control as co-processing water-washed municipal solid waste incineration fly ash in iron ore sintering process

Emission characteristics of PM, heavy metals, and dioxins in flue gases from sintering machines with wet and semi-dry flue gas desulfurization systems

Parameters Affecting the Formation Mechanisms of Dioxins in the Steel Manufacture Process.